I have just tossed almost 400 yds of a rayon chenille warp (120 ends, 3 yds long) in the trash. I have never had this problem with rayon chenille before. It is 1450 ypp, I was planning on setting it at 16 epi. I wound 3 strands together - 2 strands of a variegated, 1 strand of solid. The variegated yarn is on very big spools that will not fit in my cone stand, so I wound off smaller cones. I am pathetic at using my cone winder, so that may have added to the problem. Because I wound off the original spool, I think that the grain was opposite the solid yarn, so I wound off a cone of that as well.
Winding the warp was awful. Everything kept getting twisted and tangled no matter what i did. I managed to get the warp wound and tied off, but the yarn was just knotting and twisting. I usually warp back to front, gave up and tried front to back. That was even worse and I finally cut the whole thing off and tossed it.
This morning I decided to try again, this time making the entire warp from the variegated yarn. I wound from the original spools with great difficulty - maybe they are wound too tight, but i had to pull off the spools, then wind the loose yarn onto the warping board. I have over a pound and a half of this stuff and I hope that it doesnt all go this way.
I have the warp tied in about 6 places, not counting the 5 ties around the cross. Before I attempt this again, does anyone have any tips? Could there be something wrong with this entire batch of yarn or is it me? I would still like to make a warp with two or three colors - will I have to wind separate warps and warp front to back?
Thanks for any help. Guess these scarves wont be getting to their intended recipients any time soon.
Gail
Comments