I need some advice. I warped my jack loom for the first time (my first time warping anything other than a rigid heddle or frame loom). It wasn't bad or scary or anything. Everything seemed to be going ok. It's an 8 shaft, but I was only threading 4 shafts for a rug.

I used some wool yarn that I can't identify because I got it from a friend and there was no labels or anything. I thought it would be a good yarn to use for a rug. It is thick though and course (sticky). I had it at 4 epi in a 5 dent reed. I managed to get it through the heddle eyes, but it was tight. I was concerned about this but kept going. I was warping front to back, (using Cay Garret's book). Just trying to get the warp to go through the heddles to tie it onto the back beam was a nightmare. It was really pulling the heddles bad. I couldn't see myself, on a first time project, struggling with this warp so I cut it off. That hurt...really hurt. I wanted to cry. But, it was good practice. Does anyone think I was too hasty? I just didn't feel right about that warp.

Comments

claudia (not verified)

I don't know if you were too hasty but if the yarn didn't move through the heddles you will have a horrible time trying to weave with it.  Sounds like it will make a good weft.  Have you used a McMorran balance and figured out the weight per pound?  You could also try a burn test which would help you determine if it's partly wool or all acrylic.  I know someone posted burn test information.  Go to "Search forums" in the left hand navigation list and try search for it.  I am certain it is in the forums somewhere.

I would consider a perle cotton for your first adventure in warp. It moves through the heddles easily and is very reliable as both warp and weft.  Hope that helps.  What other books to you have?

Claudia

claudia (not verified)

I found a chart and instructions on the burn test here.  Good luck and keep us posted.

Claudia

lkautio (not verified)

I think you made the right decision.  Not all wool yarn is good for rug warp, and not all heddle eyes are good for fat threads.  Consider putting on a 4 ply linen or cotton seine cord warp and using the wool as weft.

Laurie Autio

djfiberarts (not verified)

You ladies are the best! Thank you!

DJ

Submitted by Anonymous (not verified) on