I've seen this loom offered for sale on eBay and Etsy; and it looks to be something that's being cranked out of a factory currently, even though it's generally pitched with "old", "retro", and "vintage" keywords. It's made (or at least, shipped from) Bulgaria, and seems to run about ninety bucks once you factor in US shipping. Has anyone played with it? It seems unusual for a small loom in that it's a counterbalance with rigid heddles. That intrigues me, and I'm tempted on that ground alone to buy one just to play with.

Bulgarian loom

 

PS: I can post links to places it's for sale, but as I'm new here, and that's generally frowned-on on most of the other hobby forums I participate in, I opted not to. You can find it on eBay by looking for keywords like "bulgaria loom", though.

Comments

sally orgren

The slots (very narrow) and holes (very small) means this is a very limited application loom. It also looks narrow (8" wide?) for such a wide open sett (4 per inch?). And perhaps it is the way the photo is taken, but I don't see how the beams lock into position? (Even the most basic rigid heddle looms have a wingnut to lock the beams front and back when weaving and beating.)

Such an open sett will make unstable fabric, at least woven as shown. I think if you were to take this fabric off the loom, the weft would slide all around on the warp. I would worry knitting yarns would get caught in the narrow slots or small holes if you tried weaving a scarf, and 4 epi wouldn't be tight enough even for a thicker knitting yarn. At best, this would be a kid's loom for a few projects as shown (carpet warp, with scrap knitting yarn or fabric strips for weft), before one would want to upgrade if the weaving bug really bit.

This looks like a loom made by someone who did not really understand loom construction. For instance, if you have a rigid heddle (instead of shafts with heddles), why do you need a reed? (The RH controls the threading and spacing of the warp.) On a shaft loom, the reed not only spaces the warp out, but is used to pack the weft in. This reed is too coarse to be used to pack in the weft, and appears to be in a fixed position. Not sure why it is there, and it would add materials and weight to the cost.

For $100, one of my guildmates scored a used Structo 240/4 loom within the last few weeks. It's 8" wide, 4 shafts (with typically 60 heddles per shaft), a 15 dent reed, and a secure brake system between beams. This loom would have much more potential for both a kid or an adult interested in weaving, and would also have sustained resale value in the case that weaving did not prove to be of interest after a few projects. 

If you decide to go for this loom, please DO post your impressions. I'd be curious. It's one thing to quarterback from afar, another to weave on the actual gear. It is always interesting to see unusual looms and ponder the possibilities.

Thanks for posting!

Submitted by sehrgut on