devorah (not verified)

I have a Churro Fleece and am wondering if I ought to seperate the long courser outer coat from the softer inner one or spin them together for use in a rug. Any suggestions?

sgt_majorette (not verified)

If there's a big difference in the textures, I'd separate them! Maybe if the amounts work, you could use the coarse part for warp and the softer for weft.

francorios (not verified)

Navajo plying is also known as chain plying, since it's like making a chainstitch loop then spinning it.

The best thing about it is you don't have unmatched lengths at the end.

The worst thing is that it is 3 ply, can't do 2 ply or 4 ply.

Have a good day!

Franco Rios

Autumm (not verified)

Yes, yes, yes!!  I love to use handspun.  By handspinning and dyeing I can totally control what my piece is going to do, and of course the feeling of accomplishment is that much greater.

Here's the thing however, my pieces aren't meant to be used on the floor so I do use softer wool than I would for a rug that was to be used.  I like to throw in a little mohair or silk for strength.

I spin singles and two ply, I like the two ply better only for the fluffier wools otherwise I stick with one ply. 

What I don't do is use the Navajo spindle, I spin all my yarn on a wheel or traditional spindle.

I don't however spin my own warp, I love the wool warp that Halycon uses too much to worry about my own not holding up.

sgt_majorette (not verified)

Have you ever tried spinning your own warp? like from Churro or some other longwool? Do you card or comb your fleece? How big are your pieces?

From what I've been reading, people use plied yarn for warp and fluffy singles for weft. I'm thinking I could use some Lincoln spun worsted, fine and plied, lots of twist, for warp, spindlespun; and then soft wheelspun for weft. I've been experimenting with a rigid heddle loom jury-rigged Navajo style, and my warps seem to be holding up. But then I'm just working tiny!

Autumm (not verified)

I have tried to spin some warp, I used Wensleydale, and it worked but I was not nearly as happy with it as I am with the commercial warp.  I actually bought that fiber last year in roving form from a fiber market.  For my weft spinning I use drum carded batts.

With the Halycon wool warp I use the two ply for my small looms, three ply for medium sized frame style looms and the four ply for my Ashford Tapestry loom.  There is lots of twist in the warp, but it's not overstwisted.  I'm sure you can be very happy with your own handspun warp, I guess I've never been a really tight spinner and plyer so that's probably why I didn't like mine as well.

I will do some spinning later this week and try and do some more warp for you, I do still have some of that fiber left, it's really amazing stuff.

Aunt Janet (not verified)

When I first learned how to spin, and didn't know better, I spun warp and weft for Navaho style rug weaving.  They worked just fine.  My first lesson in spinning was on the Navaho spindle.  i'm so glad I learned that way, since it can be nice and slow.  You really get the idea of drafting at that speed.  I've never spun in the Navaho style, though.  I don't think it is necessary, since we can be working with roving that is easy to draft.  I did start out processing everything by hand. 

What about the comment that, Mary "weft singles are essential for weft face technique".  I'd like to know why.  Does it work better?  I was also told that singles are better in shaft switch rug technique.  Just curious to know why singles are considered better. 

Aunt Janet (not verified)

Thanks, Mary Matha, for your explanation on singles.  I'm an experienced spinner, with a lot of hours at the wheel.  I'm pretty fast, consistent, and controlled.  So, if you need somebody to spin karakul singles, I would be willing to do the job for you.  That is a wool breed I haven't tried, yet, so that would be a good experience.  Let me know if you need a spinner.

Aunt janet

jemwork (not verified)

One of my guild's members did this on a work day. I have not used this yet, but it seemed to work fine. She did essencially what Su describes above, but different.

For the hem, she wove 1/2" in the weft yarn, then a shot of something else - something smooth & colored differently. Another 1/2", another shot of something else. After weaving the body of the item, she wove the same hem at the end.

When ready to hem, she pulled the two shots out that differed, leaving her a ditch to turn on plus the exact warp threads to sew into on the back.

PattyAnne (not verified)

Wow!!

Thanks for these tips!!!  I love the idea of using the adhesive spray and I really didn't know about using the different grist yarn!!