Hi again, Anybody have any great tips for cleaning up the harness chains and metal parts? Best to order new ones? There isn't a lot of rust, but some. I've seen mention of bluing the metal parts. Is this something that I can do or do I have to find a shop to do it? Or should I paint them with something like Rustoleum? What color are the jacks supposed to be? black or shiney? And, I think I'm missing the warp beam crank. What do they look like? Thanks!

Comments

sewwhatsports (not verified)

I need to remember all this information for when I get my set up from you Michael.  I will save it and print it all out to have as a reference.

Rena

Michael White

Connie, I would put the chain on as is. You can always take out a piece later if need be. If sounds like you can having fun getting your loom ready for action.

Michael

Michael White

Rena, if you have been reading along you know I have been cleaning parts. Since I had to clean the parts for Cheryl's loom I just added your parts to the mix. So when you get your parts they will be ready for you to add to your loom.

Michael

andsewon (not verified)

DH and I worked on the new bumpers today and they look fantastic. He used the rest of the board that we made the bottom brace out of, so the color matches the rest of the loom. yay! The rubber pieces from the "Moving Men" furniture slides worked perfectly. When the beater bumps against the castle, it has a nice smoosh sound. Not too bouncy and not too hard. I used contact cement to glue the bumpers to the blocks. It looked so nice that I made another set of bumpers for the other side of the beater so it won't bang when it hits the front breast beam. LOVE! the contact cement! I'm working on the heddle bars now. Soaking them overnight in the Krud Kutter did wonders. The paint that was on them is now coming right off. The rust is gone. I wonder if just waxing them would work instead of blueing? Connie

Michael White

If you don't like the way they look you can always remove then and blue them later. Blueing all 32 bars would not take more then 30 min. What I do is blue all of them, then using a spray bottle wash them down. then spray a rust inhibitor on them. I always do one task at a time. Michael

sewwhatsports (not verified)

Michael. You have made my day. I SO appreciate it. I will call you this week to finalize everything with you. Rena

andsewon (not verified)

Oh, my aching back!  Standing on cement all day just kills me.  And my hands ache like crazy, too.  I've been getting to know Mr. Ryobi, the power drill very well, today.  I think my finger is permanently bent in the trigger position.  vbg  I started around noon and stopped only a couple of times to eat.  Just quit at 11:00pm.    It is amazing how time flies.......  I finished up the heddle bars using a fine grinding brush in the drill.  It really made them shine.  I waxed and buffed each one.  They are DONE!!!   Done! Done! Done!   I feel like I've worked on them for ages.  lol   But when you think about it, there are 24 of them with two flat sides and two edges to clean.  That is a whopping total of 96 surfaces that are 32" long.  Whew!  They look fantastic.  I'm so glad that I decided to clean them up afterall.  I just knew it was going to bug the heck outta me.  The heddles didn't slide very well on them because of the icky silver paint (and rust under that).  Now they're slick as a whistle!  and so shiney!  The frames are still in progress.  I have 9 of the 12 all ready for the Rustoleum Rust Converter spray.  This is neat stuff.  Goes on easily and dries quickly.  It's a flat black and actually looks pretty nice.  I'm going to spray each one with this, and then I'm going to stop.  The actual semi-gloss paint will have to wait till warmer/drier weather.  I did just one side of one frame to see how it will look, and I'm afraid it is going to take days for it to dry properly.    I'm hoping I can get DH to help me take the loom upstairs tomorrow evening.  Yay!  I want it out of the garage before I start spraying black stuff!  lol  .......now where is that Motrin.....and the Tylenol.........Connie ETA:  Not sure why, but it decided to cram my post into one big paragraph.  I guess Weavo is still having issues. 

Michael White

Having done what you did today for years you end up with "trigger fingers" a medical condition where your finger(s) lock close. You have to use a other finger to open them. When you do they jump open. Had surgery on 5 fingers, two on one hand and three on the other, for this condition. The things we do to our body to make a buck.

Michael

andsewon (not verified)

Wow!  I'm glad I only have 3 to go.  I will definitely be careful in the future.  Poor you!!

 

Connie

andsewon (not verified)

I sanded and cleaned the last three harnesses today and gave all 12 a coat of Rust Converter. Now they are protected until I can paint them this summer. They look clean and pretty. Didn't get to move the loom frame upstairs tonight because DH came home early from work feeling yucky. Went straight to bed. Got up to eat around 8pm and back to bed. Darn! Oh, well. What's one more day? (groan) lol I hung the harnesses in the loom as I finished each one so that it could hang to dry without touching anything. It looks impressive with all 12 in there! lol It only had 4 hanging in it when we picked it up (if you remember that scare). I installed the heddle bars, too. No heddles, yet, though. I still need to assess that situation. It came with several bags of heddles; both flat and inserted eye. Don't know how many of each that I have. Can you mix them on a warp? I hooked all 12 up to one treadle just to see how heavy it would be, and dang! I cannot imagine what it must feel like lifting the 56" ones. You'd have some serious glutes in no time! I feel like I've given birth.......to a loom. Will my fingers and nails ever be clean again? Once it is upstairs, I'll take some pics! The garage just looks awful and the lighting is bad. Connie

DebbieB (not verified)

Can't wait to see those pics, Connie! You can mix heddles on your loom, just not on the harness. Give each harness its own complete set of one kind of heddle.

andsewon (not verified)

Thanks!! I'm so anxious to get it upstairs and see how it looks! lol Ok, so who has the best price on heddles. lol I see that Macomber sells the stainless inserted eye style for $25/100. At that price, the heddles are going to cost more than double what the loom did! 12 harnesses at 20 epi at 30 wide" = $$ alotta dough! 7200 heddles @ $25/100 = $1800 yeah, that's not gonna happen. I have about 1000 inserted eye (half stainless, half not) and at least a couple thousand flat steel ones, so that helps. But my OCD tendencies compell me to have all the same. ROTFL Ideas? (and NO, I do not want to make 7200 string heddles!) Connie

Restless Knitter (not verified)

I don't think you need that many heddles.  Even at 20 epi on a 30" frame, you aren't going to be putting all those ends on the same shaft, they'll be spread out over 12 shafts.  I think I had around 1000 on my 12 shaft and it worked out fine.  600 heddles on each shaft is more than I'd ever use. If you have a couple thousand flat steel ones and want them all the same, I'd use those and not worry about ordering any more. 

Michael White

Connie, you are not going to have 20epi on every harness, this amount is divided out between all the harness. At 30 epi x 30"=900 heddles so if you have 1000+ you are good to go. Mixing heddles, as long as the eyes are the same you can mix the heddles. On Cheryl's looms she has wire, flat and insertion eye heedles mixed all over the loom. The nice thing about the insertion eye heddle is the fact that you can "insert" it on the bars with out having to take the whole thing apart. 

I am waiting to see "PICTURES" of your new baby. Have you planned your first project? 

Michael

Michael White

Looks like you and I are on the same page with our thinking.

Michael

andsewon (not verified)

OMG!!! Now do I feel stupid or what? LOL Of course, what was I thinking? lol Can you say "Panic Attack?" LOL Connie

Michael White

That is what happens when you count with sore fingers (g)

Michael

andsewon (not verified)

Shoulda used my toes! Connie

andsewon (not verified)

Still waiting on getting the loom upstairs. DH has been "under the weather" with an inner ear/sinus thing and hasn't felt up to helping me get it upstairs. (I'm sure it is going to take some serious straining...lol) And, I ordered the 3 new aprons from Macomber on Tuesday. I was going to make them myself, but after seeing a new one made by Macomber in a picture on another loom, I decided that I REALLY like their set-up. To duplicate that double-bar style, I'd have to get the bars, etc. and the cost to me would end up being almost as much by the time I'd make them. So, now I wait. It is excruciating! lol Every now and then, I got out to the garage and pet it. ;o) Connie

andsewon (not verified)

The loom.......(wheeze).......is.......(gasping for breath)....upstairs! Yayyy! When DH and I picked it up in the garage, I said, "Oh this isn't so bad afterall!" I had taken everything off that I possibly could to reduce the weight. We carried it around to the back patio, up 2 steps, then up 4 steps.......to the back door, up one more step. Doing fine. Got inside and started up the stairs to the bonus room. These are straight up stairs....about 20 of them. OMG!!! I am positive that I will not be buying a larger one intending for it to go upstairs unless it is completely unassembled. lol Tomorrow I'll take some pictures! Connie

DebbieB (not verified)

What??? Don't you have a flash on your camera??? :) We're all waiting on the edge of our seats to see this fantastic restoration!

andsewon (not verified)

LOL, Debbi, I don't even have the harnesses all put back in it yet. (vbg) And I have to arrange things so that it looks JUST right..... (In other words, I need to get some of the schtuff out of the room so that ya'll can't see my clutter!) I was telling DH that I sure hope the pics come out good because you guys are all expecting to see a miracle. lol He said, "Well, the only thing you haven't done is have the harnesses gold-plated!" lol I scoffed at him and said, "Are you crazy.....that would look horrible. They need to be silver plated!" But seriously, wouldn't that be cool? or chrome plated? Connie

Michael White

of a 48" Macomber going to the fair. N U want me to buy the 56" heavy weight loom, right. No one have bid on this loom so far.

Like Debbie says we R all waiting to see this grand restoration project.

Michael

 

DebbieB (not verified)

OK, now I've seen everything. *grin*

andsewon (not verified)

Debbie, you nailed it! lol Michael, With that set-up, you could handle the 56" just fine. Love the little cart/dolly that you have made. "Have loom, have pickup truck, will travel!" Connie

Michael White

That was the first and last time (I guess) that, that loom will go to the fair. It is back to the 22" harrisvile copy I made. Here are pictures of Cheryl weaving on both.

 

andsewon (not verified)

I still owe you guys pics! Well, I've just this evening completed putting all the heddles on the loom. One thousand two hundred heddles takes a long time to get them on JUUUUUUST right, dontcha know. These were just in big bunches stuffed inside plastic grocery bags, all turned different directions, etc. Some were a bit dirty, so that involved a bit of touch up with steel wool. They're all in really nice shape now with a touch of Howards on them for shine and protection. There are two different styles of inserted eye heddles. One is the common one that you see on most websites now. I have 400 of these. Gowdey Reed sells this same style for $15/100 in case anybody is looking for more heddles. This is a fantastic price. http://www.gowdeyreed.com/handloom_heddles.html The other style must be older because I've not run across it anyhere on the net. It is more of a hexagon shape with the eye being a true oblong rather than oval. I have 800 of these. Now, am I the only one who's OCD tendencies are going crazy right now? LOL I really, really, really want them to be all the same (like the ones from Gowdey), but I keep telling myself that common sense should prevail and not waste the money to buy more. BUT!, if anybody happens to have the hexagon style and wants more of them, I could sell these to you and then I could get the other style. :o) PPPPPLLLLLLUUUUUUEASE!! (saying it like Roger Rabbit) Also, I've been crawling on the floor all evening getting the treadles tied up. What a comedy of errors that was! By the time I got to the 14th treadle, I had it down. I've chosen a 12 harness pattern that Bonnie Inouye worked up for me that is a point twill. (She was adapting a 16H pattern that I'm in love with to a 12H so that I could sort of weave it.) Here's a link to the draft: http://www.flickr.com/photos/andsewforth/5501052007/ The aprons still aren't here, and I really wanted those to be on the loom for the pics, but.... So you can see that I've been busy getting her all gussied up. One thing is for sure, doing a restoration on this has provided me with a thorough understanding of how the loom works. I'm sure that will be a huge help when troubleshooting issues in the first project.

andsewon (not verified)

The Aprons are here! The Aprons are here! I'm heading upstairs to put them on. I'm so excited I can hardly stand it. lol

Michael White

for you. I know Debbie is pulling her hair out to see what come off of this "gold plated" loom. I know you have enjoyed the adventured of getting this loom ready to weave. I hope weaving on it will give you as great a sensation of enjoyment and bliss as the contentment you have had in seeing this loom come back to life.

Michael

 

DebbieB (not verified)

on her over on Ravelry, but I'll drool here too. She looks FANTASTIC!!! Congratulations - you deserve her!

andsewon (not verified)

I just can't hardly wait to start warping!

neweaver (not verified)

As a new Mac owner I've enjoyed following your naration on your restoration.  Your loom is beautiful, you must be very proud.  Makes me think I should've taken more time restoring not just cleaning my loom.

wolfmoonweaver… (not verified)

It looks fantastic, you've done a lot of work!

 

Michael White

before I could start typing, my old eyes were blinded by the shine of the new chain. Your loom looks great! A job well done.

Michael

andsewon (not verified)

Hi Michael, Those are the old chains that I cleaned! ;o) I haven't been able to find S hooks in the right size so that I can put on the new ones. When I find the right diameter, the hook is too short. When I find the right length, the diameter is too big to fit through the holes in the jacks and frames. If I had put the new ones on, it might have damaged your eyes permanently! Connie

Michael White

You worked over time cleaning and "polishing" the chains.

Michael

Penn (not verified)

What a beautiful job, it just glows. I hope you feel it was worth the effort, and you enjoy working on it that much more. I love the rich color, which looks more cherry than the oak/maple of most Macombers. Was that from a stain or tinted finish, or is it just age-toned wood with a clear coating? - Penn

andsewon (not verified)

I couldn't be happier with it. I actually love fixing old equipment up so they're like new. It is age-toned. I use the Minwax Fast Drying Polyurethane. I was going to just use it on the beater and breast beam and treadles for a durable finish where the loom gets the most wear. But it was SO easy to apply that I ended up using it on the whole thing. I got the satin finish and it is really nice. Just a touch of shine. Not glossy at all. The flash from the camera makes it look a bit more shiney than it really is. Thanks again! Connie

Penn (not verified)

I've had good luck with Minwax's poly, too. I'll probably go with it when I do mine next month (ha).

andsewon (not verified)

Remind me to never again put new heddles on my loom. Oh, my aching back! I lucked out on an auction on ebay for 1200 inserted eye heddles! Total with shipping was $32.50! How could I resist? My OCD was reacting horribly to having different styles of heddles, so this was Heaven sent, right? lol Well, they're all on. And if I EVER have to do that again, I think I'll give up weaving. Putting on 1200 heddles twice in less than a month is not sane. lol But it looks SOOOOO nice now! And I have lots of extra heddles for when that 40" 16H comes along. ;o) Ever hopeful, Connie

Michael White

to replaceing this many heddles is to remove the frame from the loom. Remove the heddle bars and slide them into the new heddles then replace the bars and rehang the frames. Sorry you didn't ask before you stated.

Michael

wildwoodlisa (not verified)

Hi Michael -

I have a new-to-me 36" Macomber and I have a couple of questions.  If I want to add a back beam, can you give me a run-down of the options available and why I would want each?  Also there are these two wooden pegs down by the lamms (attached by small ropes).  Can you tell me what they are for?

Thanks -

Lisa

Dawn McCarthy

You did a very nice job!  Now we want to see all the wonderful things you will weave.  Congrats and very well done!

Dawn

bloominloom.com

 

Michael White

The sticks are for pushing down the lamms when putting on the hooks. They are a pain in the ass. It would be better to purchase a lamm pushing bar. Picture attached. Macomber makes three beams, a plain beam, a half yard sectional beam and a one yarn sectional beam. You can do a search on how to use each type of beam.

Submitted by Anonymous (not verified) on