I hope someone can help me.  I am eager to weave with rags in the style of those on the Crazy as a Loom website.  She does beautiful work.  I purchased the Rag Rug Handbook by Meany and Pfaff, and there is only one pattern for a 10 dent reed (I'll be using a rigid heddle) and that one uses loopers, not fabric.  I have 8/2 rug warp and cotton quilting fabric.  Can anyone tell me what sett would work and with what width of fabric strips?  I have experimented with a sett of 10 and fabric from 1-2 inches in width, but it seems that the warp is too close together and I haven't figured out how to keep the unfinished edges of the fabric from being so obvious.  I have tried 1/2" fabric and that just bunched up and looked terrible.  Should I give up?  This is really getting me down.  Thank you in advance!

Comments

Caroline (not verified)

Hi, please don't give up, it just means looking at this in a different way. RH looms weren't really meant to weave rag rugs on,but there has been discussion on the Rigid Heddlers group:

www.weavolution.com/node/4536

This is not the thread you started. but another one, and there are several posters there who used different techniques, and share their methods.

I have read recently that with some fabrics it might be better to use 2 thin strips instead of one thicker one. You may also need to find a thinner warp, or else adjust the spacing down to  6 or 5 by skipping  the odd slot and eye, while maintaining the slot/eye sequence.  I would also be tempted NOT to use the RH as a beater, just use it to space the warp and form the sheds, and use a sword and/or a heavy rug comb instead. I suspect its rather a case of experimenting and sampling until you get the right mix, without putting too much stress on the frame of the loom.

Good luck - just because our RH looms are not meant to be used for rugs does not mean they can't be with a spot of lateral thinking! :-)!


francorios (not verified)

Mini-rug 12"X23" made from denim rag strips, handwoven on Erica rigid heddle loom

I did a sample rug on a 10 dent RH with the warp skipping every other eye-slot, for an effective 5 dent warp. It was thread eye-thread slot, skip eye-skip slot, thread eye-thread slot, skip eye-skip slot,and so on. It looks funny on the loom but the warp spread out as I did the weaving.

I did use the heddle as a beater, but I did not know any better. I could have cracked the plastic heddle on a 30 year old loom!

So use a wooden beater/sword on your rag warp, or at least use the side of a wooden stick shuttle, not the heddle, to beat a rug warp.

Have a good day!

Franco Rios

eggplantlady (not verified)

Thank you both!  I thought that with the fresh morning sun tomorrow I would try skipping every other slot/dent for a 5 dent warp.  Now I know this is worth trying.  I have already cut some denim at 1" and will experiment with other widths too.  I never thought of the potential for damage to my plastic heddle, so once again, the collective experience of this wonderful site paid off!

eggplantlady (not verified)

With smug satisfaction I gazed proudly at my new warp this morning...really, the best job I have done thus far.  It would have been perfect if I had remembered to skip every other slot/eye!!!  I am now contemplating whether it is feasible to remove the warp from every other slot/eye or just weave something else.  No chance for a swelled head here!

eggplantlady (not verified)

With smug satisfaction I gazed proudly at my new warp this morning...really, the best job I have done thus far.  It would have been perfect if I had remembered to skip every other slot/eye!!!  I am now contemplating whether it is feasible to remove the warp from every other slot/eye or just weave something else.  No chance for a swelled head here!

francorios (not verified)

If you have another project on the list that would work with that warp spacing, put it on. The rag rug can wait.

Have a good day!

crosstownshuttler (not verified)

If you don't want the raw edges of the rags to show, there is a gadget for folding fabric strips when making braided rugs so there are no raw edges. You just run the fabric strips through the device as you wind onto a shuttle. See this site:

http://www.earthguild.com/products/rug/rugbraid.htm

Carie

Submitted by Anonymous (not verified) on