The Sept 09 Rigid Heddle Beginner Project begins on Monday Sept 28 2009   This message thread will be the site for instructions, questions and, hopefully, answers.  

 

Comments

sandeleh (not verified)

Hi, Franco - thanks for the sympathy!  I really dislike going into the big box hardware stores cuz the clerks seem to think old women don't know anything about anything.  While that may be true,  I just want to buy what I want to buy and not be sneered at.  :)

When I first started weaving back in 2000, the dowels I bought were perfect - close-grained, smooth and straight.  All I had to do was cut them into the lengths I wanted with pruning shears and start weaving. Oh well, the dowels I bought yesterday are ready to be cut so no sense complaining.

I had to dig a bit to unearth the Handicrafter cottons that I remembered.  Around here it's like the desert - older things get covered over by newer things and just disappear.  I found that I bought 2 large balls of the "holiday print," the white yarn with color splotches,  and 2 big balls of the "Holiday twist" where each ply is a different color, green, white and red.  I also have the 2 cones of "mistletoe," red, green and white variegated cotton from Peaches and creme.  I've used that before and not had any problems with it bleeding.  I'm thinking if I use the Bernat print with any other yarn that has more solid colors, it wont matter too much if the red does bleed, as it will be camoflagued by the other yarn.  Looking closely at the outside of the Print ball, I dont see any globs of color, so perhaps the bleeding on this ball wont be too bad.  One can always hope!

I have not used any cotton yarn for a few years, since I quit teaching at the library.  I had a learn-to-knit class that went on for a few years where I used cotton wash/face cloths as the teaching medium.  I used up a lot of cotton yarns then but I confess I didnt buy too much Handicrafter as the balls were smaller and more expensive than the cotton yarn at wal-mart.  I used only my hand-knit cotton wash cloths for a few years, then they all got hard so I went back to regular store-bought terry cloth. 

I need to get over to your blog so I can see your towels closer up.  :)  I've woven with a lot of variegated acrylic in my scarves and I just love the random plaids the yarns make.

Sande in Fresno, CA

francorios (not verified)

Hello Kiandra,

Good plan. Put that TV time to work!

Have a good day!

francorios (not verified)

 
 
More cotton yarn info:
 
Home of Peaches & Creme yarn,
USA milled from USA grown cotton
 
Home of Sugar and Cream yarn
Milled in Canada from USA grown cotton
 
It's amazing what they can do with a little cotton and some dye!
 
Have a good day!
 
 

sandeleh (not verified)

Hey, Franco!

I love turq and purple and was delighted to find this big ball (12 oz) of "Crown Jewels."  Even better it was on sale so I savee about $2 over regular price.   I may make a towel like yours (worsted wt for both weft and warp) or I may use a size 10 cotton for warp and this worsted wt for weft only.  I have a whole back room with wall to wall bookcases stuffed full of 8/2, 10/2 and other "real" weaving cottons and wools.

 

Also at Joann's I saw the Red Heart Holiday yarns - red, green and white with gold or silver metallic ply, but passed them up.  I have to stop buying yarn cuz I can make stuff with it and start to actually sell some of the stuff!  :)

Sande in Fresno, CA

PattyAnne (not verified)

Thanks Franco.

BTW, if anyone is having trouble uploading image to this thread (or any Weavolution threads) I've made a video showing how to do it here:  http://www.youtube.com/watch?v=bXZf7N1sdh8

If you have suggestions for other videos you think would be helpful, please PM me and I'll try to do them!

PattyAnne

francorios (not verified)

 

hot stripe towels finished 1

Here is the hot stripe towels after wet finishing, wash/dry.
Size after finishing is 14 inch by 21 inch.

francorios (not verified)

 
 
So using a stick tied to a chair for resistance, I'm starting to wind this warp onto the loom. It's not a big warp so I don't need a big work table to do this. This view is from the warp beam side.

 

 

Here it is after winding on. Notice the brown paper I wrapped around the warp beam as I was winding. I will be weaving from the other side.
 
The white warp is peaches and creme white, the stripes are Sugar and Cream "Playtime" which is pink, orange, yellow, it reminds me of rainbow sherbert.
 
 

francorios (not verified)

Here is my little row of knots. I tied about 4 at a time or every 1/2 inch.

 

I am using tubes from paper towels to cover the knots for a smoother winding. The tubes are cut along one side.
 

Here is the first wrap before I start weaving. I did get a smoother start for winding, but now a bunch of my warps are crossed.
 
 
Using my finger I chase any crossed warps and will straighten them out.
 

 

Here I chase the crossed warp to the beam. Not only to do I do this on this side of the heddle, it has to be done above the heddle. If there are crossed warps above the heddle, I won't get a clear shed opening.

 

 

francorios (not verified)

I started the weaving with 4 rows of waste yarn to set my spacing. I used the straight angle instead of smiles or bows or bubbles. I have also been trying to beat on a closed shed, which seems to help.
 
 
I try to measure a lot. I'm still a beginner on all this weaving stuff. I warped for 16 inch but the piece wants to go smaller, I'm finding I can hold it at 15 and a half inches wide.
 
 
To measure for length, I'm using measuring strings. The curled string in upper left has two knots 26 inch apart. I tied one end to the side at the cardboard separator and I'll keep weaving until I get to the other knot. If you look down at the pink stripe you'll see a string coming up and there is a knot where my weaving ends at the separator. That was the measuring string from the beginning to the end of the first towel.
 
I gotta finish this weaving.
 
Have a good day!

Ariaya (not verified)

 Well .. unfortunately the time I thought I had got away with me. . I won't have a chance until Saturday to start my dishtowels. .. I hope that's okay.

francorios (not verified)

Not a problem, there is not a rigid schedule here. You can jump in when get the chance.
I was expecting people to join in at intervals anyway.
Have a good day!
Franco Rios

francorios (not verified)

Great find on that turq and purp yarn. I'm still mad at Bernat, but I might be persuaded to try them again.
 
On my birthday, family members gave me gift cards to craft shops, so I have a bunch of yarns I picked up on sales and clearance. Not to mention the odds and ends I pick up at the thrift stores.
 
I need to do more weaving too to use up the stash.
 
Have a good day!

sandeleh (not verified)

Hi, PattyAnne

That was a great video and your dog Buddy is cute! 

Since you have added some Weavo-Help here, I wanted to ask another question:  Is there anyway to jump over the posts one has already read to catch only the new ones?  Every time I log on and choose my forums, I am put at the very first post for any of the threads I choose.   There has to be a better way, but I cant seem to find it.

Any help would be appreciated.  (I do have the auto-notify on, so I am emailed when I get a response to any of my posts).

Sande in Fresno, CA

 

PattyAnne (not verified)

Hey Franco,

 

I don't think I understand how the cardboard separator works.  If you tie the string to it, do you wind the cardboard on?

I love the idea of having a string so I can keep track of the length I've woven but am not quite understanding.

francorios (not verified)

It's 2 different things. The cardboard separator is to make an end of one towel and make a gap for the fringe.

The measuring string is tied to the last warp string and just hangs loose from the loom and follows as cloth is wound on the beam.

Did that make sense? Let me know. If I'm creating confusion then I am not doing this right.

Have a good day!

Ariaya (not verified)

 Oh cool thanks!  I'm looking forward to getting started and getting weaving!

francorios (not verified)

 
*continuing to weave along*
 
Here I have woven up to the marking knot of my measuring string. Just in time because you see I am at the end of the warp which is tied to the beam at the other side of the heddle. So now I am hand hemming the end of the towel.
 
My fringe has three ends per group. I have 128 ends divide by three is 42 groups plus 2 extra ends. So I have one extra group of 2 ends in the middle of the hem to make it come out even.

 

Then I cut the warp with about 1 and a half inch of fringe. Remove the heddle. Loosen the loom, wrap the towel on the beam and roll until I'm back to the middle where the separators are.
 
 
 
 

 

Then I remove a separator so I have room to hem the end. When done on this end, I will rotate the loom 180 degrees, remove the other separator, and hem the end. When done I'll roll the work on the loom to the beginning and hem that last end. Then I will have 4 hems on two towels. Cut the warp on the other end with 1 and half inch fringe. Remove towels from the loom.
 
I will wet finish these with wash/dry cycle with other light colored towels so I don't get dye or dark lint on them. I will cut the towels apart and put into a mesh bag to help keep the fringe looking better after the first wash.
 
Have a good day!

francorios (not verified)

How is it going on the warp stripe weave along?

Anybody have any questions, comments, or snarky remarks?

(smile)

Have a good day!

 

quejimenez (not verified)

hello all,

finally after weeks (insert 4) of waiting for my loom to be shipped it finally came this afternoon...it took me and the hubby a few hours easily to get it put together...wasn't hard but the holes were not pre-drilled big enough so it took some serious elbow grease and lots of grunting from my husband to get it all put together.

i'm so determined to make up lost time and to get weaving i'm going to try and warp my loom tonight so i can start weaving already...

i bought the kromski harp (32") so i'm going to try and use the warping board to measure my warp. my studio isn't really set up to direct warp and by it being 11pm i'm not inclined to try and make it...

i will try my best to remember to take pictures to update with later...

i have been reading and re-reading "hands on rigid heddle weaving" and my it was like reading japanese until i had the loom in front of me...so for any newbies like me...it makes more sense as you see and do...

wish me luck...hopefully when i return i'll have my loom all set and ready to go for t.v./weaving time tomorrow evening!

by the way everyone's wips are looking really wonderful! 

kiandra

quejimenez (not verified)

 can u come to my home and warp mine tonight? =)

u seem to be sooo good at it...my brain is twisted and swimming with weaving terms and what nots....

 

francorios (not verified)

Good luck Kiandra!

Keep us advised and we'll try to answer any questions you have!

Have a good day!

quejimenez (not verified)

just a quick update...

i didn't manage to warp last night, but i was up bright and early this morning and warped on my harp...and got it half-way threaded.

here's what happened (or should i say what i learned):

i started winding my warp with way too much tension and yeah...i couldn't finish the whole warp as the threads started slipping off the pegs...lesson #1 learned? don't wind too tight...even tension...not tight tension.

when i started the next warp (after i had to take the too tight warp off) i was interrupted by my 5 year old (who woke up early) and forgot the middle 2 color strip in my warp...lesson #2 learned? pay attention

the great thing is that i had my warp broken up into segments...so it was "somewhat" easier to thread the loom...easier in that if (or shall i say when) i got interrupted or needed to tend to the little ones...i wasn't siting with a whole hand full of loops that needed to get threaded...

the flip side of that is that my hanging threads are all messy...i've "stroked" them out and not combed them and that has helped somewhat but the are still continuous loops and have the guiding ties at the end of the loop...i'm hoping that as i start to wind...they will relax a bit...

i do have a teeny tiny question....

when i was holding the cross and threading the loops on the the end beam...a few times the loop would slide off the hook...i'm hoping...and this is where my question comes in...that i looped it back on correctly...if the loop falls off...how do i know that i'm looping it on correctly...

and lastly any suggestions on how to wind the warp on if i'm doing it solo? the video that come with the harp says i need to have help to keep the tension...any suggestions since my hubby will be home too late?

hope everyone is having a good day and progressing along well...

kiandra

Caroline (not verified)

hi Kiandra. Ashford suggest holding the warp back over the heddle as you wind on - so you can hold with one hand and wind with the other ( not sure how this works out in practice) so what works for Ashford should work on another brand? Otherwise tie your warp to a tin of baked beans or something similar and wind on. I wouldn't want it to be too heavy  in case it stretches and distorts the warp.

Hope this helps.

francorios (not verified)

Hello Kiandra,
 
I'll try your last question first. Solo warping. That is why I try to use something with weight to have some resistance for warping on the loom.
 
Try Ashfords site which has a PDF about solo warping that looks really neat. You may be able to make it work for your loom.
 
I'm not sure I understand about the loops, but I do know that when your warp is looped over the bar and you put the ends through the hole and slot, you are good to go.
 
I don't worry about the cross the way I do it, but then the way I do it is labor intensive anyway.
 
Hopefully one of the other weavers can answer that one.
 
Have a good day!
Franco Rios

francorios (not verified)

Here is my finished "Playtime" towels. I cut it apart before washing but I could not find my mesh bag for washing, so they were in there like normal towel. The towel on the left side has a rough selvedge, I'm not sure what happened. I think it will come out on the next wash but I need to more practice so that does not happen.

Here you can see the whole towels. The finished sized is 15 inch wide by 22 long.

Have a good day!

 

quejimenez (not verified)

 so i finally got some weaving done! yay!

i must say that i love this loom...granted i've never had any other...if you don't count the ones my husband fashioned out of scrap wood...and screws.

i tried to upload photos here but they were very large...and i didn't have it in me to re-size them...so i cheated...and put them up on my blog...

http://quejimenez.typepad.com/quejimenez/2009/10/1st-rigid-heddle-weavingand-other-things.html

the beginning is about this project...the rest is just me rambling on...

hope everyone is doing great!

kiandra

bolivian warmi

Hi Kiandra,

I checked out your towels on your blog. Looking good! It is very interesting  for me to see what 8/2 cotton looks like on the loom as there is loads of that about here in Bolivia where I live. I can get other sizes too but in very limited colors-like black white and tan and that's all. It is great to see that towels are possible with 8/2. That is actually what was stopping me from participating in this WAL. I didn't think I could get the right yarn. In the meantime, however, I have gotten involved in another back strap project but will be storing this information away for later.

Laverne

francorios (not verified)

Bravo!
 
Great blog entry! I like the step by step narration.
 
The 8/2 cotton is a good choice and your stripes have good proportion.
 
The edges will improve with practice. The plainweave looks very good, very evenly spaced. I need to buy some of that 8/2 cotton.
 
Keep it going!
Have a joyful day!

claudia (not verified)

Hi Kiandra,

The towel looks great!  I have the Kromski Harp and love it too.  I got the stand for my birthday in August and it has made all the difference for me.  It's much easier to use than having the loom on my lap at the table.

One question:  did you double the 8/2 yarn when you threaded the loom?

Also, to load the photos, go to the Help section and you will see the topic "Uploading photos in the forums"

or you can go to YouTube and watch this video created by PattyAnne: http://www.youtube.com/watch?v=8pmEdxZUyY0  We are trying to find a way to add the video to the Help section.  She did a terrific job and covers your issue of resizing the photos so they fit in the forum post.

Claudia, Weavolution co-founder

quejimenez (not verified)

 thank you franco!

a lot of my readers are not weavers...well lets just say dare to say none of them are..so i thought i'd give a little instruction as to what was going on...hopefully i'll turn them on to weaving...wicked i know!

i was a little worried about the 8/2 cotton...and the sett...but i'm guessing once they get thrown into the wash things will fair well. 

as for the edges...my left is well...my right...geez...its not that great...weird being that i am right handed...i'm sure i'll figure it out though!

thanks for all your encouragement and for heading such a wonderful wal ...its really helping me get comfortable on my loom...which i'm absolutely loving!

quejimenez (not verified)

 oh my claudia, isn't this harp the greatest? i was so afraid of warping...and the main reason why i purchased the harp was because it had the built in warping board...not to mention it seemed to offer the most for the price...and man am i happy i did!

i thought that warping was going to be horrible...with a few problems it all ended up fairing well...not too bad i think for a first time...i learned a lot so hopefully i won't make the same mistakes again...*fingers crossed*

i really want the stand...i knew i couldn't afford it all at the same time...and with christmas around the corner i figured i'd get it before the year is out...i'm imagining that it will make a world of a difference...and i'm really looking forward to it. in the meantime i'm going to try and get my handy husband to fashion me something so i can weave in bed while watching movies with him...lazy huh...lol...but i got to try and multi-task as much as i can!

i'll check out the link to the video...thanks for the heads up! and thanks for starting weavolution...i can honestly say if it wasn't for weaveolution...i don't think i would of taken the plunge...so thanks!

quejimenez (not verified)

 hi laverne,

ooh do buy some of the 8/2 it is really good for warping...and the color choices available are so plentiful! to be honest i was sort of hoping that i had of bought more 8/4 but i think the 8/2 is really great for warp...

by the way...i've been checking out your work and it is tremendously inspiring! there is so much in weaving i want to explore its mind boggling...ahh the possibilities! your work is simply beautiful! 

i'm hoping to do some tapestry like stuff...and am so interested in navajo weaving...i read in "hands on rigid heddle weaving" that i can do tapestry on this here loom...i'm sure hoping so!

i can't wait to see what you do in this wal when you get a chance!

 

bolivian warmi

Hi Kiandra,

Thanks for all the kind words!

I have loads of 8/2 and a loom so it is just a matter of DOING it! I do wish I had bought a loom with built in warping board as that is a bit of a problem for me. I think my heddle is finer than yours, if that is the right word. I AM excited about follwoing all Franco's great instructions here but I really must discipline myself and stick to one project at a time-but so hard to do-so many temptations! 

Laverne

Mary Beth (not verified)

I just started weaving!!

 

Hi everyone!

The UPS man finally showed up on Thursday of this week to bring my Ashford rigid heddle loom (24") and I was sooo excited!

I threw it together, and jumped in with both feet. Found some sugar and cream cotton yarn laying around and warped it up and just started weaving. I didn't know or care what I was making and I did have to start over about 3 times, but I did it.

I still don't know what it is, but I did learn that if you rush too fast with weaving, it isn't pretty. I also realized that I was beating it way too hard because it is very tight. I do think I need to get a stand for the loom. I just can't get it at a good angle, but that can wait till Christmas if I have to. lol

 

So, I found this WAL and decided to try a real pattern and to follow the directions. I am going a lot slower and trying to be neat so hopefully I will do things right this time.

Thanks so much for doing this and I will try to get pictures up today!

Caroline (not verified)

Great stuff, Mary Beth! And welcome to the obsession! Rigid heddle looms are so user friendly, and while it seems a huge learning curve to start with, once you get going there is soooo much to explore! And its great fun and very satisfying to create a piece of fabric.

A stand is a very good idea if you cannot get comfortable while weaving. I have a knitters loom which has a notch underneath so I can prop it up against almost anything, which is great, as the side of a settee is good enough, and I have heard that its possible to use it in bed propped up against your knees. But my other loom does not have this and its harder to get comfortable without clamping it to a table.

There are also some good books around, but I would suggest checking out your local library first, ordering books in on interlibrary loan if necessary, rather than rushing out and buying too many first off.That way you can see which ones are keepers and you can't live without.

francorios (not verified)

Welcome to the group Mary Beth,

I have a little dishtowel that I beat very firmly when weaving. It's almost thick enough to be a potholder or saddleblanket.

For a quickie loom stand, I attached a craft frame to the end of the loom.

For more pictures of my "kick stand" loom support, go to

www.rabbitgeek.com/erica.html

Have a good day!

Mary Beth (not verified)

I finished!!

 

And...I need lots of help!! I had a huge problem with my tension. Just a few of the weft yarns got loose, but that made it a pain in the butt to keep weaving, so my second towel is MUCH shorter than it should be because I quit earlier than I should have. Another reason it is much shorter, is because the first one is MUCH longer than it should be!! I guess I am not much into measuring exactly...lol.

I love the way my first towel turned out though and want to make lots more!!

Will post my pictures once I get them on my computer. Gotta go get dressed now though!!

 

I do think I need a stand for my Ashford RH. (might have to give my loom a nickname)....I would like to weave in other places in my house, other than the corner where it is now, but I can't carry a table around with me too well now, can I???

lisalarson (not verified)

 Is it too late to sign up for this project?  I just bought a rh loom and have never used one before.  

Mary Beth (not verified)

Lisa,

Just jump in!! I just got my Ashford RH loom last week and am about to start on my second project. (the first one had a few problems....)  You will love it.

 

I am pretty sure I have figured out how to measure as I weave. But..does anyone have any tips for what to do when my warp loses it's tension? Just a few of the strands were really loose after a while. I thought I had them even from the start! Very frustrating.

 

Could someone explain to me how to hem the ends of the towels instead of having fringe on them? I would like to try that this time because next I would like to make some curtains for my kitchen window.

 

 

Caroline (not verified)

Lisa, these WALs are pretty much an ongoing thing, so as Mary Beth says, jump in! and don't be embarrassed to post photos on the photos page, we all start off as newbies and have our oopsies.

Mary Beth, loose warp threads can be tensioned by hanging something off them. The old film canisters used to be popular, but fishing weights are goo, as they come in different weights and have holes through them that you can thread to hang them off your loose warps. Its a bit like trial and error, but this is a time-honoured method of doing it <grin> and we all do it at some stage because thread will stretcch when you least want it to.

If you can find your way to Franco's blog, I think he said he has posted a link to a Youtube video showing how to hem your tea-towel. Otherwise its a case of reading your way through all his postings to find it.

francorios (not verified)

Instead of fringe, you can machine sew a couple rows of zigzag to stabilize the weave, then cut the cloth, then you can fold over to hem it.

The towel above was hand hemmed, folded over 1/2 inch twice, then hand hemmed again. The hems are FAT! I'm told that making the hem one inch wide would lay flatter.

Click here for larger image:

http://www.rabbitgeek.com/pics/denimtowel.jpg

Loose warps: Usually I get a few loose strands on outer warps. I am in the habit of shoving "sharpie" marking pens between the loose warp and the warp beam. Other people hang weights on the warps between the heddle and warp beam.

Have a good day! 

francorios (not verified)

Hi lisalarson,
You can jump right in at anytime.
 
This is not a swap activity, so no one else is waiting for you to finish. You start at any time and we will be here to answer questions and cheer you on!
 
So what kind of loom do you have and did you get instructions with it?
 
Have a good day!
Franco Rios
Volunteer enabler
Submitted by Anonymous (not verified) on