francorios (not verified)

I love primitive looms!

This sounds like a fun project.

Can you post a picture of your loom?

Have a good day!

francorios (not verified)

I have to agree with Sara.

I had two RH looms, an Erica and an older Beka. I sold the Beka.

1. Both were older models that had Nut & bolt friction holding, not Ratchet and pawl tension

2. Tie-on bars instead of those annoying teeth help make initial tensioning easier

Erica has tie-on bars, Beka had teeth. When I had the Beka, I found that by skipping or doubling up on the teeth I could accomodate different heddle sizes.

3. A "neutral" parking place for the heddle when not in use or doing pickup weaves

Erica has a heddle block with 3 positions, up-neutral-down. Beka had a 2 position heddle blocks and two more unattached heddle blocks for warping.

I have to replace the heddle blocks on the Erica, and I could show to make new blocks.

Have a good day!

miukat (not verified)

 Thanks!  I have a picture of my loom in my first project picture.  

miukat (not verified)

 It's true my loom has wingnuts on it, but I feel my first project went along very well as far as tensioning was concerned, so the only mod I'm going to make is to replace them with larger knob-type wingnuts.  Mine does have teeth, but I didn't find them annoying so far.  I'm not really planning on immersing myself into measuring and planning for now, just playing around.  If I like it well enough, I may ask for a nice one for Christmas.  My heddle blocks only hold it in neutral postion, not up or down, so I definitely want to modify that.  My dad has a jigsaw, so I made a cardboard template of a three position heddle block that holds two heddles, like the ashford kit.  Hopefully we'll make it this week.  Someone on Ravelry directed me to this website  to find inexpensive Beka heddles, so I think I'm going to order and try cutting them down with a saw if necessary.  The mods I'm making aren't too expensive, so if the day comes when I feel I've outgrown my little loom, I'm sure I will be able to sell my loom and accessories and make most of my money back.  Thank you for replying :D

miukat (not verified)

 I would love to see the heddle blocks that you are making!  I made a cardboard template and hope to make mine this week.  Any tips would be greatly appreciated.  Thank you :)  I wonder if it's possible to convert to a ratchet and pawl systerm?

francorios (not verified)

I just saw the pictures of your loom on your project page.

Very cool! The heddles made of wire are a clever idea. Does your warp get hung up on it when you change between up shed and down shed?

How much of a gap is there at the end of the wooden part where the wire heddle ends and then the end of the wood?

Have a good day!

 

francorios (not verified)

*from my blog post today, a picture showing the heddle block on my Erica loom*



Here I am at the end of the warp. You can see how I'm right against the heddle and the far loom bar. I'm trying to push through as many throws as I can before I can't put any more.

Here my heddle is in a DOWN position (weft on the right) and is held down by the heddle block. The heddle block is the U shaped piece of wood on the loom. When in the UP position the bottom wood piece sits on top of the heddle block. The slot in the middle of the heddle block is the Neutral position and is good place to park the heddle for warping up.

This heddle block is cracked and I'll need to make a replacement for it.

** I'm planning to cut heddle block this weekend, Lord willing and the creek don't rise**

Have a good day!

uwimoore (not verified)

I also have an old rigid heddle loom that has no heddle block.  Don't know what kind of loom it is I bought it used.

Could someone post an plain line drawing of a 3 position heddle block. I could then find someone to make one for me.

Thanks

Uwi

 

 

Silverwheelyarn (not verified)

You might want to check with the Woolery.   They are always super helpful when I ask strange questions, even over the phone, can cut custom reeds, and have everything you could ever need if you wanted to go the buying route.

Loominaria (not verified)

Corrected and expanded from earlier post.

Heddle blocks that have only a slot for holding the reed in neutral position (no slots or indentations for up or down shed) should be as tall as the slots on your reed, and positioned on the frame so that the tops align with the plane of the warp between the beams.  The slots on the blocks for neutral position have to be deep enough to match the distance from the bottom of the reed, including the bottom beam, and the hole position on the reed, or less, if your loom has cross beams on top of the frame to elevate the warp above the fabric and warp beams.  Make sense?

I don't know if all manufacturer's reeds are standardized so that the slots are the same height. I can check my Beka, Schacht, and Ashford reeds when I get home tonight.  If they're all the same, you could buy whichever blocks you like.  But if you want to make your own, you just need to measure your reed slots and hole positions.

Checked my reeds--each maker has a different reed height.  Schacht's Cricket reeds are shorter than their old RH reeds; don't know about Schacht Flip reeds.  Ashford's are slightly taller than Schacht.  Beka's are clearly the shortest of my collection.