I am writing this in memory of Gene Elizabeth Valk, a great weaving mentor and writer.  She was a member of the Complex Weavers Historic Manuscript Group and always kept us in fear if we used the term barn loom.  We were ALWAYS kindly corrected (in Gene's own way) and instructed to use the term BARN FRAME LOOM.  The definition below is from a manuscript published by Gene Valk title "Old Looms Glossary".  Gene was encouraged by Janet Meany http://www.weaversfriend.com/index.html to document and write down the terms she was familiar with.

As an update, Janet Meany does have a few copies left, they only printed 200 in the first printing so contact her at the site above for more info.  

It is very valuable for a glossary of terms used by 18th and 19th century American weavers who operated their looms by hand and foot power.  She also reflected Scottish and English terms as some of the expressions that came to America with those weavers who emigrated.

Here's her definition for BARN FRAME LOOM (3 words, not 2!)

Any of the looms constructed of large beams,with mortise and tenon joinings, and with dowels and/or wedges as fasteners.  The beams and cross pieces (girts, rails) support the cloth and warp beams, as well as the harness and beater.  Three main types are:  four post, sleigh, and cantilevered.  Some looms have diagonal braces or supporting struts for added stability.  This construction resembling the framing of a barn, gives the looms their name.  

In most looms the warp beam is higher than the breast beam.  When the beater is pushed back, the arc of the swing brings the warp in the bottom of the shed even with the bottom of the reed and shuttle race.  Some looms have adjustable warp beam heights, to allow for the build up of long warps, thus maintaining the warp beam/breast beam relationship.  

A weaver's seat may be built into the loom, between the front posts, often tilted and sometimes height adjustable.  Some looms have separated benches or stools.

Treadles are generally attached to a treadle block at the rear or front of the loom.  Some were attached to the separate weaver's bench and some simply rested on the floor under the front of the loom with ends slung in loops of cord hung from lamms or shafts. 

Harness and batten are hung from cross members supported on the upper side rails.  Cloth and warp beams are secured by various means to maintain tension on the warp.

The term "barn loom" is woefully incorrect.  The looms were never intended to be used in a barn, nor were thy made from re-used barn timbers. They were framed like barns because their makers were famliar with construction methods of early barns and homes.  Their framing gives them their name: barn frame looms.

Comments

laurafry

This makes total sense.  Thanks for sharing.

Cheers,

Laura

Sara von Tresckow

And let's not forget the vocabulary of the German weavers who immigrated here still in Colonial times - their term for the loom described above was "Bauernwebstuhl" (farmer's or farmhouse loom) and it is also possible that some old German weaver went to a carpenter and ordered "one of those Bauernlooms" and slurred his pronounciation.

I have already seen the term "Bauernwebstuhl" used in texts in other European languages, so this is a sort of universal designation of the loom type.

whiteoakgrandmother (not verified)

I understand the reasoning behind Gene Valk's preferred terminology, but my grandparents and great-grandparents and other old people in my community said "barn loom". Sara's input makes sense to me. A common misconception is that West Virginians were all Scotch-Irish, but in the northern half of the state where I live, the majority of pioneer settlers were German, Dutch (via NY), Swiss, and Swedish descendants of settlers of New Sweden (Delaware+), with a small proportion of Scotch-Irish. The Swedish influence is rarely mentioned in histories. Some immigrated to the colonies in the early 18th century, but those from New Sweden and New Amsterdam came in the mid-17th century, so the style was well established before 19th century immigrations to the plains states. Many of these looms were stored in the barn when no longer in use, adding to the misconception that they were used in the barn.

debmcclintock

no worries on terminology, I just thought I'd share Valk's definition of a barn frame loom (she's from northern New York).  Immigrants from all over brought technology in and were apprentices in many different countries.  Translation is tough and many times doesn't convey what one is trying to explain!

I run into this in Southeast Asia on source of weaving technology, try to get a Thai, a Lao, a Cambodian and a Vietnamese to explain historic flows of weaving technology and you get into another real "exploration" of war tribute and invasions.  I'm not even throwing in the Chinese influence (which I'm practically insulting without explaining which province or ethnic group).  Pictures are always key and respecting differences and where folks are coming from with terms (as in their background and cultural influence) is the important thing.

I lived in Delaware for 20 years so I get the Swedes in Delaware, lots of cross culture there!  It all depends on who wrote the history!

whiteoakgrandmother (not verified)

I lived in Micronesia for several years, and I can appreciate what you are saying. And since I lived almost within sight of Sgt. Yokoi's cave, and only a few hundred yards from where he turned himself in, here is a link to an article involving war and weaving: http://ns.gov.gu/scrollapplet/sergeant3.html

loomyladi (not verified)

I'm looking for thoughts on thoughts on ways to date barn frame looms.  Family history tells only so much as memories are not as old as the loom.

Loom #1 (pics soon) - Current owner (who's 80) remembers her great grandmother weaving on the loom when she was a small child.  Family history tells us that it came from a particular area of the county.  Of course the loom must surely be much older than the 80 known years.  This loom is assembled and working although it is currently undressed.

Loom #2 (pics soon) - I received this loom from a gentlemen who is 84.  He wanted it to be loved.  Treadles are missing as is one support piece, but he was going to go b ack to the barn to look.  His family history and stories puts the loom to about 1880. 

I have a friend who is an expert on wood who is going to look at the looms and see if he can determine anything from that characteristic.  The first loom is very large and the second has weathered to a beautiful silver grey and is smaller and lighter.  I could easily pick up the side frames. 

I would be interested in locating resources on these wonderful old looms. 

Jane

justmel74 (not verified)

Really enjoyed reading this, but the link, sadly, was broken. Would you be able to check it and post again? I find the information invaluable to my current project. Thanks!

debmcclintock

I'm assuming you are talking about the Weaver's Friend link, that is the correct link, it seems to be down, wait a couple of days and retry it.  I'll keep an eye out for a new page but all searchs for the owner, Janet Meany and Weaver's Friend leads back to that page....maybe the server is down

Submitted by debmcclintock on