jeannine (not verified)

a photo to show you how it turned out:

Ellen (not verified)

That is BEAUTIFUL! I'll have to do that some day.

claudia (not verified)

Hi Heather,

You can use crochet cotton for anything you would use a mercerized cotton for, such as, napkins, towels, placemats, belts, scarves, etc.  The list is very long.

To calculate the epi or sett you can wrap the yarn around a ruler for 2" with each wrap firmly next to each other.  Count the total for one of the two inches and, if weaving plain weave, divide it in half.  If weaving a twill structure, your sett would be 2/3 of the wraps per inch.  I prefer wrapping for 2 inches to get an accurate count of one inch. 

There are other methods for calculating sett and one is available in the Resources section here on Weavolution.  It appears on our website courtesy of Sharon Alderman. 

Let us know what you decide to make.  Happy weaving,

Claudia

Caroline (not verified)

Heather, you lucky girl! Crochet cotton makes a lovely lacy towel or table mat, it would make a nice firm bag fabric, its a really useful yarn to have. If you don't have very much of it, you could save it to make motifs in Rosepath or try using it on an inkle or backstrap loom where its perfect for a warp faced belt or strap. 

Used with a slightly softer mercerised cotton it will really stand out because of its high twist and sheen so its great in simpler weaves as a feature yarn, and makes a good lacey pattern with something like 3, 1, 2, 1 threading, and treadled the same way and sett slightly wider than you would normally sett a twill.

Or you could use it in an embroidery weave, like Danish Medallions, and some of the inlays; I would suggest raiding your local public library or Guild library for all the older weaving books, particularly the self published ones, as there are some wonderful patterns in those books,

Otherwise have you found the Arizona Archives yet? Lots of free weaving stuff to browse and download:

www.handweaving.net/DAHome.aspx

and its all free!

Whatever you decide to do, have fun and enjoy yourself!

hlf (not verified)

Cool, thanks for the pointers!  I think some lacy runners and place mats might be just the thing!  I've got several cones of the stuff.  I dedicated this weekend to weaving, next weekend to CNCH, and the following two weekends I have to work on my spinning homework.  So many textile options, so little time!  But I will get to this cotton sooner than later!

claudia (not verified)

Robyn,

Every loom is slightly different and the best thing to do is put on a short, like 60" warp, weave it up in plain weave and measure your waste when you reach the point where you can no longer get a shed and weave.  For my Kromski Harp, I average 12" and when I plan a project (try the Project planning on Weavolution, here) I leave 18" just to be sure.  There is nothing worse than a planned 60" scarf that turns out to be 45".

I also have an Emilia and for that loom I can get away with 12" loom waste calculated in the warp.

Claudia

Caroline (not verified)

hi Robyn, There is very little loom waste on a rigid heddle loom as compared to a multishaft loom. However you will need to allow for tying on the warp threads at both ends and approximately the length between the front and back beam which can be unusable on most looms. There is not really anything you can do about this wastage, perhaps you can salvage a couple of inches depending on your tie up, but its neither here nor there in the scheme of things and probably not worth the time and energy spent trying to set it up. You can use the end yarn for fringing, and depending on your finishing technique could use most of it.

Shrinkage is going to depend on the yarn used, and how its fulled.

Many scarf patterns suggest about 86 inches of warp for a 60 inch scarf - this allows 26 inches for loom waste which seems reasonable as this will vary depending on the brand and size of loom. If your yarn is going to shrink, then you will need to allow more to compensate, which is where its a good idea to do a trial run yourself with the yarn thats likely to be used.

There are free scarf patterns available for download at the Interweave Handwoven site here:

www.interweave.com/weave/scarf-of-the-month.asp

At the bottom of the page is a project for rigid heddle looms, including a video, which should help your students.

Loom waste is a fact of life, but the thrums can find further life as fringing, and as weft inserts to create textured highlights in a plain weave pattern.

Hope this helps,

Cheers, Caroline

Easter wishes to all!

 

francorios (not verified)

I plan on about 10 inch of loom waste on each end of the piece, especially for the tieups.

But like Inga Marie, I have learned to use that waste as fringe, especially for scarves, so sometimes I'll plan on more than 10 inches of fringe. I'll twist 10 inches of fringe, tie the knot at 6 or 8 inch then trim the loose yarn.

I am also finding that putting on extra warp allows me some room for experimenting on the warp.

As a handspinner, I will do anything to avoid loom waste, but it is what it is.

Have a good day!

Franco Rios

Caroline (not verified)

I lash my warp as well; it seems like extra work, but saves all the hassles with trying to even out the tension. Its a good trick for beginners to learn, and is mentioned in the Chandler book i think, but I am surprised at the number of books that do not mention it, and the weavers who don't know of it.

Any waste is the ideal length to go into a crazy spinning batt, not that there is much, but nothing gets wasted that way.

francorios (not verified)

Hi Karren,
 
Yes, doing four selvedge work means no waste. It is more work, each piece is done one at a time. That is one disadvantage of rigid heddle weaving.
 
Have a good day!
Franco Rios