So, my mom just gave me 2 lbs of handspun singles from my grandmother's sheep. Wow. Beautiful, shades of grey and not really 'next to the skin' quality. I want to make a blanket, and am contemplating a scarf first to work the kinks out of the design. I'm thinking of something open, and somewhat lacey for the weave structure-- perhaps Atwater Bronson.. but maybe something else. Any suggestions? Projects to point me towards?  Warnings?  thanks.. marie

Comments

mrdubyah (not verified)

Try using the handspun in a twill but leave a little space between weft threads.  Just think of the beater as "positioning" the weft rather than "beating" it.  The wool scales will lock the fiber into place and you will get a very open lacy fabric. 

ingamarie

I might just try that. Itching (as it were) to try Atwater-Bronson, but I have enough yarn here to do a lot of sampling.

marie

lkautio (not verified)

Sure, try the Atwater-Bronson Lace. It's fun to play with.  If the yarn is thick, use 4 thread blocks rather than the typical 6 thread blocks (1312 instead of 131312). Sett it really open and full a bit to keep it in place.  Another good open lace option is leno which can be sett very widely.

If it feels too scratchy for a scarf, you could always make your sample into a pillow cover or tea cozy.

Laurie Autio

Barbara Keyser (not verified)

I have used several specialty yarns as weft and found that twill and twill vairations work best to showcase the weft yarn and yet result in a good stable woven cloth.  Mr Dubyah's point about not over beating is also important, as beaten too firmly and the weft disappears from the cloth.  Good luck

ingamarie

Yes, the beat it important. These are hardly specialty yarns, but we will see how they weave up!  thanks.. marie

Liese (not verified)

since your wool is handspun singles the first thought that comes to me is residual energy.  If someone has knit something with the same yarn or from earlier yarns it would be interesting to note how much bias occured - that might tell you how much migration might happen in the wet finishing.  If I were doing this I'd do a sample in plain weave first because  something very interesting might happen.  Waffle also came to mind but that might use up your materials too fast.

ingamarie

Interesting point-- this yarn was spun about 15 years ago so it's probably settled a bit.. also from my work with collapse weave I'm thinking it's probably too thick to move much -- but you've piqued my curiosity!  I'm an avid sampler and will definitely make a plain weave sample too.

Bonnie Inouye (not verified)

I like to use handspun yarn as the pattern weft in overshot because this places the handspun yarn in the spotlight. Overshot makes a plain weave cloth with a decorative weft float that sits on top of the plainweave ground. If you are interested, I would use a finer, softer yarn for warp and for tabby weft, with a sett appropriate for balanced plain weave with the warp yarn. A simple design can draw more attention to the pattern weft.

vaweaver (not verified)

i am interested in learning network drafting.  i have a piece of music that was commissioned for my 60th birthday which i would like to convert to cloth.  i think network drafting would be useful but i don't know much about it.  can anyone point me in the right direction?  which resources should i be consulting?

 

many thanks

Bonnie Inouye (not verified)

Vaweaver, I think this should be a new topic, as it has nothing to do with using handspun wool or an open weave. Network drafting is quite powerful! There are articles in weaving magazines, chapters in books, and a book by Alice Schlein. Tell us what kind of loom(s) you use. Do you have weaving software? Are you already creating your own drafts? I teach a couple of workshops on network drafting and generally I start with twills. The concept and methods work with lots of weave structures.

Regarding music and weaving, there are some articles in the current issue of Complex Weavers Journal.

Bonnie

vaweaver (not verified)

bonnie,

apologies for posting this in the wrong place.  i'm a little new to posting on this site.  i have an 8 harness avl home loom.  i use pixeloom for drafting--unfortunately it is the mac version and the block substitution isn't working yet (they are working on a fix).  which book do you recommend i start with and when and where are you teaching your next class in network drafting? 

many thanks

vaweaver

Liese (not verified)

Inga, I think you're right that after 15 years the energy probably has dissipated! Looking forward to seeing what you come up with,

Liese

ingamarie

Vaweaver-- I use the block substitution on a Mac and it's fine. There's a Network drafting function though which I haven't used.  Bonnie gives great advice!

marie

 

 

vaweaver (not verified)

great advice.  many thanks.  will look into it.

 

laurafry

I expect that any twist energy has not gone anywhere - it's just 'asleep', ready to be activated as soon as it gets wet.

I have yarns with twist energy that I've had for years and the twist is still there.  :)

cheers,

Laura

Liese (not verified)

So the energy doesn't dissipate ...Now I've noticed that  many people  used to suggest wet finishing their yarns by blocking - either on a drum or by hanging with weights.  What is your experience with wool yarns treated that way but used years later, asleep but energized again once wet out? It occurs to me that commercial wools coned up might also be held  "in suspension".

Liese

laurafry

It's hard to say - it would depend on whether or not the yarns have been wet finished and how 'energetically'.  The only way to know for sure is to make a sample and experiment with the yarn....

cheers,

Laura

Bonnie Inouye (not verified)

You might start with my WeaveZine article because it is free.

http://www.weavezine.com/content/flowing-curves-network-drafted-twill

An 8-shaft loom with 10 treadles is fine for network drafted twill. I do not use block substitution for network drafting, but I do use weaving software tools for network drafting. These work differently (or have different options) in each program I have seen, but the goal is always the same.

Here's the difference between block sub and network drafting:

Block substitution takes your design and interprets each square (pixel) as a square to be woven. For example, you could start with a 2-block design as your profile and get an 8-shaft draft with two blocks of twill, one on shafts 1-2-3-4 and the second on shafts 5-6-7-8. This is seen in the current issue of Handwoven. A 2-block profile with a 12-square wide threading will become an 8-shaft twill with 48 warp ends. This is nice if you like squares and rectangles with neat edges.

If you want more freedom with shapes including diagonals and curves and if you do not require neat edges (or if you like shading) then you can start with a design using all of your shafts and a freehand draw tool. If you want the threading to repeat, use a total number evenly divisible by 4 because the number of warp ends will stay the same. This lets you make the design at exactly the scale you wish.

Network drafting is a method for expressing the design you want in the consistent interlacement of your choice. Consistent means that you control the float length throughout the piece. With 8 shafts, a 4-shaft twill is a reasonable choice for the consistent interlacement.

Hope this helps.

Bonnie

 

vaweaver (not verified)

bonnie,

you are so great to share so much.  many thanks.

 

Submitted by ingamarie on