I finally got set up today for my first try with backstrap weaving. Couldn't find anything handy around the house to warp onto that  worked well - but then figured that since this was just going to be a starter sample, why not try a simple wrap up directly on the warp and cloth beams? 

So I fastened my "seat belt", tied the end of the warp thread to the front beam, and then just wrapped back and forth from front to back.  The trick is to be consistent (e.g. coming up and then over) every time on both sides. That way you get the threads to cross. With a small project length (e.g. just between the  two bars without needing to be wound up) and with the bars a reachable distance apart, this worked very easily.  I kind of wiggled threads as I went along to make the lengths even while I was wrapping. Then just tie onto the last bar and follow Laverne's directions for making the heddles.

It worked! Now I have a little strap to tie up all my sticks.

Comments

Caroline (not verified)

Thats great! Can you post piccies please? With warping, its whatever works for you! Franco has some very ingenious methods involving bar stools upside down, or you can clamp to a table or desk top. virag tried warping by pushing her warping sticks into the ground. Its whatever works for you.

Clamps should be a necessary part of your weaving kit, useful for all sorts of situations including tying up to when nothing else works!

bolivian warmi

Congratulations Barbara on your first completed project and your ingenuity!

I second Caroline's request for photos!

Laverne

 

Submitted by Anonymous (not verified) on