I just received my first Toika temple (small 8-11"), but I'm not sure about how to correctly place it near the fell. [I do understand how to correctly set the length of the temple by turning it upside down and holding it against the warp in the reed - then setting the pin so the selvedges are positioned at the base of the temple teeth on each side.]
My question really apples only to metal (not wood) temples. The metal arm ends in the middle of each "head" (which contain the teeth). When the arms are locked together and parallel to the fell, one head/end is closer to the fell (by several picks) than the other end (ie, they are offset). Is the goal to have the arms parallel to the fell? Or should the head/end be the same distance from the fell at both ends (resulting in the arms no longer parallel to the fell)?
To clarify, if If I set BOTH the LEFT and the RIGHT ends of the Toika temple 1/8th inch from the last pick thrown, then the metal arms (which are clamped together in the middle) are no longer parallel to the fell. This doesn't happen with a wooden temple, only the metal Toika (by virtue of its design). Is the fact that BOTH ends are EACH within 1/8th inch from the fell the important factor in placement - or is it that the arms should be parallel to the fell (causing one end to be further away from the fell than the other end)?
Comments