Hi again, Anybody have any great tips for cleaning up the harness chains and metal parts? Best to order new ones? There isn't a lot of rust, but some. I've seen mention of bluing the metal parts. Is this something that I can do or do I have to find a shop to do it? Or should I paint them with something like Rustoleum? What color are the jacks supposed to be? black or shiney? And, I think I'm missing the warp beam crank. What do they look like? Thanks!

Comments

Michael White

The jacks are cast bronze and will not rust, just maybe dirty. If the harness chains are very rusty you can just replace them. The chains is cheap and can be had at most hardware stores. If the frames have light rust they can be sanded and sprayed with a rust converter. Then painted with Rustoleum. The heddle bars and lams are a other story. The bars are blued and I have never see any that did not have some rust. You can do a search (top right) for a lot of information on rust removing. You could paint them if you like. Because the lams parts move painting them is not a good plan. I would remove the rust then spray with a rust inhibiter. I like Blaster 50, it goes on wet and dries to dry film. I will post a picture of the beam crank and the brake handle late today.

Michael 

andsewon (not verified)

I found out that my loom was made in January of 1954. It was sold with 2 beams and the upgraded friction brake. It still has all of this. Eddie gave me prices on replacement parts: New crank $60 (has to be special made for 3/8" square bolt they're 5/8" now) Just frames with heddle bars $50 each Stop bar strips $12/pr Beater bumper $3/pr Cord restring kit $25 Apron kit with double bars $32 super hooks $1 ea He recommended using rustoleum for the cast iron pieces like the brake and heel bar hooks, etc. They come painted with enamel nowadays. I forgot to ask what just heddle bars would cost. Mine look pretty decent. Off to go pick up the rest of the harnesses now! Wish me luck! Connie

andsewon (not verified)

Thought I'd report in on my progress thus far. Picked up the missing frames yesterday and the ancient-looking lamp with one of those adjustable necks. So retro! lol The frames that weren't on the loom are a bit rougher. I think the box they were in got damp on one end. So, I started to clean one up just to see what I was dealing with. Turns out, a lot of the rust is just surface rust and mud/dirt. A good bit of it rubbed off. I took #0000 Fine steel wool and rubbed down all the surfaces. It evened out all the shiney spots (not many left) so now they have an even dull black finish. After that, I gave it a coat of Howard's Feed N Wax and you would not believe the difference. Most people don't know what a great job it does on metal. I also used it on the cast iron parts that hold the front warp beam and ratchet. Fantastic results. It isn't sticky or wet. Just brings out the shine and protects. (I've used it on cast iron treadle sewing machine bases before and other metal parts.) I'm so glad that I'm not going to have to paint them! At some point I might, but no need right now. For the wood parts, I use the fine steel wool and remove what's left of the varnish (not much) and smooth out all the little nicks and imperfections. Feels smooth as glass now. Follow that up with a rub down with Howard's Feed N Wax. For the heel rest and the beater bar, I'm using the Minwax Fast-drying polyurethane in the satin finish. I think this will hold up better to all the use with the polyurethane in it. I took a couple of harness chains off and threw them in a bowl of Coke. Have always heard about it, but never tried it. I'm interested in seeing if it does any good. If not, I might just replace them. Shiney chains look so cool! So far, everything is looking fantastic! I should be taking pics as I go, but I'm horrible at it and I really don't want to take the time. lol After all, everyone has seen dirt and rust, right? ;o) Connie

Michael White

Connie everything is going your way, great. Try using white vinegar, it is acetic acid. Pour the vinegar into a glass jar and drop in the chain. Time, depends on the amount of rust. rinse off with water. Try them both and let us know which works best.

Michael

andsewon (not verified)

Thanks Michael, I'll give it a try. I use white vinegar for all kinds of things. It's a great cleaner and will cut grease. Made great progress last night. (Stayed up till 3:30am! working on the loom.) I got all the lams and jacks dusted and cleaned and lubed every pivot point. There sure are a lot of them with 12 harnesses! Thankfully there wasn't much rust, but lots of built-up dirt/gunk. Everything works really smoothly now. I'm getting excited to get it done and move it upstairs.

Michael White

Connie, remember to lub the treadles were the metal rod runs through them. Also take a piece of sandpaper (or small flat file) and clean out the slot in the treadles.

Michael 

andsewon (not verified)

Thanks Michael. I forgot about lube for the treadles. How do I get in there? Do I have to take the metal bar out that they ride on? There are little round separators in between each treadle at the hinge. I did, however, take a nylon string and see-saw the treadle slots to get all the fuzz out of them. Well, I have no unbroken fingernails left, each one is black underneath, several bloody nicks and gouges, and a fair amount of tiny steel wool pieces embedded in my hands. Definitely having fun now!

sewwhatsports (not verified)

to see how beautiful this loom is going to be when you are done.  You are working so hard and I am sure that it will be fabulous.  Pictures please!!

Michael White

I don't like using steel wool, I use 3m pads (the green pads). Use a can of lube with one of the long plastic tubes to spray right into the treadles. If you have the time you could drive out the rod(I am certain it is rusted)When you put it back together put nylon washers between each treadle. Do you have the new lamm or the old ones with holes in them?

Michael 

andsewon (not verified)

Ok, treadles have been lubed! After I got in on it, I realized that I could, indeed, get enough sideways movement to get into each treadle pretty easily with the spray lube. No rust on the bar, thankfully, so it didn't take long at all. I have the old-style lamms with holes along the bottom.

Michael White

When you remove the old-style lamms you have to be certain when you put them back on that you lineup the slot in the treadle with a hole in the lamm. This is not nessary with the new style lamms.

Michael

andsewon (not verified)

Hi Michael, I'm not going to remove the lamms.....nosireee! I'm not THAT brave. ;o) These aren't rusted at all, so I'm good. I'm lucky that most of the rust has just been on the chains and frames. The wood parts are just really dirty--covered with a layer of 57 years of grime. There are splatters of what looks the same as when you spill a Coke and don't see all the splatters. After it dries, it leaves little brown spots. The wood has aged into a nice warm orangish color.

Michael White

I posted the instructions for people that will look at this group posting and  then know what they have to do when removing the treadles.

Michael

andsewon (not verified)

Good idea. One never knows when a treadle will have to be replaced from damage. Thanks for all your help, Michael!

Michael White

You have to remember that everything posted here will become history. Yes, I am answering your question: but days, weeks, years from now someone will be looking at this question and answer.

Michael

andsewon (not verified)

OOOH! We're making history! lol I feel so important! (I better watch my spelling...and grammar...oh the pressure!) LOL Seriously, though, I do hope these threads will be helpful for new Mac owners. That's one reason I've been trying to post my progress. Thanks Michael!

Michael White

When you get to be my age and working with a stroke handcap getting spelling and grammar is work. I have to check things like by for my & it for if etc. Sometimes I post, then have to go back and edit the posting.

Michael 

lindaspins (not verified)

I'd heard from a couple different lists that Howard's Feed & Wax was a good loom cleaning product--it is FANTASTIC. I used it on a little HD that had been poorly stored for years and it now glows. It even got the dried-up duct tape scunge off (previous owner didn't know how to fold the loom).  I used 0000 steel wool with it (very lightly) and it took care of the surface grime, then wiped down and polished out with a soft cloth.

I will be using it on my Mac one of these days--it really deserves it!

I found Howard's products at a hardware store but often see it at antique shops as well.

andsewon (not verified)

I couldn't agree more. I've used the Howard's products for years on my antique sewing machines. The Feed N Wax is wonderful on wood AND metal. The thin wax coating leaves a protective finish on metal parts which helps inhibits rust. I also use the #0000 fine steel wool to remove surface grime. The other great thing is that it helps to remove all the tiny flaws and ouchies that all wood equipment gets with use. If there is any loose varnish, it comes right off and then the Howards Feed N Wax can really go to work. I've also used some of their other products with stain in it and some polishing agents. My dining room table had gotten fine scratches in the high-gloss polyurethane finish over the years. The polishing agent did wonders and did not harm the finish. It is gorgeous once again! Like you, I see the Howard's products mostly at antique shops.

andsewon (not verified)

Today DH made me the new bottom support to replace the one that had broken at a knot. The board that he used was one that came with the loom, but didn't actually go to this loom. The gal that I bought it from said that the woman who owned it before her had three looms of the same kind. This board looked like a heel rest from a bigger Mac, probably a 48" loom. So, it was the right color and size. He just had to plane it to the right thickness and cut to length. Looks perfect! I also got the rest of the loom sanded and ready for the Howard's Feed N Wax. A few more chains to polish, a few harnesses to polish and aprons to make. (Background on the loom: It's sort of a sad story---the woman who owned the 3 Macombers passed away. Her children evidently didn't know anything about her looms, spinning wheels, fibers, etc. So, when they started cleaning out the estate, they started BURNING everything--Bags and bags of mohair fiber, bolts of linen cloth that this woman had woven and, I hope you're sitting down, two of the Macomber looms. Yep, two of them went up in flames. The lady who I bought this loom from was friends with one of the children of the deceased lady and when she heard what they were doing, she went there and got them to stop! They just gave her this loom. (Thank goodness!) She said she was able to save one bolt of the linen cloth. So, so sad. Eventually, they had an auction of all the stuff and there were loads of spinning wheels, a few looms, books of every sort imaginable, supplies, etc. I attended that auction and bought my little Dorset there. So many things were mismatched and pieces here and there. Now we know why. So sad. But at least some survived.)

Michael White

but I have seen this before. If you live in an area with very few weavers and your weaver family member died. Sometimes you have an estate sale. When  the sale is over what do you do with looms, yarn etc. that no one wanted? The last estate sale I want to had people buying yarn, a loom and I purchased all the books and mag, loom music and boxes of yarn. Cheryl was not with me at this time. When Cheryl returned from her business trip she was mad about me buying yarn (we have a ton) but loved the books. After pulling through the yarn she wanted more of the fine linen. So we want back (3 hour drive) for the last day of the sale. At this time I was able to purchase a truck (S-10) load of yarn, as much as I could load for $35. I ask them what was going to happen to the rest of the yarn. I was told it was going to the land fill. I contacted Phills of RM Yarns to see if she wanted the rest of the yarn. Cheryl picked out the books, mags she wanted. I offered the rest to my guild members then posted what was left online. I sold (gave them away for $5 each) them all within a week. I still get emails on estate sales. If anyone wants to get on this list for their area IM me.

andsewon (not verified)

Ok, been working on it for a full week and I’m almost done! I’m SO excited to get it going. It’s turning out great. I just have to finish cleaning up the rest of the harness frames and make the new aprons. I decided to go with the Minwax fast-drying Polyurethane (clear, satin) for a more-durable finish. This evening I finished up sanding/polishing the treadles from the backside of the loom at the rear hinge area. I had been dreading that with all the little pieces and so low to the ground. So, today I was looking around for something to block the loom up, and I came up with flower pots! lol We have a bunch of the heavy plastic flower pots. Turned them upside-down. Got DH to help me put the loom up on six of them. Works great! As soon as I get it upstairs, I’ll take some pretty pics!

andsewon (not verified)

Ok, I just realized that the previous owner had the beater assembly on backwards. (They even have the little homemade rubber bumper pads on the wrong side.) So what are the bumper pads supposed to look like and where are they attached? on the beater or on the castle? I really hate to order just this from Macomber. It's a $3 item for the pair and the shipping will probably be more than that. Anybody use something else?

Michael White

Connie, The pads go on the beater. The pads are there to keep the beater from hitting the castle upright. Since you have a Home depot near you go to the section with all the leg and table protectors, it is near the hardware section. You should be able to find something that will work. I will post a picture later today. The pads from Macomber are a small piece of the same pad used under the jacks.

Michael

andsewon (not verified)

Hummm........from the pics of newer Macomber looms that I was able to find on the net, it looks like a large square block of some kind. I'll look for the picture again and post the link. Thanks!

Michael White

Connie here are the pictures.

The picture thing is not working right now, will try posting later.

Michael

Michael White

Yes, that is a nice clean looking loom. Picture thing still not working. I don't see why you need the wooden block. I would just put on a pad were the beated hits the castle and see if it works. If it does. go for it. The picture is interesting, it has two pieces that I have but only knew what one of them did. Now I see where the other one goes.

Michael

andsewon (not verified)

Michael, What are the two pieces you're talking about? If you don't know what they're for, I'm betting a lot of us don't either! lol Connie

Michael White

The two pieces on the back are used when working with both beams. This picture shows a plain beam that is not in use. The upper standoff, the one with the u shape bracket, fits over the beam.(it is not in place) The bottom standoff keeps the yarn from the lower beam from touching the upper beam. This is the one that I did not know where it went.  

Michael White

Cheryl says you need the wooden block. Do you need a size?

 

andsewon (not verified)

Ahhh, I see what you're talking about. On mine, the warp separator is much simpler, but then I only have two back beams, both regular. If you look at that same picture, do you see all the holes in the side of the back beam upright support? (vertical piece) Mine has a ton of holes, too. Just wondering what they would be there for. What would attach there? In fact, a lot of the Macombers that I see on websites have these holes in the back beam uprights. ???? Inquiring minds and all that... Connie

andsewon (not verified)

Yes, thank you. I sorta thought the wooden block would be important when looking at the angle of the beater, etc. I'm guessing that Cheryl's have the block? And is the block attached with a screw with an adhesive backed bumper? Thanks so much! Connie

Michael White

I am going to have to see how it is attached and I will also get you a size.

Michael White

They all have the same number of holes. The holes are for mounting the brakes to different beams. if I remember right there are 8 different beams, a 3/4 yard sectional beam w/friction brake, w/ratch brake. a 1 yard sectional beam w/friction brake, w/ratch brake. A plain beam with both brakes and a metal beam with I guess both types of brakes.

andsewon (not verified)

Most excellent! Without the blocks, the beater goes so far forward that it hits the rods of the first harness. Not sure why the previous user would have preferred the beater the other direction. It was obviously used the correct way for some time because you can see where the bumpers used to be. Somebody moved them to the "back side" intentionally and turned the beater around. In doing this, you no longer have the wider shuttle race. Maybe they didn't like it for some reason. Mysteries....

sewwhatsports (not verified)

substitute material can I put on those bumper blocks to cushion on the end?  I have the original cushion on one block and nothing on the other.  I tied a piece of sponge onto the castle to protect it until I can figure what to put the bumper.

andsewon (not verified)

Rena, I read somewhere, maybe here, that weather stripping works well. Probably lots of things could be found at the hardware store. I love to go there. DH laughs at me because I rarely use the item for its intended purpose. lol

Michael White

As I told Connie above you can use anything, from a piece of rubber hose to glue on furniture protection cushions.

Michael

andsewon (not verified)

If you get the square, adhesive-backed furniture protection cushions, you could put 3 or 4 across the block to cover the full width. I use the little clear round ones on my little metal Structo looms to keep the beater from crashing into the castle.

Michael White

Connie, do you have the blocks? If not I can cut and drill you some out of maple. Just pay the shipping.

Michael

andsewon (not verified)

Hi Michael! I don't have them, but DH can make me some. I really do appreciate your offer, though. (DH has a wood supply that you would not believe---My father ran a sawmill for 30 years....... and DH rarely does anything with it, so this is good for him.) If you could send me the measurments of the blocks, that would be great. The depth is what I need the most. Thanks so much for all your help, Michael! Connie

Michael White

They are 3/4" x 1 3/4" x 1 3/4" with a hole drilled in the center.

Michael 

andsewon (not verified)

Thank you, thank you, thank you! I've decided to order the aprons from Macomber instead of making them. LOL A lady posted a pic (over on Warped Weavers on Ravelry) of her new ones she ordered from Macomber, and I really like the style. Plus, the canvas that I have is very heavy, and I'm not sure I'll like it. Back to the grindstone! I worked on cleaning up the rest of the frames today. It's been warmer here lately, so I might just paint them afterall. Those that weren't on the loom are in much rougher shape. The box they were in looks like it has gotten wet at the bottom, and that end does have more rust. Just need to get a new cable for the friction brake and some cable clamps and make the bumper blocks and that's it. (Unless I've missed something. grin)

Michael White

problem I am having with removing the rust from the frames is the paint in coming off. So I am removing all the old finish. Here is a picture of what I am working with. The lamms are very rusty.  

andsewon (not verified)

Hi Michael, Mine are mostly rusty at the corners and where the holes are to hang them from the chains. I'm sanding them smooth with a sandpaper block sponge (easier on the hands) and wiping them down with a cloth rag. Then I use the rust converter spray made by Rustoleum. It's in a spray can. Bought it at Lowes. It dries quickly and is a flat black finish. I can either leave them like this or go on to finish with a finish coat of paint. (I also bought a can of Rustoleum black in semi-gloss.) How are you removing the paint/rust? There are so many products. This is interesting.

andsewon (not verified)

I'm interested in knowing what the heddle bars look like when they come straight from Macomber. Are they silver? black? blued? I've heard mention of some mfgrs selling heddle bars that have a silver paint coating on them. I think this is what I have on mine. OR, a previous owner decided to spiffy them up and painted them---over the rust. While these LOOK ok, from a distance, they aren't slick and the heddles don't slide all that well. So, out came the sandpaper and wire brushes just to see what it will take to refurbish! This is the hardest that I've run into so far. It WILL come off, but I don't think my arms will hold out long enough to get 24 of them done! Since the heddle bars are 32" long, I dont' have anything that I can soak them in if I use a rust remover. Any ideas? Also, Michael, what type of blueing do you do? Same as for handguns? Connie

Michael White

Connie, Yes I am using gun blueing. It is a cold blueing, an acid with blue coloring. Since I have had two hand surgeries I use a lot of power tools to remove the rust. The bars were very heavy pitted. I use a surface grinder and hand file. Even with this the bars have small pitts in them, but the edges have been filed smooth. I apply the blueing (wearing gloves) then wash with water and apply a rust inhibiter. They are all done. On the frames I use a sanding pad that go onto a drill and a wirebrush that also goes on the drill. The same for the lamms. I can only work so long before my hands give out. When I get them down to the bare metal I prime them and paint them with black gloss enemel paint. The bars come from Macomber with a natural blue finish. The bars are heat treated tempered steel (spring steel) the heat treating causes the metal to turn blue.

You can make a container to hold your bars using PVC pipe. I would guess a 1", 1 1/4" pipe will hold all the bars. just glue a cap on one end and pour in the rust remover junk. I would guess you can use this stuff untill it all gone? Have fun

Michael

andsewon (not verified)

Well, this evening DH and I made a run to Home Depot. The cable for the friction brake was pretty ratty looking and they had cobbled together some strange metal hooks and covered the cable ends with black electrical tape. So, we found some nice cable clamps, new cable (which I found on clearance earlier today at Walmart!), and some new eye bolt screws. It looks SO nice now! And I needed to get a piece of chain for the regular brake. Well, I just couldn't stand it. The new chain is SO amazingly shiney! I broke down and bought enough to redo all the harness chains, too. lol yes, I know.......after all that work cleaning up the old ones.....my DH thinks I'm crazy and he might just be right. lol QUESTION: The new chain links are just a tiny bit larger than the old ones. Therefore, when I count out the same number of links of the new chain as the old chains, they're about 1/2 a link longer. Would it be better to make the overall chain length LONGER or SHORTER by that half-link amount? Michael, your idea on the pvc pipe for a soaking tube is working great. I put the heddles in there, poured in the Krud Kutter and it is bubbling up a brown brine to the top already. I'm so hoping that it does the job and I don't have to sand all that paint and rust off of them. Oh! I found the perfect material to use for bumpers! We searched the store over, and had nearly given up. (nothing was just right) On the way out the door, there was a rack with a packaged set of "Moving Men." You know, the little plastic discs that you put under furniture to make it slide easily? Well, the black rubber cushion in the center of the disks is PERFECT for making a beater bumper. Our old set of Moving Men is bright orange, cracked, and half are lost, so I got this new set and am going to rob one of the cushions. It is a very dense foam that feels almost like rubber. (I think I told you that what I buy is rarely used for its intended purpose. lol) Such fun! Yes, I must be wierd. How many other women go to Home Depot and have so much fun---it's like a treasure hunt! Connie
Submitted by Anonymous (not verified) on