Hi Everyone,

 

I've just joined Weavolution after doing a search to help me find info to heal my slightly battered loom. I found the Care and Maintenance forum (can't remember it's exact name, I'm a newbie!) and was so impressed with the info there I joined up that night. I also bought 5ltr of gum turpentine and 5ltr of Danish oil!

 

A friend undertook to do my recent house move for me as I was not able to do it myself, which was very kind, but he didn't treat my beloved loom with the care that I would have liked him to exercise. Hence the loom has several new dents, chips, scratches and scuffs. I don't want it to be pristine but it is a very special loom and part of our British heritage, in my eyes. It was made especially for Miss Norah Biddulph in about 1933, in Sweden, and imported to England by her. She and Miss Emily Dickinson (not the poet!) formed The Quantock Weavers and lived in a little village in Somerset. The Quantock Weavers were at the forefront of the resurrection of handweaving in Britain in the 1950's, as I understand it, and I believe they went on to be instrumental in, if not the driving force behind, the establishment of the National Association of Guilds of Weavers, Spinners and Dyers in the UK.

 

Some of Miss Biddulph's weaving can be seen in the shape of an altar frontal at Wells Cathedral (I think it's Wells; all my research is still packed away in boxes); I bought the loom from a gentleman and his wife in Somerset who I think bought it upon the sale of Miss Biddulph's effects after her death in the late 1970's. It has its provenance stencilled indelibly upon it, as it had to be labelled with Miss Biddulph's name when it was transported to Somerset by the GWR, the Great Western Railway. So you can see that this loom is a piece, albeit a small and specialised one, of Britain's cultural history, and I think it is very important and valuable.

 

So, my friend has acted as if totally unaware of this; as if he was transporting a large inconveniently-shaped hunk of old pine! My poor loom has sustained some chipping and scratches and dents, quite deep ones, but nothing to affect its assembly or functioning, I don't think. Please would someone be kind enough to advise me on making good the damage? The dear thing needs a good clean and feed anyway, hence the turpentine/Danish oil; if someone tells me what filesize is suitable, could I post some photos of the relevant bits to see what you all think?  (Aha, the info is on the page where I write my posts!)

 

I'm itching to put it back together with much TLC, and to start weaving on it again. Any help on which way forward to take, along with any more information on or queries about the Quantock Weavers, will be gratefully received!

 

Warmest thanks,

 

Katilinum

 

 

Comments

Michael White

Hi Katilinum, Sorry about your loom. My wife is from Norwich (www.handweaver.us) One trick to reduce the dents and scratches is to put a damp cloth on the damage area. The moisture will cause the fibers to swell and maybe reduce the size and depth of the damage. allow to dry completely before trying to finish.  Do you know what type of  finish is on your loom?

You can try 1m or less for your picture, if to big  the program will let you reduce the size. Try a 300ppi for the width.

Michael 

Katilinum (not verified)

Thanks for the reply, Michael, and sorry I've been away so long.  I've got the decorators in and I'm doing a Major, Major clutter removal exercise whilst everything is being moved around.  I don't know what finish is in the loom at the moment; it's satiny, doesn't sit on top of the wood but is part of it (soaked in?) and is a very deep tawny colour.  I was told when I bought it that the loom had been treated for woodworm; doesn't Danish Oil see to woodworm?  I'd say it was an oil finish, but I'm not an expert.

I want to get started on beautifying it straight away, but I have to exert self-control and so my treat for finishing the junk-removal exercise is that when I send the skip away (yes, I've hired a skip, and it's 3/4 full, it was that bad!!), THEN I start on the loom.  Every single room in the house is a work-in-progress at the moment, so it'll be at least 2 weeks before I can start.  But that's not a bad thing, because the weather should be improving (who am I kidding, March in England is ALWAYS wet!) and I can work outside.  I'll no doubt be back as I find questions arising as I work.  Meanwhile, here are some pics.  I was especially saddened by the scratching over the stencilling.  I'll do the damp cloth thing on it.  Thanks, bye for now.

Stencilled area

 

Where the beater hangs:

 

 

Michael White

Looks like they bugged it up good! When you get ready to work on your loom send me an IM (go to top left you will see messages, when that page opens hit new message and type in Michael White, type in your message. On the bottom hit send) If it is in fact an oil finish that is good, because you can do some light sanding. Let me know when you are ready?

Michael

Sara von Tresckow

Xylamon is for the worms - applied directly in the holes and then sealed with wax. 

Katilinum (not verified)

Ah, I thought I might be making a mountain out of a mole-hill, but I did weep with rage and frustration when I saw it.  So I'm glad you think it's bad too, Michael, in a way!  Grrr!

Picture of the loom before the move:

 

Wasn't she beautiful?!

Sara, the woodworm is no longer active, and hasn't been all the time I've had the loom.  I'll keep a close eye on it 'cos I don't know what it might have picked up while it's been away from me.  Do I need to do it again as a preventative measure? I dunno, it's all new to me!

Thank you both for your interest; I'll keep you posted.  And thanks Michael, I'll IM you when the time comes.

Kindest regards,

Katilinum :-) (formal British person!)

 

Sara von Tresckow

When we lived in Germany, any piece we acquired with worm holes was treated by putting worm killer in the existing holes and sealing them up - no need to keep an eye or worry later.

The house we bought has them all over and we had to throw out otherwise usable furniture and have highly toxic sealer put on the one floor that was affected. After that we never saw any - and any spinning wheel or antique fiber tool with holes was sumarily treated.

For those in the US - in Europe, wood worms are pretty common - in antiques and lots of things not that old. 

Michael White

Here in the Southern US we have power post beetles. wood worms and termite and of course fire ants( which like eating people) which like to eat anything that has not been treated. Since you have an oil base finish we can add a insecticide. When the time comes I will contact the UK and see what you can use. Here we add it to paint to stop power post beetles, carpenter bees.

Michael

Sara von Tresckow

 The product I mentioned is what is usually applied in Europe for their worms.

Submitted by Anonymous (not verified) on