I am writing this in memory of Gene Elizabeth Valk, a great weaving mentor and writer. She was a member of the Complex Weavers Historic Manuscript Group and always kept us in fear if we used the term barn loom. We were ALWAYS kindly corrected (in Gene's own way) and instructed to use the term BARN FRAME LOOM. The definition below is from a manuscript published by Gene Valk title "Old Looms Glossary". Gene was encouraged by Janet Meany http://www.weaversfriend.com/index.html to document and write down the terms she was familiar with.
As an update, Janet Meany does have a few copies left, they only printed 200 in the first printing so contact her at the site above for more info.
It is very valuable for a glossary of terms used by 18th and 19th century American weavers who operated their looms by hand and foot power. She also reflected Scottish and English terms as some of the expressions that came to America with those weavers who emigrated.
Here's her definition for BARN FRAME LOOM (3 words, not 2!)
Any of the looms constructed of large beams,with mortise and tenon joinings, and with dowels and/or wedges as fasteners. The beams and cross pieces (girts, rails) support the cloth and warp beams, as well as the harness and beater. Three main types are: four post, sleigh, and cantilevered. Some looms have diagonal braces or supporting struts for added stability. This construction resembling the framing of a barn, gives the looms their name.
In most looms the warp beam is higher than the breast beam. When the beater is pushed back, the arc of the swing brings the warp in the bottom of the shed even with the bottom of the reed and shuttle race. Some looms have adjustable warp beam heights, to allow for the build up of long warps, thus maintaining the warp beam/breast beam relationship.
A weaver's seat may be built into the loom, between the front posts, often tilted and sometimes height adjustable. Some looms have separated benches or stools.
Treadles are generally attached to a treadle block at the rear or front of the loom. Some were attached to the separate weaver's bench and some simply rested on the floor under the front of the loom with ends slung in loops of cord hung from lamms or shafts.
Harness and batten are hung from cross members supported on the upper side rails. Cloth and warp beams are secured by various means to maintain tension on the warp.
The term "barn loom" is woefully incorrect. The looms were never intended to be used in a barn, nor were thy made from re-used barn timbers. They were framed like barns because their makers were famliar with construction methods of early barns and homes. Their framing gives them their name: barn frame looms.
Comments