I have a quick question about warping with silk.
This is my first time working with silk as a warp (having previously worked extensively with cotton and tencel warps) and I really struggled with my silk shedding and joining together during the threading process.
I am working with a combination of 30/2 and 20/2 silk at a 40epi (I am using a 20 end reed, threading 2 per dent). I hand dyed the silk and warped back to front off of lease sticks. During the threading process the individual warp threads joined (it looks like the threads were pilling and joining with the neighboring threads- sometimes upwards of 5 threads would join together). Often the threads could not be simply pulled apart and in fact needed to be cut loose from shedding fibers joining them. I managed to get the warp on the loom and have started weaving but I've found that the silk threads continue to shed and form these lint balls on the individual threads. I'm worried about this affecting the strength of the silk fibers and causing knots and breakage or being further abraded by the wire heddles/metal reed
I have read on these forums about potentially sizing the silk and addings starch- would that help avoid this situation from occuring in the future? Or could this be a result of my dye process affecting the fibers? I used a MX fiber reactive dye with soda ash as an activator.
If anyone has some suggestions for avoiding this tangling issue in the future I'd very much appreciate it! Thanks so much for all your help!
Comments