Hi all,

Recently I built my wife a floor loom and we have been looking for projects. I am a guitar player and one type of cloth that is interesting to me is what is used on Vox amplifiers. I have included a link to a forum post (around halfway down the page) which has a zoomed in photo of the weave. I believe (though I am quite the novice) that the warp goes from right to left in the images as shown. What would be the best way to achieve this sort of weave? I have some ideas but they all seem very complicated.

Thanks for your help!

Nathan

The link: http://forums.vintageamps.com/viewtopic.php?f=2&t=36562

Comments

Diane Parrilla

The reed is a 12 size.  What size yarn do I need for the warp.  ( for navajo weaving) What size for the weft?  Warping for tapestry is that different from the traditional way of warping?  Thank you. I have lots to learn. All in all I have definitely decided to do my main weaving on the floor looms and only tapestry on the table loom.

Excuse me for my lack of knowledge but do You use the reed for tapestry weaving?

mneligh

Real Navajo warps are wound in a figure 8, so you can't thread them though a reed.  You beat them with a fork.  You use single ply, wool warp called Navajo warp.  Your weft is handspun churro, only natural dyes and colors.  Because it's weft faced, the sett is not that tight so the weft can pack in.  You use shed sticks, not treadle-operated shafts.

If you don't choose to go that route, the other extreme of tapestry weaving is a loom like the LeClerc Gobelin with reed and treadles.

Are you really meaning to do tapestry of one sort or another, or designs based on Navajo weaving, which could be double weave, summer and winter, rep, etc?  All are possibilities and might be more appropriate for your loom.

In general, if your design is weft faced, you need a more open sett, unless the weft is extremely fine.  5-8 epi might do for a start, although I just counted threads in 2 good Navajo rugs in my house and they are both 10 epi.  Their wefts are lighter than sport weight.  They are very dense.  

The traditional loom is a vertical warp loom, and I have had better luck beating in the weft without a beater on a vertical rather than a horizontal warp, so I wouldn't go that fine on my first try.  You may also have difficulty achieving that density on a lightweight loom.  It depends, I guess, on how ambitious you are.

Diane Parrilla

Thank you so much for input.  Now that that you mentioned it I would like to make the carpet as authentic as I can.  I have researched the churro spun yarns and was surprised to find out how expensive it is.  I was toying around with the idea of spinning my own yarn. Would I be able to use a spindle to start out with?  My budget is pretty low.  

 

I guess what I am asking is it possible to start out with just the bare basic essentials such as spindle and hand carder and a good learning CD to get started? Maybe down the road I can invest more fundings. What are the advantages of spinning your own yarn. Do you know of a good CD?

pammersw

Respect The Spindle (it is also a book, but seeing the dvd is probably easier to learn from.) Abby Franquemont

You can find it at interweave.com and on amazon, too, I think. 

mneligh

OF course you can use a spindle.  There is even one specific to the Navajo.  One can be made for about one dollar, or you can spend upwards of a hundred for semi-precious stones, or anything in between.  I find it is easier to spin Navajo warp on a spindle than a wheel, where  I am so used to spinning yarns for plying that I have to struggle to not spin that way.  When you are plying, the Navajo used a 3-ply technique for weft yarns that was like a giant crochet chain. 

The advantage to a Navajo spindle is that because it is thigh-rolled, it gives even novice spinners a great deal of contol.  The advantage of a Navajo loom is that besides taking up very little space and being made out of minimal materials, it facilitates tight beating of the weft into the warp.

The downside to all this is that while all this is good in theory, it will lead to the acquisition of a lot of new skills quickly.  Perfect joins and weft tension as well as the spinning don't come without practice.  Of course, if you are going to be authentic, you need to learn the dye plants and how to use them as well . . .

sally orgren

I would suggest reading some books by Gladys Reichard (Weaving a Navajo Blanket) to get an idea of how the weaving is done. Her husband was a reservation doctor in the 30's, and she spent her summers learning the weaving traditions.

Depending on where you live, you might also investigate taking a Navajo (Diné) Weaving workshop. I took a 3 day class with Pearl Sunrise at Convergence in Denver, 2004. I believe you can also find guided weaving trips down to Chaco Canyon by native weavers.

It is worth seeking out an opportunity like this to learn as much or more about the culture as to learn the weaving process.

Good luck!

 

Diane Parrilla

I very much appreciate everyone's help.  You all are wonderful.

Sincerely yours

.Diane Parrilla

Diane Parrilla

Can any one reccomend a where to get the best deal buying raw wool and dyes.

Thank you

 

 

 

 

Diane Parrilla

I ordererd the spindle,hand carders, and the cd.  I have everything but the wool can anyone advise me where to get wool and churro wool? I am so looking forward to this new

exiting project.  I was wondering could this be a money making opportunity

 

.

 

portunity?  .

 

 

 

Another question. What's the best small tapestry loom(other than a mirex) Are there other tapestry looms that have a shedding device

Diane Parrilla

Is that a good tapesry loom?  mirex looms out of my price range.  Whats the next best.  I like the copper looms but the weaving width is too narrow for my needs.  Whats a good book for projects and patterns for schacht tap. loom?

There is a 12"mirex loom for $200.00 on ebay.  Should I consider buying a mirex?  What are the advantages of a mirex vs other tapestry looms?  

Thank you

Diane

Like I said the mirex look is out of my price range. It seems to me what I'M hearing from the grape line is that the mirrex is the Cadillac of all looms.Oh well maybe one day I'll stumble on the mirrex deal of the century but for now I can only wish. Thank you

tommye scanlin

There are several small tapestry looms, including ones you could build yourself--see the Archie Brennan website for his diagrams of not only the smaller copper pipe frame loom but also larger looms made of plumbing pipe and even bigger ones of scaffolding. The Mirrix as Cadillac of looms? Well, as in everything, that depends. It's impossible to say that there's a "next best" for loom to use for tapestry. Any loom will work--it's the method/technique and gaining skill with those that are important rather than the equipment. In earlier posts you've mentioned wanting to learn about Navajo weaving and if you've done some research about that online you'll see that the looms used in traditional Navajo weaving are very basic, made with wood components. There are s few folks here at Weavolution who've built frame looms adapted from Navajo looms--maybe you've seen their posts. Here's a website that gives information about learning about traditional Navajo weaving: http://weavinginbeauty.com/find-a-weaving-class/where-to-learn-indigeno… There are several DVDs available for learning about tapestry weaving, including a set in which Archie Brennan and Susan Maffei are doing about 16 hours worth of instruction. The Nancy Harvey videos made several years ago address tapestry weaving, as well. There are quite a few books with tapestry weaving basics available, including those by Carol Russell, Kristen Glasbrook, Kathe Todd-Hooker, Nancy Harvey and Joanne Sokora. Maybe you might look for one or more of those books through interlibrary loan or see what's available through a weavers guild (if there's one nearby). There's also the free ebook about some tapestry projects at Weaving Today: http://www.weavingtoday.com/tapestry-weaving/ The bottom line is that learning about tapestry weaving can be fairly complex in spite of it being basically a weft-faced plain weave structure. But one begins somewhere! If you want to begin with a simple frame made of wood strips, learn basics about techniques as you continue to research about looms and other resources for tapestry, you'll be moving forward. I'd say don't worry too much about getting the one and only loom for tapestry that you'll ever want or need... just begin simply and see where it takes you. Tommye

Diane Parrilla

I cannot believe my good fortune. I was given (free) approx. 5 year old artisat 4shaft floor loom.  It looks like to me that it has back hinge treadles.  Does any one know if the new artisats come with that new feature?  What are the advantages of having the bht?  

     How would anyone rate this particular loom?  I am new to weaving . I wanted to weave rugs but I have heard this particular loom is not capable of that. Is this true?  Thank you all. I just wanted your thoughts as how you feel about this loom as a beginner loom for a 

new weaver?

ReedGuy

Right off, one advantage I can see with back hinged treadles is easier treadling. The force is on the end of the treadle opposite the hinge so you have less effort. You can step down with the weight of your leg doing the work instead of having to use your ankles to rotate your foot backward and forward. That would seem to be hard on the ankle joint to me.

Diane Parrilla

I was just about to buy a 1974 artisat loom.  The seller assured me that it wove nice fabric

Diane Parrilla

I wanted to weave some nice towels is cotton chenille yarn ok for weaving towels?

Diane Parrilla

I need help identifying a used tabletop loom.  The wood appears to be mahogoney.  It has wooden brake ratchets. The levers on the side are wooden levers.  The knobs are round on the side of the roller beams.  It's a four harness 18" loom.  I am convinced it is far from home made. I would say the age is 40-60 years old. It is in excellant shape though.

 

 

 

mneligh

In order to demonstrate how the sample in the original post of this thread, I have been busy.  I acquired a large Navajo loom on which to do leno and pile knotting, and have set it up and warped it.  I know I could do the leno on one of the floor looms, but they offer no mechanical advantage and they are busy.  I have the twining in, but have yet to set up the heddles.

In the next few days, hopefully, I will have enough woven to take pictures.  I don't intend to do V's as shown above, but we'll see.  I'll do something that shows that you can do V's. 

The reason for the push right now is the camera.  My husband is off on a NEH grant with his, but some frog biologists from Tulane will be staying here for the next couple of weeks, and they might have a personal camera or appropriate phone.  

Stay tuned -- I'm working on it!

Diane Parrilla

 I have recently acquired 3 small reeds ranging from 3.5 to 5.0 inches they have 8-10 dents.  What are these used for ?  My husband is planning building me a tension box - could they be used for this purpose?

 

 

 

 

laurafry

I would expect they would work just fine for a tension box.

Laura

Diane Parrilla

I am puzzled as to the maker of my newly acquired loom.  The handles are wood not plastic levers.  I have never seen wooden handles only the multicolored plastic ones.  The brake ratchet is made out of wood.  It has round cute knobs to turn the oller beams.

   I am unable to send pix because I have an adroid phone.  The loom is probably made out of mahogoney .  It was advertised as a 2 shaft loom for $25.00.  I was delighted at both price and that it is a 4harness loom. It's a gorgeous loom. If anyone has any knowledge of this loom I woulh

Diane Parrilla

I just acquired an older schacht tapestry loom and unfortunatly it did not come with instructions.  I thought no problem I will watch the instructional video which is what I did.  I noticed that my loom does not have a dowell below the lower first dowell.  Does any one know how to apply the warp without having the dowell? What is the benefit of that dowell rod that the older models lack? Should I have my husband add one on the loom?

 

Diane Parrilla

Regarding the schacht tapestry loom - to maintain even spacing between warp threads should it be twined?

Thank you all!!!!!!.

Diane Parrilla

I found a warping dowell for my schacht tapestry loom.  The instructions are horrible.  After I warp the loom what do I do with whats wrapped around the warping bar?  I watched tapestry level one dvd and it does not explain it either. If anyone who has weaved on a schacht tapestry loom could help I would be so greatful.  I can not even get started.  

Di

Submitted by NateM on