Since I noticed the conversation in another thread, I thought it would be useful to continue the dialog on where to get weaving materials...

My rag weaving is twining using T-Shirts.  Almost all of my T-shirts have come from the Goodwill Outlet, and if I bought 50lbs of anything, I believe it was discounted to 69 cents a pound... Therefore, I could get over 100 T-shirts (or just about anything else) for $35.  This was great for one-stop shopping for my rag materials, and over time, my stash has become fairly well developed.  It's a really good place to find cheap ties, but you won't find a lot during any one visit.

Now, however, the Goodwill outlet has significantly raised their volume prices, so I will need to rethink my strategy...

I do not recommend going to a Goodwill retail store (especially in my area) for any rag type materials, because frankly they charge too much.  A button-down shirt is about $7, and I believe the jeans are comparably priced.

Another good source is just the garage sales, but your success will be really hit-and-miss as to whether you are able to find the right materials at the right price.

I also try to use materials that are really rags, or that people are not likely to wear again... T-shirts with corporate logos and "fun runs" are good examples.

Speaking of the Goodwill outlet, I was always surprised at the number of people looking over the books... and would have a shopping cart full of them... then I realized that these customers were lined up along the wall looking up the ISBN numbers on their cell phones!  I guess that's one way to make some money!  Now, however, the Goodwill outlet doesn't carry the used books there anymore... they must have figured out a better way to generate revenue for Goodwill by sending them somewhere else???

Another thing about shopping at a Goodwill Outlet... Be prepared to handle very dirty materials!  Some people even wear gloves.  It's a lot like treasure hunting...  And of course, wash EVERYTHING when it comes home.

Comments

ridinteacher

Finding weft materials is always a struggle.  I cannot spend much more than 3$ per rug for weft, or I don't make much profit for my time on my rugs.  I believe I have my rugs priced as high as I can and still sell reasonably well in my area.

That being said, most people here are generous with donations of jeans, curtains, sheets, old yard goods, bedding, etc.  The trick is to get the word out that you take this stuff and making it easy for them to get it to you.  Where I live, it is over 60 miles from the nearest thrift shop/salvation army store, so some people are more than happy to donate it to me instead of making a trip!

When I do get to "the big town" :)  I always make a stop at salvation army store.  This store sells blankets and bedding usually for $3 or less a piece.  I look for Queen or King size especially - makes alot of rug!

I would LOVE to find a source for a steady supply of weft - or a way to buy it in bulk that doesn't cost more than my market will bear.  I feel at times I spend more time hunting than weaving.

 

claudia (not verified)

If there are enough of us looking, we may be able to find someone on ebay who is looking to get rid of rags. There are lots of people there who go to the big auctions and estate sales. I'm going to start looking around online and see what is available.

Kay, can you tell us more about twining the t-shirts when you use them for rugs. I've never tried that and I have about 10 lbs of t-shirts from our 4 sons.

Claudia, currently overflowing with rags and looking forward to using them.

Caroline (not verified)

Goodwill now sells books on Amazon, I have bought some good weaving books that way.

I wonder why Goodwill charges so much for things that are donated? Its the same here in Australia; my nearest Goodwill store very rarely gets my business because they have priced themselves out of the market. They also buy up fashion runouts  and sell those, so sometimes its difficult to tell what is new and what is pre-loved. Either way its too expensive for craft supplies.

uwimoore (not verified)

I have found that smaller thrift stores,ones affilated with hospitals or community charities, have lower prices. I both donate and buy from my favorite one. 

Flannel sheets were suggested as a material and I found them, washed, tore them into strip and I'm weaving on my floor loom, warping mistakes and all. (this is my first "anything ) on the loom. (mostly self taught, book learning, a couple of classes and new guild member)

It's pretty amazing to see an idea come out of the loom.

 

villageweaver (not verified)

Great Northern Weaving near Kalamazoo, Michigan has everything a rug weaver could want. It's a big warehouse full of fabric coils, loopers, selvedges, warp, tools, looms. I'm fortunate it's in Michigan. A group of us usually visit at least twice a year! I order one day, and it's here the next...

http://www.rugwarp.com/

Marutabaga (not verified)

 Hi, I am new to the group but have been weaving rag rugs for a long time.  I, too, have been having trouble finding weft material.  Have tried cutting up old clothes for rag weft but not been happy with the results.  I am trying to cut strips and then want to fold over the edges so that the frayed edges do not show.  Any tips?  

Caroline (not verified)

Has anyone tried running their strips through those bias tapemakers? That is supposed to help create a hidden edge, but then I think they also advise ironing the tape. Does anyone do that either? I think it would more than take off the gloss from any project - can you tell I'm NOT best friends with my iron? hehe!

Seriously, I have read of weavers who do iron their rags to hide the frayed edges. But ironing aside, you could possibly finger fold the fabric as you wind it onto the shuttle, and with a little care wouldn't that come off with the edges hidden? You would have a thicker fabric, but that can be compensated for in the warping up.

Its like anything thats worth doing - the more care you take with the preparation, the better the result. Well, it works for my spinning, so thats my theory, <grin>!

Mary C (not verified)

Hi Group

The best place that I have found for materials is estate sales and friends who say they didn't know what to do with old sheets. 

Another resource is t shirts (without seams).  If you start to rip from the bottom it can go continuously and no need to sew pieces together.  If it doesn't go well ripping one way just cut in the other direction and try again.

I have also used drapery and it has a lot of yardage, also found at garage/estate sales.  Here's a picture of a rug I finished recently that was of an old funky valuer gold drape.  Wasn't sure I wanted to use it but since my sister took the time to rip strips I did and it turned out pretty well.

I tend to rip my materials, any other suggestions?  My husband hates the sound.

Mary C (not verified)

The farthest I've gone with ironing is long, long strips to hide the edges then I braid to make handles for my bags.

I have gotten into finger folds for a cleaner look and I do sew the strips together too.

It makes me laugh to set up my OLD ironing board and think about how I had to learn to iron cotton dress shirts:)

claudia (not verified)

Hi Mary,

Ahh, the old days. I have never ironed the edges in for a rug and I like the idea of doing it for braided handles. I used to iron our bed sheets, now my age is showing. Now I iron my finished hand wovens.

Claudia

Submitted by Anonymous (not verified) on