I have just tossed almost 400 yds of a rayon chenille warp (120 ends, 3 yds long) in the trash.  I have never had this problem with rayon chenille before.  It is 1450 ypp, I was planning on setting it at 16 epi.  I wound 3 strands together - 2 strands of a variegated, 1 strand of solid.  The variegated yarn is on very big spools that will not fit in my cone stand, so I wound off smaller cones.  I am pathetic at using my cone winder, so that may have added to the problem.  Because I wound off the original spool, I think that the grain was opposite the solid yarn, so I wound off a cone of that as well.

Winding the warp was awful.  Everything kept getting twisted and tangled no matter what i did.  I managed to get the warp wound and tied off, but the yarn was just knotting and twisting. I usually warp back to front, gave up and tried front to back.  That was even worse and I finally cut the whole thing off and tossed it.

This morning I decided to try again, this time making the entire warp from the variegated yarn.  I wound from the original spools with great difficulty - maybe they are wound too tight, but i had to pull off the spools, then wind the loose yarn onto the warping board.  I have over a pound and a half of this stuff and I hope that it doesnt all go this way.

I have the warp tied in about 6 places, not counting the 5 ties around the cross.  Before I attempt this again, does anyone have any tips?  Could there be something wrong with this entire batch of yarn or is it me?  I would still like to make a warp with two or three colors - will I have to wind separate warps and warp front to back?

Thanks for any help.  Guess these scarves wont be getting to their intended recipients any time soon.

 

Gail

Comments

jennybellairs

How sad that you had to throw so much yarn away.  It sounds like a yarn that needs to be under tension at all times.  I don't think I would attempt winding chenille on the warping board or reel with more than one strand at a time unless I had a lot of experience doing it.  Chenille acts too much like a velvet, and I would never cut velvet with more than one layer at a time because of the way it crawls every time it is touched.

To keep tension on the warp when removing it from the warping board or reel, make a loop in the end, put a stick through the loop and wind it figure 8 style onto the stick.  A trapeze works well to maintain the tension while winding the warp onto the loom.

Jenny

Karren K. Brito

The kinds of problems you are having, I've had with highly or over-twisted yarns.  Strange since chenille is supposed to be a woven yarn.

Anyhow, the answer to handling these problematic yarns is to keep them under tension at all times, as Jenny said.  Easy with a 3 yard warp.  I put a peg in the end near the cross, secure the warp to the peg and then weight(cement block  type weight) it on a tray or in a bowl.  Now back up the weighted end from the warping board, gently pulling it off, but keeping the whole warp taut. You might need another set of hands for the transition from the warping board to the loom.  For back to front  put a long stick or bar in the other end, attach to the back beam and spread. Wind on under constant tension.  The minute you relax the tension the yarns kinks up on itself and the problems start.

Warping more than one end at a time takes fancy finger work, or a warping paddle to make sure no ends cross in the warp and the cross is clear. My yarns still twist around each other back at the cones , so I have to stop and untangle every once in  while.

If you are having trouble with the yarn feeding off the cone smoothly, remember that they are designed to unwind by pulling straight up from the center.  Some times a cardboard box, taller than the cone, can help.  Put a hole in the top and set the cone directly under it, thread the yarn through the hole to unwind.

Claudia Segal (not verified)

The only thing I can add to the good advice from Karren and Jennis to look at some of the tips from Peggy Osterkamp on how to wind a warp unders tension, using a kitstick (as Jenny suggested) to wind the warp off the board or reel and beaming a warp under tension.  If you can make a tapeze, thats a great way to beam the warp. You will find Peggy's tips HERE.

To check if the yarn has lost integrity, do the tension test. Take a strand of the chenille about 12-18" long and hold it firmly between your hands.  If it breaks quickly and easily it may be rotted. There is no need to snap it between your hands, nice firm tension will tell if it can be used for warp. 

Sorry you had to lose the first warp.  Keep us posted on how it goes this time.

Claudia

DebD (not verified)

Claudia,

would chenille that fails the tension test be okay for weft or does the whole thing need to be tossed? 

thanks.

D

Claudia Segal (not verified)

I use everything for weft.  There is no worry about the tension test when you are using an item for weft.  That what I usually do when I have a yarn that fails.  

I have learned that black yarns are particularly susceptible to deteriorating quickly.  Remember that when you purchase some.  Use it soon and often.  I have some black tencel that was a hand me down and it's close to failing so I am using it to make a shawl.  All's well so far with just 12" of weaving to go.

Please post your project so we can all enjoy your work.  Don't hesitate to post items in process.  It's fun to watch as you progress.

Claudia

BTW, I saw I wonderful response to your question about rayon chenille from Su Butler, the doyenne of chenille, in the Rayon Chenille group.  Check it out HERE.

sally orgren

Yes, cones of chenille CAN be bad. Where did you get your chenille and how old is it? I have seen two such cones in the last 10 years. Both were mill ends purchased at sales. 

I also have one sad chenille project that I wove from Lion Brand chenille. It was easy to warp and weave, but imagine my disappointment when the item stayed stiff as a board, even after washing. So not all rayon chenille is created "equal".

When you are winding with several yarns, many weavers don't realize they are adding twist and rotating the yarns when they come around the top peg to make the cross. That is how 2 or 3 yarns can get hopelessly tangled after a few passes. I try and remember to keep my wrist parallel to the warp board. If I start to rotate my wrist when making the cross, it's better to change hands. Remember to keep things parallel. (I use two hands when warping on a board, not one hand to guide the string along the warp path. Using one hand means I will inevitably rotate my wrist and add twist.)

Finally, if a yarn is so rotten that it breaks easily, I wouldn't even use it in the weft. I tired to save a precious yarn like that once, and I was extremely disappointed to find that the finished fabric had a very short shelf life, after I put in all that work. So although it's REALLY hard to do, throw the cone away. (Please don't keep it in the "universal stash" for some other poor weaver to encounter with heartbreaking results.)

 

fibergal

If it sat in the sun, then only the outer edge might have weakened.  If you are going to toss it anyway, wind down an inch into the cone and test the integrity.  Good luck to you.

Ellen (not verified)

I had a cone of black chenille once that I had had for several years, and when I finally decided what to use it for it had become so brittle that it broke when I tried to thread it. Had to toss it all. 

sequel (not verified)

As in 3 strands handled as one end or 3 strands wound together in a bunch and then separated at the cross... or even worse, in the threading?  Handling them in a bunch will not work.  Trust me. 

If you separate the strands with your fingers so that they are side by side on the warping board and separated at the cross should work.  Always go around your first peg clockwise and your last peg counter-clockwise to avoid tangling. 

Guiding Myth (not verified)

It doesn't sound like your chenille is weak only over twisted.  I have worked with overtwisted chenille in the past (it was cotton not rayon) and used the Kite Stick method as suggested by Jenny above with success.

Good Luck!

Submitted by gailc on