I am trying to determine what type of loom I have.   It looks like a countermarch but for the fact there's only one set of lamms.  The shafts only rise, like a jack loom.  There are no manufacturer marks.  It has 8 shafts and 12 treadles.  Any ideas?

Comments

SallyE (not verified)

Can you post a picture?

 

JacRoyce

If the heddles get pushed up from below, it's a jack loom.

SallyE (not verified)

On a Macomber, you push on a treddle which pulls a lam down, which pulls an end of a jack down, which pulls the other end of the jack and the shafts up.   I think the statement "If the heddles (shafts) get pushed up from below, it's a jack loom," is true in general, but it is not how all jack looms work.

Still, this does sound like a jack loom from the limited information.

 

vmhughes

Sounds like this might be a Macomber knock off?  There are upper jacks that are pulled down from the center, which raises the shafts, like a jack.  But since they are not pushed up, is it still a jack or some kind of hybrid?

 

Joanne Hall

It is not uncommon to have jacks above the shafts on a jack loom.  Not only does Macomber make them, but also Leclerc and I had a neighbor a long time ago who made looms this way. 

I don't think that there is a hybrid.  It is either a rising shed jack loom or it is countermarch.  The countermarch requires two lamms for each shaft and a cord on each treadle for each shaft.

Joanne

sandra.eberhar…

I agree with Joanne.  The way that the shed is formed is what makes it a jack loom, which I believe you have.  If the shed is formed by moving half of the threads to make the shed it's a jack loom.  Most move threads up to make the shed, but Louet has a sinking shed jack loom.  Some jack looms have jacks under  the shafts, some over the shafts, some raise the shafts with pulleys and cords, but they all leave half the threads motionless and move the other half.

vmhughes

Thanks for the input.  I tried to post pix was unable to do it from my tablet.  Not that it really matters one way or the other as far as making a nice piece of fabric. I really like this loom and was trying to find out more about it.

Submitted by vmhughes on