A PROPOSAL FOR NOVICE BACKSTRAP LOOM WEAVERS-By Laverne Waddington

This is where I will post the beginner project notes-yarn recommendations, warping instructions, heddle making instructions etc...so look forward to lots of diagrams and photos soon...................

THESE ARE WARP-FACED WEAVES.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

A WORD ON YARN.

You'll have to forgive me with the yarn recommendations here as I am in Bolivia and we are not exactly spoiled for choice. I generally demo with a very heavy weight cotton which you can see on the left on the ruler-it wraps only 12 times around to the inch. For my own projects, I use 8/2 weight cotton which you can see on the right.

Your yarns need to be FIRM and smooth-nothing loosely twisted or fluffy in any way. Something between the 2 weights would be good for a beginner project. The heavy weight is good for sample bands  and for getting used to handling the loom but for most projects it really is a bit too chunky. It would make a very nice belt though.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------

A WORD ON WARPING.

Whatever you choose to warp around needs to be VERY FIRMLY grounded. The stakes must not move or bend in towards each other as your warping progresses. If you choose to clamp stakes to a table, clamp them VERY TIGHTLY!!!!!.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------- 

And just to whet your appetites....here is one of the first finished pieces by one of our weave-alongers. Esmecat decided to warp up for all three proposals-combs, vertical stripes and horizontal bars with stunning results. You can read more about her piece on this page www.weavolution.com/node/4768.

Comments

Aquinnah (not verified)

 Interesting! 

I am now back again from Sweden. Found some gorgeous coloured cotton yarns there, so I am now well equipped! Sadly not from the second hand shop - they didn't have any - but still. So no excuse not to get started very soon again! I intend to make myself a second set of sticks, somewhat shorter ones, as the length I had felt wobbly and weren't needed for what I did. I will keep those, though. I also intend to make a set for our daughter for a Christmas present. Next I do intend to have a go at the techniques one stage up from pure beginner - I have the urge! In the meantime, I am finishing my nalbindning bag I am making, all from my own spun and naturally dyed wool - all 'experimental' and working reasonably well, have signed up for a multicultural course in quilt making, knitting more socks, sorting home dyed wools and generally creating a mess............

 

bolivian warmi

Whoa! You have come back full of plans. Great! Good to have you back. Lucky you gettig those yarns.

You will see that I am in the process of putting up a third beginner tutorial which can be used a a stepping stone to the intermediate one. I haven't gotten the actual weaving instructions up yet but hope to do so today as soon as I get this latest project off the loom-almost there!

I think a backstrap loom will make a great Christmas present. We have another new memeber who is making one for her son's birthday. Cool!

Anyway, welcome back Aquinnah!

Laverne

 

 

bolivian warmi

Just curious about how many times this tutorial has been read............By making this a recently acitivated thread, it will appear on the main forum page where you get info about how many times the thread has been read.

soulsister (not verified)

Hi Laverne, this is absolutely incredible. If reading and peeking counts for anything, I am hooked!!! :-)

It will be a little while before I can actually get around to weaving a beginner piece, but already I am planning assembling a loom.......

Thanks for being here!

Edith.

bolivian warmi

Thank you Edith,

I am glad to see that you are finding your way around the forum. It takes some getting used to, right?

Let us know how you go with making your loom and remember to give us all a shout if you need any help at all.

Laverne

dognapper2 (not verified)

I'm trying a short warp experiment using the "If you are feeling adventurous you can warp up for this using 4 stakes..." video.:)

Are there (supposed to be) secondary crosses where the colors come back together? Do you keep those crosses secure...or just the one "NEW CROSS" shown above?

(I have crosses when the 2 colors held together come back around the end stakes - did I do it wrong?

Laurie in Maine

bolivian warmi

Hi adventurous Laurie!

There will be crosses where the two colors come back together (you didn't do it wrong)  but you don't need to preserve those crosses-just the main cross that separates the two colors on the two extra warp stakes you are using. So when you are ready to take this warp off the warping board, you will be just replacing the two end stakes with your loom rods, as you would normally do, and replacing the two extra stakes with cross sticks.

Laverne

 ps..........are you able to snap a picture of this on the warping board just to show everyone else?

 

 

dognapper2 (not verified)

Thank you for the quick reply - and reassurance! 

I will take pictures and be blogging, as well as checking in here with a progress report. My daughter just moved to Minnesota so there will be much Mom Blogging as a way to keep in touch. I'm using some crochet cotton this time - but only a short length with what will likely be an inch or so wide.  Hoping the heddle strings work easier this go around :)

Laurie in Maine

http://sockshavenothumbs.blogspot.com/

siseltikva (not verified)

Here's my try! I combined vertical bands and the comb pattern. I didn't exactly intend on there being that checkered board look in the middle but that's how it came out. But I did mean to do something different than the tutorial, I didn't want to have the line in the middle (which I guess makes it the comb part but... yeah) It took me the longest time (I'm talking at least an hour) to figure out how to rearrange the warps on my fingers, with the cross in the middle lol. But I got it eventually.

My selvedges are still atrocious. I think I'm going to take this one off the loom and come back to it eventually. I don't have the heart to undo my weaving thus far, even though it still doesn't look good. I can't seem to win with my end warps. When I think they're the right tension to match the others, they still end up looking funny. Oh well. I'll get it at some point.

Yarns... I used mostly DMC embroidery perle cotton (#5), and the blue stripe is 5/2 perle cotton. I like how its bigger, gives it a little texture.

francorios (not verified)

I like it.

The turquoise stripes are a beautiful accent to the yellowish/reddish colors. The checkerboard in the middle is very sporty looking.

Don't unweave it, finish it as a keyfob. You'll have it around to remember where you started.

Have a good day!

bolivian warmi

Oh it's lovely Tara. The perle cotton looks fantastic. Naturally you won;t get perfect edges as you have changed to another type of yarn and you have to get used to it all over again. Weave on-things will start to settle. That cotton looks so gorgeous and shiny and I love your choice of colors!

Yur avatar is intriguing! As was your project photo. It took a looong time to load on my computer and it really had me guessing as all I could see at first were computer keys and one thread. Then I figured out that that was your loom bar on the right.......

siseltikva (not verified)

lol Thank you! Thanks for the sweet complements. You're right, I need to be easier on myself. This was a completely new yarn, even if it was the 4th thing I've woven. Good point :) 

My avatar is me at my loom. Not actually weaving, though, because I was taking the picture lol. It's hard to tell, I know. It's the only one I got of me and my loom - even if fuzzy. I like the abstractyness of it hehehe.

Yeah... I think my project photo was originally HUGE. Like bigger than huge. Take over your computer huge. My fault. I will be better about resizing them before I post them :) 

Thanks for all your encouragement and good help and all that, as always!

siseltikva (not verified)

Thanks so much! I took your advice and made it a key fob, even though it was probably a little too long for one :) But its okay, it means I won't loose my keys and I'll have a nice reminder with me all the time.

historicstitcher (not verified)

I love your color choices!  The turquoise looks fabulous popping out like that!

Why take it off the loom, though?  Just grab a couple more sticks and make another for your next project.

mydogwidget (not verified)

 Hi, Laverne,

 

In the first photo at the beginning of this tutorial, I see that you have an example of the "comb" pattern  using more than 2 colors successively  (on the right).    Having just finished my first "comb" project, I'm trying to figure out how you warp something like that.   Could you explain or direct me to the information?

 

Thanks!

 

"Widget"

bolivian warmi

Hi Widget,

I am guessing that you have made a single comb like the ones on the two bands on the left.

So, looking at the black and red example on the left, you warp with red and balck together as per the instructions on page 1 of this tutorial. Then you rearrange your cross so that you have all your reds in one shed(shed A)  and all your blacks in the other (shed B). Then there is a section of all reds, that is, reds in both sheds A and B which forms the center rib of your comb). Following that you arrange  the reds and blacks once again in two sheds but this time the reds will be in shed B and the blacks in shed A.

I f you look at the example on the extreme right which is the one that you would like to weave, you will see that it starts off with a single comb. Let's look at it reading from right to left. The difference here is that the first half of the comb on the right is brown on white and the second half is brown on beige. So you need to warp brown and white warp threads together followed by only brown (which forms the center rib of the comb) followed by brown and beige and then rearrange your cross as per the instructions above for the black and red band.

I f you want to go on and weave multiple combs, following the example in the photo, you would then continue with a few warp bouts of only beige (to form the center rib of the beige comb) followed by red and beige together to start the red comb. Then wind a few bouts of only red for the center of the red comb and finish it by winding red and tan together.

The final part will then be a few bouts of only tan (forming the center of the tan comb) and then tan and white together.

If I were at home I would have diagrams and photos for you! Perhaps Rose Goldilocks will come up with a nice computer diagram for you.

I hope this helps AND NOW....you owe us a photo of your completed comb band! Plaese post it here :-)

Laverne

mydogwidget (not verified)

 Thanks, Laverne, you explained it very clearly!    :)

 

And here are my first projects:  my backstrap and the comb band.   I used Sinfonia cotton yarn (mercerized) and I really like the feel of it.   The blue in the backstrap is actually more of a periwinkle blue that they call "slate," but all the other colors look right.   :)  

 

Widget

 

 

bolivian warmi

Thank you Widget. Looking good. Looking forward to seeing your multiple comb band.

Laverne

Evelyn (not verified)

What fantastic instructions.  Thank you. 

As I am getting ready to start a project, I have been reading all the great information you have available.  One thing I am curious about though is length.  What does one do with a long warp?  Do you just have to have a lot of room? Or is there a way of rolling the warp on the sticks or tieing it off?  Sorry if I have missed this - there is a lot of reading. 

 

Thanks,  Evelyn

bolivian warmi

Hi Evelyn,

I have a set of pictures on my Flickr page that show how to roll up the excess warp around your far loom bar using an extra stick. I would use paper around the warp as I roll as one would do when rolling the warp up on other looms.

www.flickr.com/photos/39560980@N05/sets/72157621714345915/

Try to stick to shorter warps for your first backstrap weaving experiments and go longer later when you feel at home with the loom.

Laverne

 

 

Evelyn (not verified)

Great - This makes sense and not difficult to do, but yes, a shorter warp is first!  Thanks,  Evelyn

Submitted by bolivian warmi on