Pam Howard (not verified)

Joanne

 

Guess what we just got another 54 inch Glimakra loom donated to the John C. Campbell Folk School weaving

studio................ Woo Hoo!!!!     When I saw it I just jumped for joy.  It is an 8 harness one at that!!!

I do try to have a blend of large looms as well as smaller looms for the teachers that teach at the school.  Now we are up to 5 countermarch looms!!!

I will talk to you in the next month or so. 

 

Pam Howard

Resident Weaver

John C. Campbell Folk School

Brasstown, NC

 

Mary C (not verified)

Does anyone have a picture of a something made from towels?  I'd love to see one.

 

lasnutrias (not verified)

I buy bath towles that have been stained form a linen service for 50 cents a piece. then I wash them in hot water and dye them. my rotery cutter works very well. I am going to cut the strips 3/4 of an inch the next time. these strips also crochet up nice ly.

claudia (not verified)

I have a scarf on the loom now and am heading to the towels next. We desperately need new bath rugs in the second upstairs bathroom (used to be the kids bathroom but everyone is grown and gone).  Can't wait to get back to the loom.  I miss weaving very much.

Claudia

Diane Roeder (not verified)

Hi Joanne,

Not unless I have to; it just seems like a good time to add the other shafts.

 

Diane

Diane Roeder (not verified)

Thank you Joanne for your very complete answer; I understand your response.  Guess it's time to sit down and do some planning!

 

Diane

claudia (not verified)

Diane,

I am sorry your question never got addressed.  I have just tied up my first countermarche so don't think I am qualified to answer.  I believe you need to do this on the next warp because you would need to have all 8 shafts threaded before you could complete the tie up of the lamms.

Hopefully, others will see this and answer.

Claudia

Caroline (not verified)

As Laverne has said, you put the background weft through the complete shed, but you only need to have enough warp threads in that shed lifted up to hold the brocade yarn in place, say 1 in 4 or 1 in 3, depending on how long the floats are, the purpose of the band, and whether it will catch when in use. So while there will be 2 shots in that shed, the ground weft is the only one that goes through between every single warp and the whole length of the shed.

Do you have access to Mary Blacks "Key to Weaving", or"New Key to Weaving"? (same book, different editions) she goes into brocades very thoroughly from the most simple to the most complicated, and explains it very well.

You could also check out a couple of articles on Handweaving.net - those written by Suzanne Baizerman spring to mind, and i think Harriet Tidball and Mary Meigs Atwater wrote about them too, though for the 4 shaft loom, but the principle is the same. There are a lot of weaves with different names that use this technique, but the basics are always the same.

Hope this helps make things a bit clearer.

Thumper70 (not verified)

Thanks very much Laverne,

That was really helpful - and seeing in in action on your work too.

I've scanned throught the article you mentioned (thanks for the link) and am gearing up to give it another go. I've got a larger picture of my work as it is at present on the blog post ( here ) But it only has one line left of my attempt at the brocade. I'll be sure to give it another run then post an update.

 

Thumper70 (not verified)

Hi Caroline,

Thanks for your help - your suggestions about the binder thread - very helpful. I'm not familiar with Mary Black's book - but will look out for it when I'm next up at the Hand Weaver's Studio.

Between your and Laverne's tips I think I'm ready to give it another go. . . . . I'll post an update soon.

Thanks again

Alexis