jenny,
I am asking you live weight questions in response to your solution for my glimakra victoria issues.
I didnt want to confuse that thread.
so let me make sure I have understood this - the live weight works by wrapping cord around one end of the warp beam and then on the inside tying some heavy weight 13lbs which would be off the floor but close to the floor and on the outside having a lighter weight 2lbs which would be just touching the floor.
the aim being that it would stop the warp from loosening ( as the ratchet did) but that when you wound on there would be enough slipage to mean the warp could move forward.
the aim being to get the balance right so the weights don't move much, the warp stays tense but can wind forward.
my questions are:
1.is there a problem with the warp threads snapping?
2.what happens if the weights are too heavy - does it just mean it is too hard to move forward and how do I know what the right amount of tension is
3. what sort of cord thickness should I use - is the kind you get in weaving supply shops ok
4. on the big loom you have weights on both sides but on the victoria it looks like they are just on one side - is that correct.
5. there is a thin cord with a hook and a metal washer hanging in a large V shape off the back of the loom in the photo - is that part of the weight system too?
I had thought I could also just hang a single weight on the beam that would gradually wind up onto the beam and so every while I would have to unwind it down again - more annoying but the idea is the same and this would be perfect.
Have I understood it?
Patchwork
Comments