I recently went to a Wool Gathering in Yellow Springs, Ohio and tried out a rigid heddle loom.

I've been a self taught knitter for a few years and love that, but I really really like fabrics that have been woven!!

Researching on the internet and with books from the library, I think that I want a rigid heddle loom. Looking at the Ashford 24" that I can buy new for about $170.

I looked into backstrap weaving also, but I think the rigid heddle is the best way to go for now.

 

So...I know the Ashford rigid heddle is a good beginner's loom...but will I be able to figure it out on my own?? Does it come with directions?

I will probably get a book or two to get me started...can anyone recommend any to get started with?

I would like to make table runners, placemats, coasters to start. Useable things!

I  contacted a local weaving guild to ask about becoming a member, but never recieved a reply. So...I could be on my own until I track someone down to help me out!

 

Thanks for any suggestions...I am anxious to start a new hobby!!!

 

 

Comments

francorios (not verified)

Welcome to the group.

Ashford looms come with instructions that should fairly easy to follow. A number of the members here have that loom and you should be able to get answers here for your questions.

There is a "weave along" in progress right now for rigid heddle beginners, so if you want to join in you are welcome to.

Weave along is at this thread http://www.weavolution.com/node/5563

Have a good day!

Franco Rios

Loominaria (not verified)

 Welcome, Mary Beth--

The loom comes with a step-by-step warp-and-weave booklet, and Ashford has instructions for warping without an assistant online at www.ashford.co.nz/helpandadvice/Solo_Warping.pdf

I think the most complete rigid heddle book is still Hands On Rigid Heddle Weaving by Betty Davenport. Others include:

The Ashford Book of Rigid Heddle Weaving (Rowena Hart)

Weaving Made Easy (Liz Gipson)

Creative Weaving (Sarah Howard, Elisabeth Kendrick)

Textures and Patterns for the Rigid Heddle Loom (also by Betty Davenport) -- a little more advanced, showing how to manipulate warps and wefts with pick-up sticks and supplementary yarns.

And there are sources online also.  Handwoven Magazine has some free patterns.  Weavezine is a good spot to browse.  Amelia's Ask the Bellwether blog has a collection of rigid heddle links at therigidheddle.tumblr.com/

And Weavolution, of course.

Kurt

Caroline (not verified)

Hi Beth, Rigid heddle looms are great fun. In the past they were treated like toys, but now weavers are beginning to see the potential here for creating fabulous fabrics.

If you can afford it, try and get the double heddle kit to go with your loom, and the extra matching heddle. You won't use it immediately, but it will be there for when you are ready, which may not be too long!

Weavezine is a fabulous resource, so is Weavolution, and as you have probably already seen and experienced, people here are only too happy to help. Many of us learned to weave in isolation so cannot stand by and not help someone with questions.

Local groups are great, if you have one that is supportive of rigid heddle weaving, but unfortunately some more traditional weavers still will not take you seriously and will try to persuade you to buy a multi-shaft loom instead - or even have one handy to sell (someone else's problem loom!) so stick to your guns if this is the way you want to go. Many weavers love simpler looms and weaving techniques; they are so marvelously portable, and you can weave in front of the TV without hogging all the lounge room space. They are also much faster to warp up ( most weaver's pet hate) and  you can learn many, many different styles and techniques; more are being developed each week as weavers experiment.

So welcome to a fantastic hobby, that can turn into a magnificent obsession!

And rigid heddlers are a great bunch of people!

Mary Beth (not verified)

Thanks so much for all the suggestions and the nice welcome!!

I really think I will try to order the loom this week, but I have to wait and see if my dryer costs alot to fix first! LOL(it stopped heating on Friday)

Always something, right??

I'm still not even sure what a heddle is...much less a double heddle, but thanks for the suggestion! Will look into it!

 

Mary Beth

 

Thumper70 (not verified)

The Ashford is what I've got. Yes, it comes with instructions. And yes it is dead easy to use. If you've got some yarn handy you'll be weaving your first project on the day you get your loom.

claudia (not verified)

I must tell you I have tried them all and the Kromski is the best and has the most to offer.  I actually like the Schacht too but it doesn't have the warping board. 

The Kromski comes with pegs that fit in holes in the back of the loom for winding a warp.  A "warp helper" that is great for getting the warp on the loom, back to front.  A wonderful booklet with instructions for everything including a first project, an instructional video showing how to put the loom together and how to warp it.  I am thrilled with my 25" Kromski and recommend them to everyone when I have a chance.

Claudia

bolivian warmi

Darn! I wish I had bought one of those. I like the sound of those pegs that fit in the back of the loom. Does it come in a larger version?

claudia (not verified)

The Kromski comes in 16, 24 and 32 and has a second heddle kit, a stand and a really nice bag.  I got the stand and the bag for my birthday so I can travel with it. 

I think it's the best one available because there are so many features and the price is lower than the Schacht.  Keeps your eyes open you can occasionally find one used.

Claudia

Loominaria (not verified)

Glimakra's Susanna also has a warping set-up built in, plus lease sticks and beaming sticks, and metal ratchet/pawl. If they had not discontinued the 31-inch width, I would have purchased that one instead of the Ashford 80 cm.  Also an available stand and second heddle kit.  After reading about 2nd and 3rd heddles, I decided a 4-harness loom would be a whole lot simpler.

I'm starting to tire of the folding Ashford Knitter's Loom, because it keeps loosening at the folding point, where it attaches to the stand, and the heddle rests also get loose.  I'll never get another folding RH loom.  Still waiting to see what width(s) the Glimakra Susanna will have in the future.  Oh, I just noticed that Little Susie will be joining the Glimakra looms, and it will fold. Still under development.

Kurt

bolivian warmi

hi Kurt,

would be kind enough to post a picture of this built-in warping set up?

Laverne

 

Loominaria (not verified)

Sorry, I don't have the loom and can't find a photo online. It's in the description on the Glimakra USA website, but they don't show a picture. You can e-mail Joanne Hall at Glimakra and ask if she has a photo of Susanna in warping mode: [email protected]

Kurt

Trying to figure out if other folding looms have bolts or pegs to keep them solidly in the unfolded position

Caroline (not verified)

I have a Knitters Loom, and I love it! I thought at first that the 12 inch would be too small - I do have a second heddle kit for it if I want to get ambitious - but I don't think that will be an issue. I do have a couple of other RH looms. One is home made and a WIP so not in use, and the other is a cheap European one of unknown make. Neither fold, but they do have one problem in common.

The long distance between the RH and the front beam.

I have short arms, so its not just how wide the loom is, but how deep the loom is that can become an issue if you want to manoeuvre a stick shuttle with ease, then change the position of the heddle without doing aerobic exercises. I cannot reach the back beam to wind on either, and this is on an 18 inch loom. I don't think plastic surgery or a diet would make much difference to how far I can stretch, ;-).

I wouldn't normally recommend embracing strange looms in public before you buy them, but the width and depth of the loom could be critical to ease of use and enjoyment, particularly if its clamped onto a stand.

Just another thing to take into account as you take the plunge.

 

 

Thumper70 (not verified)

I'm glad you mentioned the folding RH - I'd wondered if the problem you cite would be thus. The idea of portability is lovely but . . . . not convinced (grin).

Loominaria (not verified)

 I'm getting a Journey Loom for easy portability, and that should, I hope, be a solid frame each time it is assembled.  I may be drilling holes and inserting removable pegs on the Knitter's Loom, as frightening as the thought of me with a power tool is.

Kurt

Erica J

The larges Kromski hapr is 32", I believe the weaving width is actualy 31.5'. I'm anxiously awaiting mine!

Cheers,

Jahanara

PattyAnne (not verified)

I have three rigid heddle looms and I like EACH of them.   :)

I have a 20" Flip, a Cricket, and a Knitters Loom.

To me each loom has its advantages!

I use the direct warping method to warp these looms. Can you please tell me the advantages of winding the warp on the pegs because I have never tried that.

 

 

claudia (not verified)

Hi PattyAnne,

The direct warping method is great with a rigid heddle loom.  I prefer a warping mill or board because you can make longer warps and the accuracy is improved.  A good rh loom can hold up to 15 yards of warp, I think only about 7 on the Cricket and Knitters loom though.  I like longer warps because you only have to measure once and you make tons of variation with your weft.

It's all a matter of personal choice.

Claudia, loving the Kromski Harp 24"

PattyAnne (not verified)

Thanks!

Do you know how many yards the Flip can be warped with?

I guess the length of warp varies  with the type of yarn you're using, right?  You know... bulky vs 8/2?

When companies state how many yards their looms will hold, are they speaking of a certain weight yarn??

Thanks again.

PattyAnne, Loving her 20" Flip, her Cricket and her Knitters Loom all for different reasons.  :)   Hmmmm... wonder if I need to add a Harp? LOL

PS. The Flip comes with the second heddle block in place whereas you have to buy the blocks as an accessory for the Harp?  Am I reading this correctly? Also does the stand for the Harp fit all sizes as does the Schacht stand? 

Just a few questions as I continue to look around at the rigid heddle looms available.

claudia (not verified)

The length of the warp is dependent on the project planned.  One way to learn about this is to go to the Weaving calculator in the Resources section: http://www.weavolution.com/weaving-calculator and fill it out using a specific yarn and a project in mind. It gives you an idea of what you need to plan for projects, if you are a planner and I am. But, the other option is to put on a 7.5 or 8 yard warp and make scarves or table runners or whatever until the warp ends.

I use adding machine tape and measure the length of the project on the tape.  I pin the tape along one edge as I weave so I don't weave the project too long or too short.  For instance, the scarf I am finishing now I wanted to weave for 65" knowing it is 100% wool and I was planning on felling it a little once it is done so there will be some shrinkage.  I want it to be at least 60" before fringe.  I also measured every 5" so I could weave 5" plain weave alternating with 5" of lace pattern.

Hope that helps.  Yes, the second heddle kit is purchased.  I don't know if the stands are specific to the loom size.

Claudia

 

PattyAnne (not verified)

Thanks again!  You've been very helpful.  I will check out the link and also may begin using cash register tape.

Loominaria (not verified)

I believe companies normally figure the average yarn weight that would be used for the heddle dents per inch that comes standard with their loom, plus heavy paper as a warp separator.  An exception might be a loom that comes standard with warp sticks, such as Glimakra Susanna.  As you said though, heavier or lighter yarns and different thicknesses of warp separators can add up on the warp beam.  I get bored with long warps, so I generally don't use them.  I also hate it when I don't like something about a warp and have a long ways to go before it's completely woven.

But most 'normal' weavers do like to get as much mileage (literally) as they can from one warp.

Kurt

Happy with his RH looms that don't fold (Ashford, old Schacht), not so happy with the Knitter's Loom that doesn't hold its angle on the stand and sometimes gets wonky at the heddle blocks -- probably will replace the Knitter's Loom with a Glimakra when new sizes come out.

quejimenez (not verified)

 this is such a wonderful thread...

i'll add my $.02:

i'm extremely new to weaving and working with "fibers" as a whole...unless you count me being a quilter...i had a small stint in crochet and weaving...but never enough interest to finish even a hat...sad i know.

as for weaving...a wonderful, wonderful hobby!

i too have a kromski harp, i have a 32" as i wanted the biggest loom i could find...there were a lot of reasons why i choose to go with the 32" harp. 

1. size vs. price, i found that i could get more for my $$ with the kromski 32" harp at $229 with free shipping...that allowed me to add other stuff like an extra heddle or two (i got an extra 10, and then called back a day later and added a 12") and also more shuttles and pick up sticks.

2. the warping board on the back, this was almost the #1 reason that i choose to go with the harp....again, getting great value for the price. when i called the woolery (wonderful people who gave me much direction) and they informed me that i "may" wanna get a warping board...i went back to the drawing board...thinking about price and what would be easiest to learn...and again all around i found the harp to be the best band for my bucks.

i absolutely love my harp...it came with a dvd that showed how to put it together, and how to begin a first project, along with the written instructions too...

i was literally winding my first warp and weaving the first day or so...it is a wonderful rh loom.

don't worry about learning on your own...there are so many wonderful weavers who are willing to share advice and tips, especially here on weavolution...this is the most friendly and wonderful group....

and lastly all the books mentioned are gems and if you take it slow...read them...and ask questions when you have them..you'll fair well.

i will also add that i found reading the information very confusing (before i actually had the tools in my hands) when i actually had the loom and was working while reading it all made sense and i picked it up faster than i thought. 

above all...have fun, its a wonderful art to pick up...and be prepared for a love affair!

SteveL (not verified)

Positive Lock on Schacht Flip Loom

Kurk,

The Schacht Flip has a "lock knob" in addition to the usual screw tightend pivot at the folding point.  The lock knob screws into both pieces of the loom frame creating a positive lock - when engaged the loom cannot fold.  Coupled with a sturdy frame, and the loom feels pretty solid.

Just one of a couple of reasons I chose the Flip.

Steve

 PS:  The Kromski Harp also appears to have a positive lock at the folding point.

Silverwheelyarn (not verified)

I am a professional weaver who uses an Ashford Rigid Heddle, so you don't have to worry about it limiting you.  I chose Ashford due to it's ability to upgrade.  It not only has lots of reed sizes to play with, but can also add a second heddle.  What this means for you is that when you are ready for more complicated weaves, the Ashford will support your growth.   Have fun, learn, and if you have any questions we're all here for you. 

fantasticfelter (not verified)

 I love the portability of my ashford knitters loom. i have a emilia by glimakra and love the the strong metal cogs and ratchets  and the beefy cloth and warp beams. i use my 20" schacht flip the least but it fine. i think the stand for the ashford regular RH loom  is the best stand,  the knitter loom stand and all the others are not very stable and expensive for what you get..i have the knitters loom, and i prefer the cogs and ratchet, better  than the ones on the reg ashford RH loom, they are thicker and sturdier than the reg ashford rh loom rachets. also the knitters looms comes finished and is assembled already. the loom i use the most in teaching is the glimakra emilia. i love there threading tool, and the great integrity of the materials they use. it does not fold up easily or as gracefully as the knitters loom, but will fit in totes and on tables clamped with out a stand.of all the RH looms i prefer, ashford, glimakra, and schacht. leclerc makes a table top one that is bigger and is good as well. i dislike the harps wood  and the beka's  loom design they are my least favorites  of the RH looms. they are not bad, just my least favorites. i have woven and used and taught on them all and this is my opinion from that perspective. i do not sell nor am i affiliated with any products i have mention here.

claudia (not verified)

Thanks for sharing your opinion on the various RH looms.  It's nice to hear from someone with experience using almost all the RH looms available on the market these days.

We all have our favorites.  You have offered information that I have not seen before.  It's so hard to choose when looking to buy a new loom.  Fortunately, these are more affordable than larger looms and using an RH loom often helps people decide if they enjoy the weaving process.

I was hooked on weaving long before I got my RH loom and may have been looking for different features.  As I said, there are so many alternatives and so much that affects the decision of which loom to purchase.

Have you considered a longer, more detailed review?  Perhaps broken down by feature or manufacturer?  That would be a great separate forum topic for this group. 

Claudia, Weavolution co-founder

Kurt Pippin (not verified)

I think they may have changed the Ashford since you or I got ours. The ratchet/pawl on my Ashford 80cm and Knitter's Loom are the same, except for colour.

Pippin

fantasticfelter (not verified)

humm i went to foxglove, ashfords distributor, to compare the two, and no, they are STILL different! the reg. RH loom has a wood rectangular knob, and a different plastic cog then the  ashford "knitters loom" round plastic knob and thicker cog system.  google it and take a look. they are not the same  but the same beige color now.

deborahb (not verified)

 Mary Beth,

  I am a member of the Miami Valley Weavers Guild (Ohio). I was very disturbed to read that you had not received a reply from our guild. We would love to have you as a member. There are people with different levels of skill and expertise. If you are going to the Wool Gathering in September 2011 please stop by the guild booth and they will be able to sign you up right there. Bonnie Byrnes is our membership [email protected]. She can help you out now with membership.

  There is also a guild in the Tipp City/Troy Ohio area-The Upper Valley Weavers Guild, you can get information about joining that group can from Kay at The Tippecanoe Weaver and Fibers Too, 17 N. Second St., Tipp City OH 45371. Phone#937-667-5358. Tues.-Sat. 1-6 pm.

KatP

Hi Kurt, The Schacht Flip RH loom does have a couple of pegs/bolts that prevent it from folding up unintentionally. I've been very impressed with how beautifully this loom is engineered and built. Cheers, Kat

jenbaum (not verified)

I have looms of plenty - for my rigid heddle weaving I weave on a Schacht Flip or Cricket (I have them both).  I have the stand for the Flip as well and can say that this is a very sturdy loom.  It locks in place and is very stable.  When not in use I fold it up, put it in it's bag.

illoominated (not verified)

I have a 24" Ashford and love it.  I've gotten some extra reeds, and will get a second heddle later on.  The reason I chose the Ashford was because I needed it to have a stand that felt sturdy.  I weave in the family room, and there is not table to lean the loom upon.  I liked the Ashford's stand much better than the Kromski's.  Have fun - it's a great way to get into weaving.

Submitted by Anonymous (not verified) on