This has probably already been done and is not exactly "equipment" but I am happy to report I have solved my issue of releasing the double pawls on the 63 inch wide Standard. This size loom has a ratchet and pawl on each side of the warp beam and on either side of the cloth beam.
It is not physically possible to lean over each side of the loom and release the pawls at the same time (a 6 foot span between side frames). I created a method using an eye hook under each side of the top beater castle. I had two pulleys on either side of the loom but only one release handle. I removed the handle and tied the end of the cord from the handle directly to the cloth beam pawl on either side. I then took an additional piece of cord, looped it around the cord closer to the front cloth beam pawl, this cord then travels through an eye hook and across the front of the loom to a second eye hook on the other side, then again attaches to the pulley cord closer to the cloth pawl.
Adjust the slack so that a gentle tug releases only the back two pawls on the warp beam, a firmer tug release all four pawls at the same time! Very simple.
See attached pics.
bloominloom-dawnmccarthy.blogspot.com
Comments