WELCOME..........YOU ARE IN THE BACKSTRAP WEAVING GROUP.

Some members told me that they would be free to take part in a beginner project weave-along once their little ones were back at school.
I am thinkng about reviving the beginner weave-along proposal and starting from scratch-from the VERY BEGINNING-with step-by-step photos starting with loom parts,yarn talk and warping.
Also we have had some new members join up since the initial weave-alongs and it would be nice to have a group start this off together.
Here is the link to the original weave-along page.................
www.weavolution.com/node/4610
 
If you think you may be free to join in in a few weeks let me know here or by PM.
Laverne
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------


WE WILL BE DOING THE STRIPE VARIATIONS AS IN THE FIRST WEAVE ALONG AS WELL AS A  NEW PROPOSAL -WARP FLOAT PATTERNS..........

 

          

 

    

Comments

Virag (not verified)

I'll be happy to follow along.  I'm quite sure I'll learn even more.  I have had my dh cut the long parts off of metal coat hangers to emulate the knitting needles.  I'm hoping they'll be strong enough to use well.

bolivian warmi

Great. That makes four so far......

Linda Hurt

jenny heard

BWknits

Virag

UPDATED SEP 15TH TO INCLUDE.......................

Anne Crowley

eglantine

UPDATED SEP 17TH TO INCLUDE.................

sharonl

UPDATED SEP18TH TO INCLUDE..................

weave2

jenadina

UPDATED SEP 20TH TO INCLUDE....................

davasdu

UPDATED SEP 23RD TO INCLUDE...................

terryech

UPATED SEP 24TH TO INCLUDE......................

marywareodc

UPDATED SEP 26TH TO INCLUDE.................

LoomMonkey

Anne Crowley (not verified)

Ok, I'm excited!

I have been seeking a project like this and today especially I am frustrated with the house, garden and all things mundane.  It's time to putter in the shop and build a new loom !  I can smell the cedar and walnut wood now... yummmm

Consider me in!  It may take a few to find all the details, but I am stubborn!

Thanks for the opportunity!

(P.S. I am trying to learn how to pm in here, so if 'someone' gets a strange message it's probably me...Laverne, hehe)

bolivian warmi

Hi Anne,

Welcome to the weave-along group. This afternoon I will be posting some photos and information about loom parts so you can start getting ready. Stubborness and tenacity are assets!

Laverne

bolivian warmi

As shown above, you will need-

3 lengths of dowels, the pieces pictured above are, in fact, cut down broom handles. These will form the two loom bars and a roll-up stick.

2 thin dowels-I bought a pack of 25 of these sticks at a dollar store. These will be used as the cross sticks in your warp and, later, as a heddle stick and shed stick.

a flat stick with a bevelled edge. This is the sword and beater.

POSSIBLE ALTERNATIVES....................

You may have some of these things about the house or in the garden shed. The loom bars can be thinner-don't go thinner than 1/2''. You can use pencils for cross sticks, heddle sticks and shed stick and a ruler (without a metal edge!) makes a good beater.

SHUTTLES..........

Wooden or cardboard. Here in Bolivia the weavers just wrap the yarn around a stick.

Some stick shuttles above. Bottom...from Guatemala-a bamboo stake with grooves cut in the ends. Top.....in Bolivia-any stick with the yarn wrapped around-they really load up the stick so it is completely covered with yarn and really thick.

THE BACKSTRAP...............

OK we don't all have one of these. Any sash or strap that can go around your hips and attach to the loom as shown will do. A pillow slip makes a nice improvised strap....

 

PLEASE DON'T ''REPLY'' TO THIS POST.

IF YOU WANT TO WRITE OR ASK SOMETHING, USE THE ''POST NEW REPLY'' OPTION BELOW-THIS LEAVES ME THE OPTION TO COME BACK AND EDIT THIS LATER.....THANKS!

YARN RECOMMENDATIONS COMING SOON......................

 

bwknits (not verified)

Received my much anticipated ebay win of "backstrap loom'.  It consists of two 12" dowels,

some web belting and an 8" wide heddle that has "eye" that might accomodate size 10

crochet thread, but not much larger. :(

Fortunately, I took an inkle class this past spring from a wonderful teacher (and have a Schacht

inkle) and I have taken an extended (8 hrs over 4 Saturdays) rigid heddle class this summer (and

have a 24" Leclerc Bergere) so I have learned enough about weaving to be able to improvise some.

I will run down to our local Lowe's Home Improvement Center this Saturday for dowels;  have a couple

of inkle bands to use as loops;  florist wires to hold the warp for lashing to rods;  and chop sticks for

crosses and heddle sticks.

Looking forward to this,

Beverly in GA

bolivian warmi

Hi Beverly,

Those 12'' dowels will be fine. I have some rods that I bought in a set in Guatemala last year that are 12'' long-personally I prefer them longer but they will work if you want to use those.

All my photos on the beginner weave-along page were taken with thick thread just for clarity-that's my demo yarn. I am not suggesting that everyone use such thick cotton thread. I usually use 8/2 crochet cotton-something a bit thicker than that would be good for a starter project.

The weave-along proposal is for a warp-faced weave so we wil be using continuous string heddles rather than a rigid heddle.

More information on yarn later.............

Laverne

eglantine (not verified)

Hi

It looks like I'll have time for weaving (Yea!)  I have found dowels for the loom but no wooden ruler or other substitute for the sword/beater.  Would a plastic ruler do?  I don't think of plastic as being quite as strong as wood.

 

Caroline (not verified)

I've used plastic before now with no problems.

Anne Crowley (not verified)

Wow! Score!

I am having so much fun collecting the pieces for my new backstrap loom!  I couldn't find a scrap to make the beater and shuttle so I went hunting.  I found a wood shop/lumber place right here in town that has such beautiful woods... oaks, beech, poplar, cherry black walnut, gasp Everything!  I went in and explained that I was making a loom and they turned me loose in the entire warehouse to wander!

I found a gorgeous piece of birch 1/2"x3"x8' , the guy gave it to me for $10 and then handed me several lengths of other wood, cedar, cherry and I can't remember what all else!  I am going to go beaver and have such fun making shuttles and lots of other wood burned, carved ... I don't even know what all yet!  I also got a perfect piece of red oak to make the beater and shuttle for this loom...

Hmmmm, now I have to learn to warp this one... I am having so much fun!  Thank you all for being here and making this a wonderful playground for me!

bolivian warmi

Glad that you are having such a good time, Anne and hope you will show us pictures of your crafted shuttles. I don't actually own a small shuttle after all these years and wind butterflies-which usually end up in a horrid tangle or use cardboard cut out shuttles.

I am hoping to get to work making some shuttles too and hope I can find a friendly wood shop.

 

bolivian warmi

This is a tough one for me as I use yarns that are available here in Bolivia-usually cotton from Brazil, so can't give you specifics as to brand names and the like.

COTTON, WOOL OR ACRYLIC ARE ALL GREAT.

Note that if you choose to use store-bought ACRYLIC or WOOL, you will probably need to respin it.

It needs to be spun firmly to withstand the abrasion and tension. It needs to be spun enough so that it kinks back on itself when it is not under tension.

As we are doing a warp-faced weave and using continuous string heddles, there is a fair amount of abrasion on the warps. A certain amount of pilling is normal but shouldn't be excessive.

If you choose to use COTTON, I would suggest buying a firmly spun crochet cotton-nothing fluffy! Get MERCERIZED if possible.

I generally use a mercerized  8/2 crochet cotton but I feel this is too fine for a beginner project-my 8/2 is about 35wpi. Go for something a little heavier than this. The other extreme is the cotton with which I demonstrate-this is 13wpi and is good if you want to make a belt, guitar strap or bag strap-something thick and firm but it is too chunky for most things.

So I would advise you to go for something between those two weights-just make sure it is FIRMLY SPUN.

On the left-my thick demo cotton and the finer 8/2 on the right.

You will probably want three colors-this, of course, is up to you. Take a look at the striped options here.............

www.weavolution.com/node/4610

The options shown are a litle monotonous color-wise as this yarn only comes in 5 colors here-one of which just doesn't go with the others!

These simple projects will give you a chance to get familiar with the workings of the loom-changing tension with your body to open the sheds smoothly so you don't abrade the warps too much, producing nice even selvedges-one of the hardest things, rolling up as you progress etc................

Bonnie Datta (not verified)

I have used a meat cleaver -- make it dull, or use the dull side and be careful.  Sometimes you find an old one in a flea market or yard sale.

Kudos to Laverne for all the time she takes to share her knowledge.  Sorry I can't do the weave-along this time but love reading the posts.

Bonnie.

 

Sharonl (not verified)

I've been returning to this page constantly. Is it too late for me to join? I know I said I didn't have time but what the heck, who needs sleep.

I'm going to try to source most of my products from local Op Shops (Thrift Stores) and recycled building suppliers etc. Any excuse to troll an op shop is a good one, such a great source of everything and anything.

Laverne did you braid and lace the backstrap yourself? Its a great design. What is it made from? I braid and lace rugs so I'm going to have to give that ago, its a much better and I suspect far more comfortable backstrap than the webbed canvas belt I've been using.

You''ve shown pics of different sheddles, is it possible to show a pic of the way Bolivians use a stick as a sheddle?

And finally, I'm in love with the rug underneath all the weaving tools, its beautiful. Did you make that yourself?

 

Sharon

 

Hmmm a sheddle? thats what I get for typing something at 6am lol. I meant shuttles obviously.

 

 

francorios (not verified)

Laverne,

When are you going to tell us about the rug the parts are sitting on?

Have a good day!

bolivian warmi

Of course, Sharon you are very welcome to join. I'll get you that picture of the stick shuttle shortly and add it above. (the sticks pictured there are about 35cm long). You can see one in use in Peru here.............a Youtube video found by Caroline...

tiny.cc/hlNue

That backstrap was made for me in Peru in 1997-it's made from some kind of straw and I love it- my cat has had a few chews on it and I have had to go fixing it up over the years. I made a rag rug style one with braided strips of fabric some time ago...............

Below is the braided fiber one from Peru and above my rag rug one-nice and broad, supportive and comfortable and the best part is my cat is not the least bit interested in it!

The rug that you mentioned in the photos is crocheted ''cabuya'' fiber from Ecuador-the fiber is a kind of agave and all the colors are from natural plant dyes. I bought it in a coop and stayed with a family that works with this fiber for a week. They took me through the whole process. I bought a tote bag too made from this fiber and when I found that I wasn't using it here at home, I unravelled it and crocheted a round rug to match the one above-mine isn't anywhere near as pretty though.

I tried weaving with this fiber too-HORRID stuff to weave with but I managed to make a tool bag with pick up patterns.

Virag (not verified)

Laverne, could you post the dimensions of your backstrap to serve as a guide?  Thanks:>.

bolivian warmi

The straw one's cradle is 18''x6''. The ''ties'' extend out another 12'' from each end. The length of the cradle will depend on the size of the person-you can see how it is supposed to sit on the body in the photo.

Some woven ones........................

weave2 (not verified)

Hi Laverne,

I'd love to join, but I may be a little late becaue I'm going to have to go on a scavenger hunt for my loom parts.

weave2 (not verified)

Hi Laverne,

I'd love to join, but I may be a little late becaue I'm going to have to go on a scavenger hunt for my loom parts.

bolivian warmi

Hi and welcome! We are taking it very easy here so everyone can get their things together-so don't worry-you can join in.

We are still talking about loom parts and yarn and will start looking-only looking!-at warping on the weekend. Some people only have weekends to do this so I put up some info bit by bit and give everyone time to absorb it and ask questions before moving on.

Go on your scavenger hunt and good luck! I don't expect we will be ready to weave for some time yet. :-)

Laverne

jenadina (not verified)

Can I still join up? I've tried backstrap weaving in the past, but it's been a while!

bolivian warmi

Of course you can. Welcome! Have a look around and let us know if you have any questions. I'll add you to the list.

Tell us a little about your backstrap weaving too. :-)

Laverne

Virag (not verified)

Those are quite lovely:>.

Anne Crowley (not verified)

A Practical Question?

I'm in the mode to get started... I can't help it, I am finishing up a couple of commissions for trim weaves on my Inkle (30+yards of trim for our SCA Royal Coronation) and dearly want to do something in another format.  The last two weeks have been speed weaving the same pattern over and over and I am seeing green dots before my eyes!

I am watching the tutorial like a hawk and even my fiancee could build a backstrap loom now from how much I have talked about it, grin.

The practical question... what are practical dimensions of working on a back strap loom?  I have heard many- like fabric 22" wide and many feet long? I have also noticed what seems here to be narrow weaves only inches to a few feet long?  Bear in mind that I work Inkle and am used to doing 2" wide by 14 ' long in about 5 hours, so I tend to want to make a huge long set up on the backstrap loom. 

My brain is on overtime excited and I know I need to scale back to practical... what is a good average to work?  Thanks so much for all the learning and help I find here.

p.s. I seem to be missing how to put decent sized pictures either on my page or in my forum messages... can anyone point me to a link?

Anne

bolivian warmi

Hi Anne,

First the HELP link for photos..............

www.weavolution.com/node/1328

As for length and width.........these are probably the widest I have ever seen..........

      

Width is pretty much limited to how far you can stretch to pass the shuttle through the shed.

No real limitations on length. You can roll up the warp around the  far end loom bar. Some pictures on my Flikr page for this..........

www.flickr.com/photos/39560980@N05/sets/72157621714345915/

I don't usually roll up things up at the far end-i just sit way across the other side of the room!

I wouldn't go crazy with a first project though :-) Maybe try 6'' wide because you have had so much experience with small band weaving. The widest piece I have ever done is only 12''.

 

 

 

 

 

bolivian warmi

WARPING.................Bear with me....I am still working on getting video up on Flikr for this. In the meantime there are diagrams on the WAL ONE PAGE.............

www.weavolution.com/node/4610

 

Just a summary of what is planned for beginners.........

           

                             (1)                                                                  (2)                                                                        (3)

Option 1-vertical stripes (not with the pick up pattern in the middle)

Option 2-horizontal bars

Option 3-combs

                                                                          (4)

Option 4-you can put options 1,2 and 3 together in one piece as esmecat did on the first weave along.This is the piece that she made.

OPTION 5-THIS ONE IS NEW...............WEAVE A BAND WITH HORIZONAL STRIPES AND MAKE A WARP FLOAT PATTERN .

     

We will learn to weave single triangles on a narrow band. You can see that the more complex design on the left is just a lot of triangles all put together.  The bird and flower motifs on the right are made with the same technique and are designs from Ecuador.

Some more examples of this warp float technique in different colors.................

                   

                                   These woven in 8/2 crochet cotton                                           This one in 13wpi cotton/

i played around today adapting Mapuche designs woven in supplementary warp to the warp float patterning..............SEE BELOW.

 


 

 

Anne Crowley (not verified)

Thanks for the tips!  To use the new knowledge gained I hope th8is photo comes through, it is a bag I made a long time ago, but is an example:

bolivian warmi

Very nice idea for using a narrow band with horizontal bars! Clever how you placed the button.Thanks Anne.

Some other examples of ways to arrange warp stripes and horizontal bars.

francorios (not verified)

Laverne, I like this picture of the poncho weaver, but I'm confused by how the warp goes out over the far loom bar and seems to come back to the near loom bar. What am I missing here? I'm not seeing some thing here.

Can you provide some more detail?

Have a good day!

bolivian warmi

This poncho weaver is working on a circular warp rather than a straight warp like the lady in the other photo. A circular warp is wound like this....................

The piece he is weaving will be twice the length you see in the photo when he finishes and takes out the ''dovetail'' stick (or cord). He has the end near him rolled and clamped so that the warp won't shift  and slide about the loom bars when he beats in the weft. He is just about to finish the piece in this photo and is weaving in the last rows of weft on his 4-selvedge poncho.

This is something that Anne could do as she was asking on the other page about warping up a very long piece.

 

 

Sharonl (not verified)

Ohhhh my happy lil weaver heart. First thing I 'm going to do is get a folder so I can print and keep all the notes from this weavealong. I soo looking forward to trying all the weaving options.

Is everyone having fun scrounging/collecting their bits and pieces for their loom? I've been eyeing off a particularly beautiful piece of ebony that himself has had for 5 years, its never been used, seems a darned shame to just leave it there lol.

 

Sharon

bolivian warmi

yes!! we must invite everyone to show off their loom parts when they are all done just before we actually launch into the weaving. Ebony...ooh how luxurious.

francorios (not verified)

Okay, so the weaver warps up by going around the four basic stakes but dovetails the warp on a FIFTH stick that holds BOTH selvedges? Seems like the warp would get very crowded on that one stick. I did something similar by wrapping my warp over an under a frame loom but I still had separate sticks for the ends.

I could use this weavers trick for sure. I would use separate sticks for the ends but tie them together. I like that!

I am really impressed with depth of color in the stripes. I assume because the weaving is more warp dominant that the stripes are deeper color than with the balanced weave I normally do.

Thank you for sharing that picture and the info.

I'm adding "poncho" to my list of things to weave.

Have a good day!

davasdu (not verified)

can i join? i have most of the big loom, the little belt loom is still uncut though. are we making bands? or something slightly bigger?

bolivian warmi

Yes! Welcome. I am adding your name to the list.

You can make any width you want, Jess, although I recommend something around 3inches/8cm if you are an absolute beginner. Make a short warp first just to get the hang of it and this will also help you see how your yarn behaves-then you will know how many warps you need to wind to achieve a certain width.

From there you can decide what you would like to make-a small purse or shoulder bag, bookmark, belt, tool bag etc....

 

bolivian warmi

The videos are finally up on my Flikr page.

For never evers......there are short videos showing-- how to tie on and wind a figure-of-eight warp

                                                                                           --how to tie on a new color and continue warping.

These instructions will help you wind a warp with simple warp stripes (weave along option 1)

 

For those wishing to warp for options 2 and 3-the horizontal bars and combs, you can follow the instructions on the first weave along page here.................... www.weavolution.com/node/4610    You wind the warp on your warping board and then, once on the loom, you need to separate out the two colors to make the bars and combs.

If you would like to learn a trick which will eliminate the need to separate the colors on the loom after you have warped, take a look at the video and photos for warping with 4 stakes on my Flikr page here...............

www.flickr.com/photos/39560980@N05/3938364050/in/set-72157622418517902/ THIS IS A VERY TIME-SAVING METHOD!! Your warp will look like this on the board......

 

For those of you who don't have a warping board, flat stakes can be clamped VERY FIRMLY to a board-best NOT to use your good table for this!! Make sure the stakes are straight and can't move.

Any other suggestions for improvised warping boards are very welcome.

Laverne

 

 

 

 

 

 

Anne Crowley (not verified)

I'm naughty

I decided to get smart and warp up using my wee little skills... OK... everyone listen to Laverne! Start small, use non sticky simple yarns... I'm so laughing at myself... I used my fuzziest yarn and learned a few new cuss words. 

So, in the spirit of eating crow I set up a tiny backstrap loom using chopsticks... it's adorable!  And I used simple cotton yarn... much much better.  I hope to have a picture up tomorrow.

Thank you again for your wisdom Laverne!

bolivian warmi

Have posted pictures of more warp float examples back on page 1.

Lace Weaver (not verified)

I'd like to participate in the beginner weave along. I was very interested in the recent article on WeaveZine. And I'd like to know more about the pebble weave technique.  That is quite attractive. 

bolivian warmi

Hi there. You are very welcome to join in the beginner weave along. We are just getting acquainted with the loom in this weave along-putting into practice the points covered in the WeaveZine article-learning to open the sheds smoothly and keep the edges straight. We will be weaving pieces with variations of stripes and horizontal bars and I will be giving instructions for a warp float pattern as well.

We ran an intermediate level weave along a while ago where we did double weave  bands-there is an example of double weave at the end of the WeaveZine article-the wide band with the bird motif. You will find the instructions for that here...........

www.weavolution.com/node/4611

We won't be doing pebble weave for the time being. It requires two sets of heddles and is a more complicated pick up.

Adele Cahlander's book-''The Art of Bolivian Highland Weaving'' has instructions for pebble weave if you would like to learn it in the meantime. 

I am glad you found the article interesting.

Laverne

bolivian warmi

Here are the Mapuche designs adapted to the warp float technique.....................

      

f you would like to use this technique for your beginner weave along project, warp up for the horizontal stripes option.

I have many more designs. Step-by-step photos for the pick up are coming along with pattern charts. I will be photographing using my thick 13wpi cotton (used in the black and red example above) for clarity. These two latest examples are woven with 8/2 crochet cotton.

Laverne

 

THE INSTRUCTIONS FOR THE WARP FLOAT PATTERNING ARE ON THIS PAGE...............

www.weavolution.com/node/5347

jenadina (not verified)

If it's a narrow warp, you can also chain your warp and put your far loom bar through the loop. I have *very* limited space, so this is how I manage :) I forgot to measure my current warp, but I think it's probably about 3 yards long. I weave on my bed with my far loom bar attached to the bars on my window (Laverne, does everyone in Bolivia have rejas on the windows like they do here in Mexico?)

 

Jen

jenadina (not verified)

I made the PVC warping board from the directions in Handwoven March/April 2008. It worked well, even though I tend to put a LOT of tension on my yarn when winding.

francorios (not verified)

Laverne,

I am reading Mary Peterson's book on Navajo & Hopi weaving.

Hopi pattern weaving is just like the backstrap pattern weaving you show above. Hopi looms for weaving ceremonial belts were backstrap, but the book shows as a frame loom. They mention that the warp floats in the pattern can make the warp in the center shorter than the warp on the outer plain borders.

They mention inserting a short row, a shot of weft between the border warps, then the next shot is normal.

Is that something to be concerned with?

Have a good day!

bolivian warmi

I have never had a problem with this. The biggest piece I wove was 22'' long by 7'' wide and didn't experience this. The piece was covered in warp floats with only a 4-warp wide border . Have woven several smaller pieces 15'' long by 5'' wide but again with only a narrow 4-warp border and the brown and beige bookmark on page one has an 8-warp border-no problems.

At least if you find it happeneing to you, you will know what to do. I think you mean the Pendleton book? I have that one-will take a look.

Laverne

jenadina (not verified)

On the contrary, Franco...they help you keep your warp spacing! There is a good how-to of this warping technique in Kids' Weaving  by Sarah Swett. She does it on an upright pvc loom, but it transfers to backstrap no problem :)

francorios (not verified)

Yes, Mary Pendleton "Navajo & Hopi Weaving Technique", see Short Rows on page 133 of this edition, if not there Short Rows is in the index in the back.

I found the book at the public library. This one is 1974 edition. I wonder how much better a recent edition would look with current printing technology.

Have a good day!

terryech (not verified)

Hello Everyone,

I am joining the beginner weave-a-long since it has been awhile since I have used my backstrap loom. I have a backstrap loom that I made years ago and have made a couple of belts using the loom. I was using a rigid heddle with the loom rather than string heddles but after Laverne make the string ones and how easy she makes it look I am willing to go totally traditional. I have always had trouble figuring out how to wind a warp that is even. I also was happy to see the alternative ways to secure the end of the the loom to make it more stable ... I always used a single cord to tie to a post and the loom constantly tilted from side to side. So many new things to learn! I am really excited to get started. I will probably be one of the slow ones in the group since I will be on the road at times and have to play catch up when I get home but I intend to get through the entire weave-a-long.

Terry

bolivian warmi

Hi again Terry and welcome. I have added your name to the list. Glad that you have already found some useful stuff here. 

Submitted by bolivian warmi on