I bought a Glimakra band weaving loom at Black Sheep Gathering a couple of weeks ago. They shipped it. I assembled it and began weaving. My first band was a striped tan and kakhi 1/2" in 10/2 cotton. Second band was another simple pattern w/o pick up, 1 1/2" wide. I have run into a pretty serious problem with the loom. This loom has a rachet to hold the piece tight. I do like to have it tight, but I may want it tighter than the loom is designed to go. I'm not sure if I have worn out the aluminum piece in just two bands, or if it is set wrong. The piece that sits in the ratchet is straight up and down and has no purchase on the ratchet. I can't tighten it enough. It will jump clean off the ratchet. I'm calling the Glimakra distributors I purchased from on monday to see if I can replace parts. This is sure disappointing, because the loom works great otherwise. I was able to weave quickly, using a little round shuttle I whittled. That is I was weaving quite quickly before the difficulties began. Darn, I really wanted to start on another band.
Comments