I am planning one of the projects in Custom Woven Interiors by Kelly Marshall.  I have a chair that needs upholstering badly, and I want some extra material for cushions.  She setts upholstery material at the same sett as the rugs in the book, 48 epi for 5/2 pearle cotton.  I think this may make fabric that is very rigid and hard to work with and I am recalculating to a sett of 30 epi.  I have never worked with warp rep before.  Does a sett of 30 epi sound like it would make a sturdy fabric for cushions and upholstery?  I do intend to sample, but if I'm off wildly, I won't have wide enough fabric.  If I use the 48 epi, it will take a lot more yarn, and if I have to reduce the sett, it won't fit on this loom.

Comments

Joanne Hall

You are right, it would be too rigid for upholstery.  To make fabric more appropriate for upholstery, just use a finer thread.  I would use 16/2 cotton doubled. That will make the fabric thinner and less stiff.  And, don't use a very thick weft.  The 16/2 doubled would be fine.  If you want a thick and a thin weft for making the ribs, try a single 16/2 alternated with three or four together.

Joanne

sandra.eberhar…

Great idea!  I can use the proportions and ends set up in the book instead of my recalculations!  Thanks.  I have worked with very stiff upholstry fabric and it's not fun.

caloosa (not verified)

Thinner weft might make the fabric more supple as well. 

About changing things so much.  Why not try a narrower and shorter sample at the stated sett.  Kelly has a business and wrote the book - it might be too hard or unusable for your purpose, but you will learn a lot and know the limits of what you like - if it turns out that 30 epi doesn't work for you - what then?  Sometimes a good thought to sampling is best.

ReedGuy

Any upholstery books I have strongly suggests dense cloth, not open and airy cloth. Will require a strong beat and a change in shed for another thump. If it is too light it will wear quicker and ball up (cotton). And avoid pure linen cloth as it does not take to curves and shapes as well as wool or cotton. And cotton stains easy compared to wool. I would incorparate wool and have it be dominant either warp or weft faced. I am beginning to do some sampling in this area (upholstery) myself for an arm chair build.

Submitted by sandra.eberhar… on