For the last 4 warps I have tried winding, i have ended up with a spaghetti mess. I had to make my plain beam JLHammett 4h6t loom into a sectional using 4 equal lengths of "boards" with nails set an inch apart. I lost 2 threads in one of the last bouts and backed up to find them, but as I back up, the other bouts got tangled on the nails and now it is a horrible mess, again! I purchased Karen in the Woods' video of how to sectionally warp. This helped me, but I want to wind a warp perfectly, without backing up, without tangles, with threads still in order, so that I can get to the threading part. Should I be using separators every turn? What would fit in between 2 nails to keep the warp separated? (Like paper on a plain back beam) Maybe a piece of tape after every turn. I use blue painter's tape which is easy to remove. Any ideas out there? thanks...if anyone is in maine, please contact me. thank you...ann~

Comments

laurafry

If you are beaming with sufficient tension, there is no need to have warp separators while sectionally beaming.  You might need to use bicycle tubes or some such to keep the threads going into the proper sections, then you would not have to back up.  I also have 'slides' on my website showing how I beam sectionally.  I've also blogged about beaming an ordinary warp on my sectional beam.  http://laurasloom.blogspot.com

My web site is http://laurafry.com  Click on Education, then Sectional beaming

cheers,

Laura

 

Submitted by Anonymous (not verified) on