The shed rod can roll and slide around and be really annoying sometimes. It is particularly bad when you have your warp angled steeply upward-the shed rod keeps rolling down or it may be just too big and long compared to the width of your warp.

 

Easy solution........put in another cross behind the shed rod. Follow the easy steps HERE................

 

 

Comments

francorios (not verified)

You can use a couple of elastic bands to keep the rods together and hold the cross.

If you make a "figure 8" with the rubber bands around both the sticks, you will find you can still move the sticks carefully up the warp if you need to. There just has to be a gap between the two sticks.

Have a good day!

dognapper2 (not verified)

I was a little uncertain at first which order to read the pictures - down column and back to top vs left to right, row by row.

Once I focused on what you were doing the light came on and I thought: You CAN DO THAT?   {grins}  - instead of playing with power tools some more and drilling extra holes in the stick (wooden knitting needle) to thread safety string through closer to working area edges. The extra cross would have helped stabilize things a lot I think, but I didn't realize you could add one once the warp was loaded on!!!

Laurie in Maine

bolivian warmi

Thanks so much Laurie for pointing out the confusion in the photo order. I shall edit now and number them. :-)

Laverne

tricotetal (not verified)

Hi Laverne,

Thanks you so much for posting this, it is very helpful.

While weaving my first practice band (now sort-of finished, but not off the loom yet), I did notice that my shed rod was a bit too big and heavy, and kept trying to escape - so I replaced it with a smaller and thinner one.

But placing another stick behind it is very clever, and the way you do it is simply genius!  I guess that is how those people weaving really wide add all those stabilizing sticks behind the shed rod, right?

 

Filomena

bolivian warmi

I have used multiple stabilizing rods when I have done some balanced weaves a they helped keep the warps spread-it looks totally chaotic but it was very effective. I just kept adding rods using the method above. Shorter rods all the same length would be better.

Laverne

Bobbie2 (not verified)

I can just not get this.  I think where I am confused is on step 3.  Lavern would you mind rewording that step for me.  I keep looking at the pictures and it is just not sinking in.

 

Thanks for your help

Bobbie

bolivian warmi

I don't blame you for being confused!! When the site was changed all the instructions got scrambled so that the text doesn't match the pictures and everything got misaligned. Try looking here.

Bobbie2 (not verified)

Oh wow!  The light just came on! LOL  Funny how a few jumbled words can cause such confusion.  I will try that again when I get to sit down to my loom this evening.

 

Thanks,

Bobbie

Submitted by bolivian warmi on