Every new hobby brings its own unique challenges to each of us. For me, calcuating the warp ends is my nemesis. The pictures below describe the problem perfectly: I always come up short some number of warp ends for my respective project which creates an unsightly imbalance at both selveges.
I've only been weaving for about 4-months now (go easy :)). I've successfully done a few plain weave projects and I've somewhat completed a waffle weave. This is my first attempt at overshot.
I calculated the threading repeat from the pattern as 44 warp ends. I set this at 16 epi using 5/2 perle. The tabby is 10/2 and pattern is 5/2 perle. This being the tester, I wanted to use matching weft so I could see how the underlying tabby reacted with varying degress of beat pressure. For my final product, I intend to set the warp in 8/2 perle and weft in 3/2 again using 10/2 for the tabby. But, I clearly have some bugs to work out first.
I 'suspect' the problem may be in my sley. I have a 10-dent and a 12-dent reed. For this one I am using the 12-dent. To achieve 16 epi, I sleyed in 1-1-2. The overall project is calculated at 6 block repeats. Assuming my math was right, 44-ends per threading sequence times 6 threading repeats is 264 warp ends. Sleyed in 1-1-2 means I compress every 3rd reed slot or overall 25% of my warp ends leaving me with 198 warp ends in the project. Although I only have 198 slots sleyed, I do have 264 individual heedles threaded according to the pattern and that came out spot on - not a single thread was left dangling.
I have crunched these numbers left and right. EIther I am missing something that is staring me right in the face, or I need to do just what I'm doing: bend a humble knee and grovel for some pointers. Appreciate any attempts to steer me back to the path of progress.
Pattern from Handweaver's Pattern Directory by Anne Dixon

Overall Project View:

Left Edge:

Right Edge:

Comments