I'm pretty certain I can successfully get the warp onto the sectional beam, but then the thought occurred to me this morning that I won't have a cross to thread the heddles. My usual way of dressing a loom, not the one in question, is back to front with both a threading cross and a raddle cross.  The loom is a 48" Ad-A-Harness Macomber that has just sat since I got it because I'm totally intimidated by that sectional beam.

I would love hints and tips on how to keep the threads in order as I thread the heddles.

thanks

Comments

Su Butler

Hi cgoyer.....if you use a tension box that allows you to create a cross, you can tie that cross off after winding the section and tape it in place on the section.  Or you can just put tape across the whole seciton if you are not using too fine threads, and the tape will hold the thread order in place until you release the threads one by one to thread.  I like to tie a cross in each seciton, then when all the sections are beamed, put lease sticks in the cross, suspend them from the back of the castle and thread the heddles from the cross in the lease sticks.

Hope that helps....

Su :-)

Joanne Hall

Hi C,

If you click here, you will see a sectional cross being saved with a string, going from one section to the next.

http://glimakrausa.com/products-accessories.html

Joanne

cgoyer (not verified)

Thanks for the tips. Now to actually start the process. It will have to wait until this weekend. I'll keep you posted of my progress.

ReedGuy

That's a great tip with the string, it's kind of like a count string used on a warping mill. :)

Submitted by Anonymous (not verified) on