Hi all,

I was given a very old (1837) barn loom and have just brought it home (in pieces) today. I think it's absolutely beautiful, very primitive and seems to be in very good shape for it's age. I would love to be able to clean it before bringing it into the house and assembling it but I don't want to ruin the rustic appearance. I'm wondering if anyone here has any ideas on how to clean it? It's totally bare wood. I can get take some photos if it would help.

Thanks so much,

Robin

Comments

Sara von Tresckow

Use something dry - scrapers for caked dirt, vegetable brush or soft copper brush to dust it off. Then vacuum it.

If it is solid hardwood, some water with the scrub brush probably won't ruin it. That rough and rustic appearance just goes with the loom. In my eyes a well restored one is about the best loom out there.

And since I installed the Toika computer controlled dobby box on an existing loom, I'm thinking that those heavy old frames would lend themselves well to dobby conversion.

Alaire Rieffel (not verified)

 

A few months ago I brought home not one but 3 old looms, also in pieces and many odd mystery pieces of wood that "came with it" but don't seem to belong..  They were so dirty I couldn't bring them into the house until I washed them with soapy water and hosed them down.  This isn't necessarily trifling--someone in my DC Weavers group brought home an old loom with a hidden brown recluse spider, and suffered serious consequences from its bite.

Mine had been stored in a barn and/or garage on a dirt floor for decades, so they still needed considerably more scrubbing.  I carried them back outside for this.  I went over all the pieces with fine steel wool and Murphy's oil soap, jnot once but twice, just to get rid of the  layers of dark grunge.  One of them still looked dirty no matter what, and Michael White (who will soon have an article on this here) has suggested using trisodium phosphate (tsp) and if that doesn't work, mineral spirits or turpentine.  I haven't had a chance to try that, but hopefully it will work, since the only alternative I can think of is sanding.

I do recommend storing the pieces carefully--I have kept my major pieces laid flat with sticks between them and the floor so air can circulate in every direction.  I've also dried them asap so the water didn't have a chance to soak in--all this to avoid warping.

These three looms aren't barn looms, but I had a barn loom once, and a word of caution is in order: get a helper to help put it up!  Those timbers are  heavy and they go more or less higher than your head, so if one falls on you, it could be bad news.  We used a tourniquet type arrangement to stabilize the uprights so they didn't fall outwards from each other (a loop of rope tightened with a stick, the stick held in  place with cord) and ended up leaving it there (this wasn't in a museum, so appearance wasn't too important). 

Let us know what you end up doing!

rbratek (not verified)

Thank you so much to everyone for the suggestions. Luckily the loom isn't horribly dirty, just really dusty with some stains on it. I was wondering about Murphy's Oil Soap...heard of it but never used it on anything. Hubby suggested fine steel wool and then paste wax but I can't imagine trying to wax that thing. My arm almost fell off when I waxed a frame loom that he made for me.

Alaire, I certainly know what you mean about the weight of these things...I helped load the pieces into the truck. It was all heavy but the big log that you wind the warp on is unreal. It's a solid log  almost 5 feet long, it must weigh a hundred pounds.

Once it's cleaned I need to figure out how it goes together...since I'm a complete newbie to weaving I only know the bare minimum of loom construction. I think the frame would be fairly simple (using lots of online photos) but I can't get any clear pictures of the heddles and how they are attached. I'm guessing (by looking at photos) that the heddles were string?

I wish there was someone in my area that had some knowledge on this but I live in a very rural area and don't know a soul who knows anything about barn looms.

Any suggestions as to who I contact for some info? A website, a book or anything would be great.

Thanks so much

Sara von Tresckow

 1. Where do you live?

2. Since the old barn looms were always counterbalance - look in a weaving book that deals with counterbalance looms - Laila Lundell's "Big Book of Weaving" has many diagrams of how the parts of the loom are put together and how the shafts and treadles work together. The standard Swedish counterbalance loom is 90% similar to your barn loom.

3. The old counterbalance mechanisms were mostly just a beam across the top of the loom with pulleys for 2-shaft operation and a second set of pulleys or horses for 4-shaft operation. The beam across the top of the loom sits above where the shafts hang and was fastened there. There are a few variations in the tieup to the treadles, but all are fairly simple. The shafts were mostly two sticks held together by the string heddles.

If your loom was originally for only 2 shafts, it is not at all difficult to make a couple of mods, buy a few sticks and make it into a 4-shaft model - and no, you don't wreck its "authenticity".

Michael White

Robin, First off you need to know that you will never be able to remove all the stains with out sanding. DO NOT USE Murphy"s Oil Soap, unless you are going to use a oil finish. Murphy's Oil Soap will leave a oily residue that you can not remove. Also do not use anything that contains silicone. You can not put a lacquer, varnish, polyurethane or (most) paint finish on over silicone. That said, start cleaning your loom by first removing as much dirt and grim with a soft rag, brush and then vacuming.. Then you can wipe down the wood with a cloth moisten with mineral spirts. allow to air dry. Do not use water on bare wood it will raise the grain, can soften glue joints and the moist will cause the metal parts to rust. Again do not use TSP, trisodium Phosphate on bare wood, it works great on painted surfaces. what kind of finish are you planing to put on your loom?

Michael

rbratek (not verified)

Sara, I live in Northwest Pennsylvania between Erie and Pittsburgh. Thank you for the information about counterbalance looms. I will definitely try and find Laila Lundell's book...it sounds perfect.

Michael, The loom really isn't that dirty, just dusty with a few minor stains on it. I noticed the pencil marks are still visible where the builder marked the wood for the joints...pretty cool.

I'm not sure about the finish. I DON'T want to change the color or the rustic appearance of the loom. Polyurethane or any kind of modern finish is out of the question. I've always heard that wood needs to be "fed" or conditioned to prevent it from drying out too much. Since I'm bringing it inside where it's heated, do I need to put some kind of finish on it to keep it from drying out further? I'm very lucky that it's in such great shape, there's no rot or insect damage at all. Your suggestions are greatly appreciated, thanks.

Michael White

Hi, If you live in the NW PA and you are bring the loom into your "heated" home you will need to put on a finish or your wood will dry out and crack. Your best bet would be a "clear" tung or danish oil. It says clear, but it is still going to darken the wood a little. If you go with one of the oils first mix about a 1/4 of the can with a equal amount of mineral spirits for greater penetration into the wood. Try it in a out of the way place to see if you like the finish. It will take at less three coats on your old dry wood for a good finish. Then once a year you can reapply the oil. If the finish is dirty a light rubbing with mineral spirits would be in order before applying that annual coat. Take some before and after pictures for all of us to see. Remember to wear rubber gloves to protect your hands, have good ventation. Your  rags are flammable. so do not use near any flame or pilot light and no not smoke. Dispose of your gloves and used rags outside in a metal can or put them in water.

Michael

rbratek (not verified)

Michael,

I went out and bought the mineral spirits today and started brushing and vacuuming some of the pieces. Is boiled Linseed oil as good as Tung or Danish oil? I ask because my father in law has a brand new can of it and offered it to me for the loom, but I will use whatever is best.

I'll be sure to take lots of pictures. Thanks so much for your continued help.

Robin

Michael White

Robin, "Boiled Linseed Oil"(Flax Seed Oil) will work, DO NOT USE plain Linseed Oil it will take a year to dry! You can cut the Boiled Linseed oil the same way. JUST REMEMBER YOUR RAGS CAN HAVE SPONTANEOUS COMBUSTION. WASH THE USED RAGS OR PUT THEM IN WATER. NOT NOT STORE THEM IN YOUR HOUSE!!!! You can still wipe down the loom with a damp mineral spirits rag before applying the linseed oil. NOTE, MINERAL SPIRITS RAG ALSO CAN COMBUST.

Michael

rbratek (not verified)

Thank you Michael for all your help. I will do as you say and keep the used rags in a bucket of water until  I wash them.

I've taken a few photos of the loom as it is now, stacked in pieces on my porch. There are also a few items that I know are not loom pieces...something that may be a warping board and a huge thing that folds...possibly a quilt rack. I'll include the photo of the folding rack, maybe someone here will know for sure what the heck it is. The other piece is hiding behind the loom, its a frame with long skinny pegs of some sort.

Photos are here: http://smg.photobucket.com/albums/v366/rbratek/Barn%20loom/

Michael White

Robin, are you going to be able to get that "barn" loom into your house? The piece with the pegs looks like a tube holder for sectional beaming or feeding the warping board? It looks like you have a lot of work to do, but when you are done you will have a great loom.

Michael

Michael White

Robin, that folding thing does look like a quilting rack. The long piece laying next to the thing with pegs looks like a raddle? I did not see any heddle frames?

Michael

rbratek (not verified)

There is a bundle of "sticks" that I'm guessing is the heddle pieces. I'll bring them in and get some pictures of them spread out. This loom will have a room to itself, about 14'x14'. I'm hoping that's big enough...if not, I'm in trouble!

What the heck is a raddle? See, I told you I was a newbie : )

Michael White

Laverne, Robin, A barn loom was not always kept in a barn. The loom was build the way old barns were made, with pegs and not nails or screws and sometimes they where made out of the heavy timbers that were left over from making a barn.. The looms were taken apart and moved from family member to family over great distances. The loom was taken apart and storred untill the spinners had made enough yarn to weave. Most times the weaving was done in the winter months when there was little farm work to be done by the men. Yes, most weaver back then were men. The ladies did the spinning.  A loom was and is still a big investment. Depending on the type of loom you could make rugs, cloth for clothing and even coverlets. Cheryl (my wife) and I at one time did a lot of work on old historic looms for the state of Georgia. I would made repairs to the looms and Cheryl would teach the historic interpreters how to weave on their looms. Cheryl still does demonstrations from time to time. You can see her here weaving on a loom I made her (a copy of a Harrisville 22 inch loom) by candle light, Kerosene lamp and a fire place. Most of the light in the room came from my flash.

  http://www.handweaver.us/Callaway%20Plantation.htm

Robin, you need to get a good weaving book. A raddle is used to separate the yarn groups when dressing the loom. please look at warping a loom from back to front here in this section of Weavolution. On your loom the heddles would have been string. When you are ready I will send you information on making string heddles.

Michael

bolivian warmi

Thank you Michael,

Shortly after asking the question here I decided I should not be lazy and went and googled it  and there is A LOT of information out there on it. Thank you for your nice concise explanation. I love all those activities with historical reenactments-I can't imagine doing all that work by candlelight and lamp and carting that loom all over the countryside.

Much appreciated,

Laverne

 

Sara von Tresckow

Just FYI - in German, a loom found on a farm is known as a "Bauernwebstuhl" or farm loom. I have seen books in other European languages that use this German term for the old solid frame looms.

It isalso a very plausible thought that back in the day of the old PA German weavers that one of them went to a Yankee woodworker and ordered one of those "Bauern" looms. Thus creating the "barn loom".

Sara von Tresckow

I love boiled linseed for wood finishing, but my recipe comes from Earl Proulx - the old woodworking advisor to Yankee Magazine - who specified that the linseed be mixed 50/50 with REAL turpentine so that the oil was thinner, would seep into the cracks in the woodf more effectively and cure in about 2 weeks. For cleaning at the same time, he recommended 10% white vinegar added to the mixture. With just the boiled linseed, you can wait forever and it is still tacky.

Another favorite - Skidmore's beeswax finish (made in Wyoming) is also 50/50 wax and turpentine for similar reasons.

NOTE: use only the REAL turpentine made from pitch pine.

periwinkle (not verified)

Hi Robin, 

I have been weaving with barn looms for nearly 25 years, having trained with Norman Kennedy and Kate Smith.  Your barn loom just really needs a good vacuuming, a bit of sponging off with a damp sponge ( I agree : no murphys) ) and then dried out. They all check with age. The linseed oil diluted is a good idea too, if you are up for it.  I have a 1795 loom that is checked and cracked and has bug damage even, but it weaves like the old master it is. I've woven everything from 40/2's linen on it to blankets.  I use either two or four shafts depending on the project. When you are ready to put it together, look on the ends of the pieces for the roman numerals that should be present. Match them up with each other ie; IV with IV  etc, and you will have your loom put together in no time. Use a rubber mallet to bang the pieces together.Two really important tools in my tool kit are my rubber mallet and a carpenters level.   You are welcome to ask me any questions you need to. Also Kate Smith at Eaton Hill Textile Works is a great resource, she's got 8 or 9 of these looms in continuous use.

 

Looking forward to hearing about your progress

 

Phyllis Detwiler

Periwinkle Handwovens

Cape Cod, MA

bolivian warmi

Thank you Sara. It gets more and more interesting. I didn't read THAT piece of information on google. I hope I get to see one of these looms when I go the US.

Michael White

Hi Robin, looks like you are getting lots of advise. Now if we could get all the people together we could have a "Barn Loom Raising." Like Sara said you could use pure turpentine but it would add more (amber) color, a lot of the gum turpentine produced in the US comes from South Georgia. It is going to take a lot of oil and elbow grease to restore that old loom. This loom is not a small frame loom. As Phyllis said above you could just wipe it down, put it together and enjoy weaving on it. I sent you a IM listing all the weaving guilds in PA & OH I am should there is someone near you that has a barn loom or just a loom with experience to help you.

Michael 

Sara von Tresckow

 Michael,

I did NOT recommend pure turpentine. Please read more carefully.

I recommended 50% BOILED LINSEED, 50% REAL TURPENTINE.

That is something VERY different - and I really don't enjoy being misquoted.

Michael White

Sara, I am not going to get into a augument with you. I did not "misquote" you, you can say I corrected you. First off you can not go into a hardware store and buy a product saying "real" turpentine, you can buy (I have a gal can sitting here) pure gum turpentine which is as "real" as it gets. You can also buy spirit Turpentine, oil of Turpentine, distilled turpentine and medical grade turpentine. Distilled turpentine is clear and expensive. And yes in some art shops it may be marketed as "real" turpentine. If you would like to know how turpentine is producted and see pictures of trees being tap for it's gum I can suppy them. As I said Georgia is the leading producer of "Pure Gum Turpentine." Even if you cut the turpentine 50% you are still going to add color, which is something Robin did not want. Sara, in the future do not be so quick to take offend.

Michael

Sara von Tresckow

 Michael, I merely said "real" to keep people from buying paint thinner/brush cleaner from petroleum distillates which is what the "Terpentinersatz" is which is NOT made from pine trees and isn't recommended to mix with the linseed. Both are on the same shelf at the hardware store.

And again, the recipe is for using BOTH boiled linseed and turpentine - not just the turpentine.

As for the turpentine variants - you are being a bit nit picky . My only point was that thinner cures the linseed faster and assures that it penetrates the wood better. As for coloration, the user must decide whether or not a sight color variation is important or not. The finish is to seal and protect the wood. Personally, if it were my loom, I'd just vacuum it and leave it raw and watch it carefully.

An old, dirty loom won't show the linseed finish much anyway - the wood in the picture is pretty dark already.

Michael White

You are right. Looking at the size of that loom, it would take a lot of oil, time and a considerable amount of elbow grease. I to would just give it a good cleaning then have fun putting it together and weaving on it.

Michael

rbratek (not verified)

Everyone, thanks for all the advice on the old barn loom. I actually had it cleaned with mineral spirits and conditioned with boiled linseed oil about two weeks after my last post but I've been so busy I haven't had time to post about it. I actually put the whole thing together by myself except for the incredibly heavy warp beam, which is a solid log. I can't tell you how impressed I am with this beauty...I love it. I was going to start researching more about barn looms and contact the lady in Maine who offered to help but I found out about a Newcomb Studio Art loom in my area for $50. and I just couldn't pass it up. It was really dirty but I gave it the same treatment as the barn loom and it looks great. I've started another post about the pulleys and how to tie up the harnesses...hopefully someone here has this loom or similar and can help me. I haven't gotten a photo of the Studio loom yet...I just ordered a new reed and wire heddles for it. I'll get a few photos to post once the parts come and I get it together.

Here's some photos of the barn loom...I still have to oil the warp beam.

Sara von Tresckow

 Nice job - hope you enjoy weaving on it.

Michael White

The loom looks great, I too hope you enjoy weaving on it. I posted to your studio loom question, Cheryl has had a 45 inch Newcomb Studio loom for 30 years.

Michael

Joanne Hall

What a beauty.  It looks like a very nice loom.  If you send me your email address, I will send you a one page information sheet about tying up a counterbalance loom.

Joanne

[email protected]

rbratek (not verified)

Just sent my email address to you Joanne, thank you so much for your help!

Robin

 

Michael White

Robin and I have gotten to the stage where she is going to make the string heddles. Her question to me is, "what size to make the heddle?" Any help out there? I am thinking she can make 4 samples at 12 inch and just see how the loom works? Sara, I need your help?

Michael

 

debmcclintock

 Tie a string from the back beam to the front beam and see where it passes thru the shafts and thru the reed.  See if you can figure where the sweet spot on the beater fell line will be....that might help figure the heddle and shaft positions.

Sara von Tresckow

The heddles need to be long enough to form a good shed. If they are too short, when the shed is opened, the warps are hampered in their rise by hitting the top of the lowered shaft frames.

Add to this that at some point Robin may wish to switch to Texsolv heddles or purchase some to mix with the string heddles, it would be a good idea to mimic a standard Texsolv heddle size.

280mm heddle length with 12mm heddle eyes would be the smaller size to use.

310mm heddle length with 12mm heddle eyes would by my personal preference. I've used this size on my Finnish countermarche looms for years - it is a bit more generous than the 280/12 and since the barn loom frame is very generous, they would produce a generous shed. (310mm is just over 12 inches).

Don't let the metric sizes be a hindrance - once the jig is made, it is just a question of knotting the heddles and putting them on the shaft frames.

Also, do use only the finest quality seine twine for the heddles so that it is worth the effort of hand tying them.

Michael White

Ok I know the string needs to go from the back beam to the front beam with the eye of the heddle centered on the reed. I guess it would be easy if I was not 500 miles away. I will talk to Robin and will start with a 12 inch heddle. Texsolv would be the way to go, but I think Robin really wants to do it the old way.

Thanks,

Michael

reginag (not verified)

This post has been deleted by claudia

kellytwo (not verified)

I just acquired a barn loom that was rescued from a barn in Potsdam NY. It's disassembled, but appears to have all of the pieces and, in my opinion is in very good condition. Of course the string heddles are rotted, but the rest of the wood seems to be very solid, with only a few repairs to be made. One side of the beater up-rights is broke, which looks to be an easy fix, and the post on one side of the warp beam is broke too. 

I resurrected this post because there was a lot of discussion about the best way to preserve the wood which I'm very interested in. I would like to darken the wood along with doing what's best to preserve it. It will live in my new studio in the barn, on a wood floor, with no heat. I live in the north east US near Buffalo. The wood is very clean, because the girl who had it for the last few years already cleaned it and kept it in her house. Your advice to rbratek was for not changing the color, but I think this loom would look nice dark. What do you think I should put on it?

I would love to know any information about barn looms. I've never had one, and the girl I got it from said she was told that the style is more French Canadian than American. Since Potsdam is right near the Canadian border this probably sounds right. Is there a way to know about how old it is?

These are pictures of when it was originally taken out of the barn.

Doreen

Michael White

lots of work. But when you are done you will have a great looking loom. If you want a dark brown color I would used "Dark Danish Oil". Being an oil it will feed the wood and keep it from drying out.  I cann't tell from the picture what the condition of the wood is. So you will have to decide if the pieces need sanding. You can following the directions on the can. I would go for at less 3 coats. Just remember to wear gloves and to place all your used rugs in a pail of water. read all the notes above. When you are ready to make the repairs let me know and I will give you a few pointers.

Michael

kellytwo (not verified)

Should I use the danish oil after it's put together? I'm worried about the wood swelling when the oil soaks in, and thought that maybe if it's put together first the swelling will be a good thing to keep the joints tight. Right now the humidity is very low because of winter, but as the summer approaches the humidity will go way up. 

Doreen

Michael White

before puting it together. The oil will not cause the wood to swell. Do not wash the loom with anything containing water.You could cut the oil with a paint thinner for the first coat. I know all about NY I managed a dairy farm south of Rochester. Why do you think I am living in Georgia, it was 75f here today.

Michael White

on this St, Patties. That was done in my best Irish brogue.

Michael

kellytwo (not verified)

Thank you so much for your help. The pictures make the loom look much worse than it is. Even though it was taken out of a barn, I don't think it lived its life in the barn, at least not on a dirt floor. The bottom of the legs are like new, with no moisture rot at all. I don't think it needs any sanding, and I can still see the scratch marks that were made to measure where the holes are cut for the joints. I'm not sure how the brake works for the warp beam yet. There are a few pieces that I'm not sure what they are. I can't wait to oil it!!  I think I want to make new string heddles, and in the previous posts you were going to give Robin instructions on how to make them. Can you help me too?

You must have lived very close to me. I'm in West Seneca, just south of Buffalo. Today was a beautiful day of 58 degrees. I know we'll still get some snow, but Spring is on it's way.

Michael White

in Holcomb, NY it was just a hole in the wall. I have seen it snow in May so you have a few months of weather to go. If you go to the top of the page to the search and type in "string heddles" in quotation marks you will find what you need.

Stay warm, (g)

Michael

kellytwo (not verified)

Thank you Michael, I'll look at that.

Doreen

kellytwo (not verified)

Our temperature is back down to the lower 40's today. Is this too cold to apply the danish oil? I suppose I can control my excitement and wait for a warmer day if need be.

Also, in the second picture, leaning against the door, next to the shafts, is a piece of wood with a U cut out of the top and holes down the center. I'm not sure what this piece is. Do you think it's part of the brake for the warp beam?  I can't figure out how a brake would work on that beam.

Doreen

Michael White

http://www.rustoleum.com/CBGProduct.asp?pid=46

http://www.wwch.org/Technique/Finishes/OilFin.htm

Applying temperture? Check the label and see what the manf says. Applying the oil warm will give you better penetration. In a finishing shop we would heat the oil before applying. Because of fire I would not recomment this for the home owner.

I don't know what this part is. Can you ID the overhead beater.

The brakeing system. Every loom is different. You are just going to figure  this out as you put this loom together.

kellytwo (not verified)

I'll check the manufactures guidelines for the temperature to apply the oil. 

The overhead beater is on it's side (with the broken upright piece) next to the un-known thing. I can identify everything except a few pieces, and this one with the holes is one of them. When I'm ready to put it together I'll take a close up picture of it and see if anyone knows what it may be, and how the brake might work. 

Thank you for your kind help.

Doreen

steve104c (not verified)

rbratek, I refinished my Glimakra with shellac, It's easy to apply and dries fast. It won't change the wood color very much. It will seal and stabilize the wood to help it from expanding and shrinking. It's a natural fininsh....Steve.

Chillybuttes

I have a 250 years old barn loom. Great wonder of a loom. I use 13 inch texsolv heddles to make shafts with two sticks. In the end we used texsolv tie-ups as well. You can add lambs for easier weaving. I like mine best for plain weave with two shafts.

Barbara Keyser (not verified)

RBartek  I grew up near Pittsburgh & have family all around there.  I know there is a BIG weaving guild in Pittsburgh itself.  Also IUP (Indiana Univ of PA) has a weaving studio in their art dept.  Contact them for info and to see if any contacts closer to you -sure someone else in that large area also weaves.  Good Luck

2BobbieJ

 

I just happened upon your informative exchange. I, too, have just acquired a lovely old loom and have no prior weaving knowledge. There are pieces that I don't recognize from pictures, resources, etc.-like the threaded piece resembing a candle that's lying on the floor? I think the object in the second photo holds the treadles when turned upside down? I'll certainly check out the reference book mentioned in earlier postings for hints on assembly. How can I tell if this is a handmade loom vs manufactured? There are what appear to be metal pieces that look like thread guides on some of the wooden pieces-I'll try to include a photo. I can't imagine someone just making those and them not being manufactured? And I wonder how old it is? It truly is a lovely piece and I can't wait to figure it all out. Thanks for any guidance.

Submitted by Anonymous (not verified) on