Dear Inkle weavers,

I'm interested in any sort of practical or philosophical reflections you might have on making string heddles for your inkle loom.  I have a Gilmore inkle loom circa 1973 or so--it's just like the one pictured in the Harriet Tidball book (a classic from the same era), with a split heddle peg and a paddle on the back to act as the tensioner.

The heddle peg was outfitted with continuous string heddles that seem similar to Tidball's (but the book is pretty terse on this point), but perhaps not exactly the same:  it appears that the cord goes around the peg, through the slot, forms the heddle and then is attached with a half-hitch.  This was done with a fine nylon cord that slipping out of the half-hitches.  I've been trying to figure out how to fix the heddles, but I think it's probably best to take it apart and start over.  In linen, I think.

So here's the question:  are there advantages to continuous heddles vs. those that are made one by one?  For instance, I've watched Jane Patrick's video (on YouTube or the Handwoven website) in which she measures out loops one by one and then doubles them over to create heddles.  That seems much simpler than trying to recreate the continuous heddles but I wonder if there are pros and cons to each method?  Maybe I could fit more heddles on the loom if they're continuous?  (There are about 100 now.)

I'm interested in any ideas you might have.  I'm a fairly new weaver and fortunately/unfortunately I inherited my weaving equipment.  I've enjoyed learning to use it and want to do more, but I wish my mother were around to ask...

Thanks and best wishes,

Carolyn (Mokhajava)

Comments

bolivian warmi

Hi Carolyn,

I don't own an inkle loom but I weave on a backstrap loom and use continuous string heddles all the time. I don't know if my way of making them will work on the inkle loom but I wrote an article for the online magazine WeaveZine recently which has a video segment on making continuous string heddles. The video is also on Youtube here..........

www.youtube.com/watch

I have step by step photos of the process on my Flikr page if you prefer........

www.flickr.com/photos/39560980@N05/sets/72157621462362178/

I don't use nylon-slips around too much-hate the stuff for heddles! As for continuous over one-by-one...at least on a backstrap loom, continuous hands down-way faster to make and easier to get all the same length-no knotting required.

Laverne

Loominaria (not verified)

It's just a matter of when you want to invest the time. If you plan to stay with inkle weaving for awhile, the time spent up front to make individual heddles will save you time in the long run.

Kurt

maryv (not verified)

I've never done the continuous heddles, myself, but I've seen them. I guess the plus side is that you control the distance to the heddle peg dynamically ... maybe even options about multiple "levels" of heddles. The downside seems like they're a little fiddley (at least, at first). I've usually made a bunch of single heddles, but my newest loom makes this a little difficult. I can usually find some peg-pair to get the right length, but (alas!) no such luck. I made a bunch, but I'm sure I'll need more and will have to deconstruct what I did before.

debmcclintock

 Here are some links to photos I took of Lao and Cambodian making their continuous heddles.  Their practice is to use jigs that keep all the heddles the same size and that slide thru the heddles as they progress across the warp.  I have made my heddles before this way and once you figure out how to handle the jig it works well.  I've used a cedar square with a hole drilled in it for my finger to hold it steady. 

The first link is from Vientiane, Laos, look at the 2nd row of photos, all the way to the right

homepage.mac.com/debmcclintock/PhotoAlbum18.html

The second link is from Siem Reap, Cambodia, look at the 4th row from the bottom middle photo

homepage.mac.com/debmcclintock/PhotoAlbum40.html

Both use baby powder or talc to slide the jig and their dowel rod thru the heddles as they are constructed

Both are constructing heddles for a frame loom which has a top and a bottom.  They construct the jig for the top part of the warp and then flip their dummy heddles or warp beam and construct the bottom portion of the heddles with clasped heddle form.  They pass their heddle string all the way thru the first line of heddles and then pull it up around each thread as they knot it.

Don't forget that you can always tie on another warp and pull thru the heddles once you've ready to start a new project.

happy heddling  Deb

ps, I forgot to mention that these weavers are usually weaving 60 - 90 ends per inch so they use nylon thread for their heddles in order to have the spacing properly.  Over in Laos you can go to a fishing store and buy different size nylon that works for different setts.  I use kite line that I've bought here and have also used Maysville warp, it holds up well under stress.

 

 

 

Submitted by Anonymous (not verified) on