For at least a while, the room I put my Swedish loom in will have a shared purpose. So, I am looking for a bit of advice. How dusty is weaving? What type of floor is best? Will it damage a carpeted or wood floor? It is 10 harness and 10 treadle, will weaving on it be physical enough that it should be in a cooler place? I tend to be cold unless I am excercising. Is weaving on this type of loom, countermarche, very noisy?  How much space is ideal around a loom? Anything else I should consider?

Thanks for any advice!

Jo

Comments

MMs-and-OOs-Ha…

I have two looms in my living area but it is just me so why not? I have always had looms in multi-purpose areas. I don't want to take over a bedroom and I don't have studio space. Weaving can be very dusty. Other activities create dust. If you wind bobbins, that throws lint. I have a dust buster handy and I vacuum everyday. I also run an air filter. You and your loom will weave better if you just clean frequently. I have wood floors. My 60" AVL weighs 450lbs. I have it parked on furniture sliders. I can actually push it by myself if I need to move it a bit. I have the same sliders on my 40" AVL. No floor damage. That loom is positioned perpendicular to the 60" and I do slide it back in order to warp it. That's easy. Neither loom walks or moves when I am weaving. You might consider your warping method as part of your space calculation, ie. you want a trapeze, spool-cone rack etc. I don't know if a counter march loom is noisy but if you have wooden heddle frames, nylon tie ups and nylon heddles the noise will be less than all metal, a lot less! What constitutes heat producing excercise on a loom is up to you and your body. It can be a slow meditative activity or you can catch fire. The ideal space around the loom allows you enough room to warp it, room for the flyshuttle boxes if you have them, and your own idea of a comfortable space. I have windows and beautiful views so I never feel cramped.

ReedGuy

Jo, you want to be able to walk all the way around the loom for one thing. Another thing, if your doing real long warps without sectional help, you'll want a full feet in the front of the loom to deal with getting enough tension on the bouts of yarn with weights, trapeze or whatever to tension the warp. Mind you, many overlook the breast beam, cross beam up on the castle of the loom and cloth beam as useful aids in getting even tension on the warp using them in a serpentine fashion. The loom will have some noise from the lamms and treadles moving, the jack up top won't make much noise if any and the beater will make a little thump, but not really noise. Probably the beater is no noiser than a creeky floor when walking on it.

Stay tuned for more 'experienced' help and suggestions than I can give. Everyone comes up with their comfortable ways over time. Even I learn a little more each time I set up to increase efficiency here and there. Sometimes not much, but just a little each time adds up. ;D

You have to cleanup after each weave, no getting out of it. It's just the thing to do. There's fuzzies and sometime bits of yarn you have snipped. I tell ya, a loom is a dust maker, plain and simple.

Within a year, maybe two, I'm taking my loom into a larger weave space. Going into a new house and selling this older place. Moving on, and selling a lot of loot off. I'm liquidating years of gathering. Dishes, furniture, anything not nailed down.  LOL :D

mrdubyah (not verified)

Here's my answers (other opinions may differ).  Weaving can be quite dusty.  The action of the heddles and the beater will generate fuzz from yarns, especially woolen yarns, that will accumulate under the loom.  A broom, vacuum cleaner, or dustbuster, however, can easily keep up with it.  Hard floors are nice, but looms tend to slide around on them and they can magnify the rhythmic thumping of the beater.  Some people prefer to put down a carpet to prevent (or minimize) slipping and to deaden sound.  if you're weaving with vigor, you'll warm up fast. Start with a sweater or sweatshirt on but you'll probably want to shed the outer layer quickly.  With a countermarche, the noise is mostly in the beater, although the spinning bobbin in some boat shuttles can also be suprisingly noisy.  You need enough space around your loom to walk all the way around it and you'll need more in the front and the back for sitting and for warping.  Despite all this, dedicated weavers don't hesitate to put their looms smack in the middle of the living room and devil take the hindmost!  drw

ReedGuy

LOL....like that last line mrdubyah heard it many times from my mother over the years. Haha Now I have 3 bedrooms with "stuff" and no occupants, so the loom is some of the "stuff". :D

Submitted by Jo Raymond on