Marsha A. Knox (not verified)

I was having the most horrible time with my tension using paper and wooden slats...but I gotta tell ya, once I started using my little mini blind slats my weaving tension has improved a million times.  I am not a new weaver and I learned on stiff brown paper.  I MUCH prefer the mini blinds.  Neater, stores easier when not in use, easily replaced, concave so my warp beam doesn't get so huge, and my warp is in PERFECT tension!  I think what really matters is what works best for YOU as an individual.  Can't wait to see some of your pieces.  Weave on Ms. Stephanie.  You will find your comfort zone, it just takes enough hrs sitting at the loom.

Marsha A. Knox (not verified)

5 yrds??? thats 25 ft and I don't think the Rigid heddles are even meant to hold that much yarn.  I was always most comfortable and got my best results with about 12 ft on my Harp.  When ever I got bold enough to use longer warps my ratchet would pop and I would have all of that yarn unrolling on the other end, ruining my project.  Start small would be my suggestion, 25 foot of a hundred or more threads is ALOT to control, especially if you are a beginner.  Just my 2 cents worth.  Hope it helps.

Claudia Segal (not verified)

Used mini-blinds can sometimes be found at the Goodwill or Salvation Army for a good price.  

Did you post the finished project in your profile?  We would all love to see pictures if you have some.  

Claudia

PS I am almost done with 4 napkins in black and white.  I did post an initial picture HERE.  

Theresa Kelley (not verified)

Thank you, Joanne! I am a newbie at this and trying to figure it out as I go. I am also hoping to reduce my yarn stash! Anyway, I did get the effect I wanted for the mats. It was just getting frustrating and I have no one locally to learn from. Thanks for being out there and replying. I'm sure I'll be asking more questions!!!

Theresa

Marsha A. Knox (not verified)

I had the same problem with my RH...so I just got a C clamp from the hardware store and clamp it down tight.  It never slips now.  Does leave a mark on the loom, but I consider my looms working tools, if they don't work then what is their purpose?  However, mostly I use my tapestry loom for weft face weaving.  I built it and it even has a tensioning feature similar to the Mirrix loom.  If you would like to see it please take a look at my blog.   If you want I would be glad to help you build one.  Just contact me at [email protected].  I of course would do this for free, just the fun of helping a fellow weaver.

http://pandulaartscreations.blogspot.com/

kellytwo (not verified)

I have a 24" Kromski Harp and just recently had the front rachet come loose on a project, and I know that this has been talked about before so I wanted to analyze why it happened. I found two reasons. The first was because my tension wasn't tight enough and when my arm bumped the rachet it came loose. When I tightened the tension the problem stopped. But the second reason was my arm bumping the rachet. I just bought a floor loom and didn't have a bench, so I've been reading about what is the right height. I read that your elbows should be above the breast beam, and when I sat down to use my Harp on the stand, my elbows were well below the front beam, so as I was weaving my elbow kept hitting the rachet. So I found a higher seat. I wonder if this may be a reason for others having problems, because when the Harp is on the stand it's pretty high and the seat has to be higher than a normal chair. Just my thoughts, Doreen

claudia (not verified)

Hi Doreen,

I used to have the same problem with my 24" Harp and I followed the directions on measuring chair height and body position (ergonomics, found here) and raised my seat.  Also, before I start beaming a new project, I tighten both the front and the back brakes.  It hasn't been a problem since I began this preweaving practice.

Claudia

Sherri (not verified)

Thanks for the good ideas. I know that when I used them in the class, I did get some wrong, but coming back the next day will be good practice for me.

lkautio (not verified)

Generally you want an open plain weave sett rather than a loose sett.  People usually do huck in 10/2 cotton at 20-24 epi and ppi.  A really open sett (14-16 epi) can be good for transparencies, but is rather sleazy (not durable) for lace.

Laurie Autio

Lauries (not verified)

Thanks Laurie, I have done loose 20 at the most. It does depend on the pattern repeat. I worked on the planning yesterday and I will use 20. This is my first  lace in 10/2 cotton so I wasn't sure. Lauie