Hi
I am a beginning weaver and have been warping my 4 shaft CB loom with 8/4 cotton carpet warp. I am warping from front to back and have sleyed the read and threaded the heddles and tied the warp onto the warp beam. I was delayed for several weeks from tying onto the cloth beam because of some issues that came up and also had to move the loom. In the process, the warp had come unchained and is tangled and almost looks like Charlie Brown’s kite string. How can I get it untangled so I can tie it onto the cloth beam and start my weaving?
Thanks and GOD bless you

Candace

Comments

r1mein54 (not verified)

My only recommendation from personal experience is NEVER pull any part of it tight. Tangles I encounter I start unknotting and unweaving at the end of the bunch gradually working forward. On occasion I have "a loose one" that I can pull out from the group and will do that to reduce one yarn that could still get retangled.

r1mein54 (not verified)

correction - unbraiding, not unweaving. Weaving is what we are trying to do. :)

Sara von Tresckow

Chained warps also need choke ties every half yard or every yard to keep them from tangling. You remove those ties as the warp is beamed.

Also, warping from the back by winding that warp on the warp beam with tension will secure your warp and keep it from becoming tangled, especially if you do not complete the process on the same day.

celtinbirks

thanks for your help, I got it untangled and am now weaving

Margery (not verified)

I remember a similar experience with my first warp. It was a hot summer evening. I spent most of the night on the porch warping my new loom. Warping became much easier with practice.
Submitted by celtinbirks on