oriquilt (not verified)

 

5/2 Perle Cotton
EPI: 20, sleyed 2 per dent
PPI: 16 to 24

claudia (not verified)

It looks like you have a good epi for the 5/2 pearl or perle cotton, your ppi is ok, too.

I would suggest you place the yarn rather than beat it.  Pearl cotton can be a little slippery to work with and the best way, I have found, to handle it is to place it with the beater rather than beating hard to get the ppi you want.  Your ppi with a sett of 20 will more likely be around 16 to 18.  Try to just weave and pull the beater gently towards you on a closed shed or on the next shed in the treadling sequence. 

The slipping you describe sounds like you may be beating with a little too much enthusiasm.Keep us posted and include pictures if you can.  It makes it easier to diagnose.

Happy weaving, from one Baby Wolf owner to another,
Claudia

lkautio (not verified)

I think you can beat this square (20 ppi) with a 3/1 and 1/3 twill.  The 24 ppi is probably just too high and obscuring the pattern a bit.

This treadling might fix the problem you are finding by giving a clean beak between the 1/3 and 3/1 sections:

OLD: 1-2-3, 2-3-4, 1-3-4, 4, 1, 2

REVISED: 1-2-3, 2-3-4, 1-3-4, 2, 1, 4 (or: 123, 234, 341, 412, 3, 2, 1, 4)

Laurie Autio

claudia (not verified)

There was an article in Handwoven, the cover shot was 2 blue bath towels.  The weaver donated those towels to our auction over a year ago.  I'll go see if I can find it in amongst the past issues in the bookcase.  It was, I believe in Sept 07 but I'll get back to you once I get a chance to check it out.

I remember those towels, they were really nice!

Claudia

UPBarnGoddess (not verified)

I purchased a Towel Kit from Woolgatherers in Wisconsin when I picked up my loom  The kit is Just the Buff by Lunatic Fringe.  It is 3/2 natural colored cotton for warp and weft in a twill.  I began weaving them today, they are weaving up very nicely.  They are set at 12 epi.

 

 

francorios (not verified)

Hi Lauren,

A lot of those topics are covered in different threads in this group.

Laverne has made an index of frequently asked questions

http://www.weavolution.com/node/6211

Including how do I roll up my weaving as it progresses, how wind a warp for backstrap weaving and more.

Go to the FAQ index page and select the topics you want.

Have a good day!

Franco Rios

Sacramento Calif

Bonnie Datta (not verified)

Hi Jeannine.  I can see that there are warp floats over 7 wefts in this draft, which is something you are trying to avoid, right?  If your drafting program can check for floats you should be able to tie them down and then I think you'd have a very nice design.

Bonnie.

 

jeannine (not verified)

thanks and you were right about the floats.this is the solution found .looks better now i think; longest floats are 5 warps or wefts now.

lkautio (not verified)

If your material has some wool in it you might be ok with the original draft at 6 epc.  Or, you could always check the float length with a 2/2 tie-up instead of a 3/1 or 1/3.  The design is lovely.

Laurie Autio

jeannine (not verified)

I made this sample in the weekend .pickup by hand  i sometimes didn't see the warp clearly( seems i'll need glasses )I think the solid colours stand out more ;the mixed are no so good .