illoominated (not verified)

I think I understand that you warp a thread of each color at the same time.  Won't they get twisted while I'm putting it on the board?  Do I just "fix" that when I'm putting it through the reed? Let's say I'm taking it off the cross and have two blacks in a row.  Do I sley the top black thread and then grab a white and then go back to the black thread so that they'll alternate?  Thanks for your patience.

Claudia Segal (not verified)

It's hard to describe but I'll try again.  As you are winding the warp, you hold the two colors together as if they are one thread.  Keep your index finger between the two threads to prevent the twisting and to prevent a black from landing next to another black.  When you arrive at the cross, treat the two threads as one and wind them together in the cross.  In the end, you will have a 2x2 cross which will make it easier to thread.

Claudia

illoominated (not verified)

Thanks, again.  I'm sure once I see it going on the board it will be obvious. 

sewwhatsports (not verified)

you would wind the warp for a shadow weave?

naturalfibres (not verified)

yes, you would wind the two colours together.

Claudia Segal (not verified)

Wow, nicely done Marie.  Is this the table runner you were planning?  Does it lay flat on the table with the electronics behind it?  I heading over to your projects now and hoping you took pictures of the opposite side.

Claudia

laughingcloud (not verified)

That's a good question.  I think the main cause of your problem with using 3/2 for warp and weft and having trouble with the selvedges is that perle cotton is so murch more dense than  wool that is loftier.  When wool weft meets wool warp it can mesh together more easily.

At this point I don't have a definative solution for your problem but I am researching it with my friend and Cotton Clouds' weaving master, Robin Lynde.  Robin designs and weaves Cotton Clouds' project kits and weaves samples with all our yarns.  I'll get back to you on this by next week.

Robweaves (not verified)

Hi, have we heard back about working selvedges when weaving with cotton?  I would also find this information useful.

tien (not verified)

I don't know about Klippits, but what I typically use is either ouchless hair-ties (fold in half around bout, pull one loop tight through the other) or else a piece of string using Peggy Osterkamp's method: http://www.weaving.cc/leasesticks/nov98tip.html  It's a nice choke tie because it doesn't come loose and is easy to remove.

I've used bag clips for other things and my experience with them is that because they are heavy (relative to a piece of string, anyway), they tend to twist around and get tangled in things if used with long pieces of string (e.g. warps).  Theyr'e great for holding Texsolv heddles, though, and that's what I mostly use them for.

Threshkin (not verified)

I use 6 inch lengths of acrylic yarn.  I tie them in a simple overhand knot.  The roughness of the yarn holds the knot together but it is still easy to remove.  If I need a more secure knot I tie a bow knot like used on shoes.

I tried wire twist ties and was not happy.  They held well enough and were easier to tie initially but they were too stiff and got tangled up in the warp chain.