Hi!

 

I 'found' this group today when I was looking at WeaveZine (which I am also new to). I am a member of UK Onlineguild for weavers spinners and dyers. I live in the UK and am an experienced knitter but always learning more. I also thought I had weaving in my blood, as I grew up sort of sitting under my grand mother's big old-fashioned 4 shaft look, cutting up cloth for her to weave with. Also have several other amateur weavers in the family, in Scandinavia. But when I went on a weaving course in London something like 30 years ago, I discovered that 'ordinary' (eg 4 shaft looms) weaving bored me, whereas I loved the immediacy and the very hands on bit of tapestry weaving. Not that I have kept it up!

I am not completely, but very nearly new to back strap weaving. I have done a bit with tablet weaving, using a back strap technique. But not kept it up. Also I went on a day learning peruvian backstrap weaving some months ago. But, in truth, though I love the idea, I have mixed feelings of the back strap bit when I try it. 

1. It's that bit when you have to answer the phone/door/get a coffee/go to the loo and you try to disentangle yourself and then all the weaving ends up in a tangle. I have had that experience with tablet weaving and got thoroughly fed up with it. 

2. Due to lack of suitable places to hang the far end of the weave on in my house (and a place I want to spend time doing it in) I have ended up  rubbing noses with whatever TV personality is on the box - it, the TV,  stands on a table with a good thing to attach to, but not only do I end up in an awkward position, in time, but also I trip up all and sundry as they try to get past me. 

3. The idea of sitting on the floor with my legs stretched out in front does not only sound cold here in the UK, but also the very thought gives me backache!

So, before I even start I have to think of how I can adjust to my own needs and situation, as I do love the idea really!

On the plus side, I have thought long and hard how to adapt my rigid heddle loom to have some of the features of a back strap, eg de-rigid heddle it. I haven't started yet, but I hope it will come soon as I have a big project I want to get on with. Also I have just 'discovered' kente weaves and love the look of them!!!!! And want to incorporate some of the ideas it gives me into my project (this could be a 'famous last word' moment).I want largely to weave in wool at present, as I am in to sheep, spinning (a relative beginner), natural dyeing with plants, all with wool as my choice. At least for now. 

By the way, I also love peruvian/bolivian weaves, scandinavian bands (I have had two swedish style, back strap mini rigid band heddles passed on to me from an older relative) and I saw some wonderful back strap weaving when visiting Sikkim a couple of years ago (can post photo of weaver if anyone's interested). 

So, really, I have joined to explore. And learn. And discover the way forward that suits me. 

 

Aquinnah (not my real name)

Comments

bolivian warmi

Hi Aquinnah and welcome,

Well, firstly you have to be comfortable doing this so it is worth putting some time and thought into finding the right place and the right position for YOU. MY place and position can be seen in the Weavezine article. I know that some of the other members here tie up to their floor looms and other bits of furniture. One neat way I have seen is placing two clamps on a table and hooking the loom bar into them or behind them. Esmecat and jeannine (two members) do this.

    

You can sit on a chair. Franco sits on the sofa.

Un hooking without a disaster takes practice. I find it best to hold the loom bar and warp under tension with one hand while slipping off the backstrap with the other and then gently placing the loom on the floor. However, if I am in the middle of a pick up row I don't get up for anything! In fact I use backstrap weaving as a good excuse not to answer the phone!!

I am sure that others will come along and give you some tips and yes, I for one would love to see a photo of the weaver in Sikkim. Also if you have a photo of where you live, we have a thread called ''My little corner of the world'' and it would be great to see a photo of your neck of the woods there.

Laverne

 

 

 

 

 

francorios (not verified)

Hi Aquinnah,

Un hooking - I hear you. It's tough to get up.

Caroline, another member here, says she uses "S-hooks" and I am thinking that s-hooks or spring locking clips might be just the ticket for quick disconnect.

Always tie safety strings to shed sticks, heddle sticks and cross sticks.

I have been using my foot to hold the far end loom bar. I can sit on the couch and prop my leg up on a footstool or ottoman or even a laundry basket turned upside down. I use a couple of pillows to prop my back on the couch as I sit forward.

I would like to get the weaving up at a higher angle, closer to 45 degrees so I won't have to lean over as far.

Have a good day!

bolivian warmi

Hi Franco,

would you put some photos of your way of sitting and setting up on the ''ergonomics'' page, please?

Laverne

Aquinnah (not verified)

 Hi again!

 

I will try to load my photo of the sikkimese back strap weaver. however I am not used to this system and have NO idea what an image URL could be. so bear with me until I manage to find out. 

 

Aquinnah

Caroline (not verified)

hi Aquinnah, I'm Caroline, in Australia, and an ex-pom. I'd love to see that photo of the Sikkimese weaver! My interest is in Asian backstrap weaving, but since there is virtually no information about it, or only in rare books, I'm learning South American style, which I also love. There is not so much difference between the techniques, its in how they use the technology, and pattern design.

I sit on my sofa to weave. I have a backstrap project attached to a strong hook in the window frame - which takes up the whole room when stretched out, grrrr, and I also attach myself to my inkle loom for short projects, but my favourite position is attached to my curtain rails if possible, and I do that with S hooks, the square heavy duty pot-plant types so I can lean back and really tension everything. That way I get a nice steep slope to the warp and don't have to lean over my work. This works very well with card weaving. I'm also experimenting using the bars from tapestry frames as they are  quick to release because of the notch in them, and octopus straps for tension.

I think we all do it differently, according to our personal settings and situations.

Aquinnah (not verified)

 Thanks!!!!!!! I now know what an URL is (thanks, husband mine), now I just need to find it! I shall study the instructions you have given above with care - once I am back from the sheep fair I am off to for the day!

 

Aquinnah

Aquinnah (not verified)

 Hi Caroline!

I will get to showing the Sikkimese back strap - once I have worked out how to do it! they use a near vertical slope by the way. I also, somewhere  among my photos, have a pic of a band/belt I bought in the same place where I saw the back strap weaving. I'll include that too. By the way I also have a some nice photos from a Tibetan Self help regugee centre in Darjeeling. No back straps, but some other interesting pics if you are interested at a later stage. 

As for curtain rails - I wouldn't dare! I put up the rail and it holds the curtain fine, but putting more pressure on it........I think we would be without a curtain before long! I must think again, there may well be solutions that I so far haven't thought about, and reading all this encourages me to look for them. 

Aquinnah

Caroline (not verified)

hi Aquinnah, Do you have something called Liquid Nails? Its a sort of silicone glue ( I think) but its very strong and I can swing off anything put up with it, hehe! I don't use wall plugs, I use that instead, so what I put up tends to stay up - I can't always say the same for the window frames, lol!

No, I should not be naughty and recommend that, husbands tend to get annoyed with wives who use it - I just used my curtain rail as an example of somewhere fairly high and out of the way. I have short arms and need all the help I can get.

Some of the South American weavers anchor their looms up high, some tension them with their toes, so I think it has to be whats available and what they prefer. Many Asian houses have very low ceilings, so the verandah posts are not generally very high, but I have photos of a couple of Nepalese weavers who are able to hitch their backstraps up high. Also there is the very practical reason for hitching the loom low - the weaver has to be able to reach it!

Aquinnah (not verified)

 Here's ,y Sikkimese band. So much learning (for me) has taken place today re these photos and it's still only 8.15 am so I won't send a close up just now, though I have them too. I am sorry about my faffing around with the photos above - but at least the large photo give s a reasonabl;y clear close up of her hands and how she uses her sticks!!!

          

Caroline (not verified)

Thats wonderful! Sikkim is up near the border with China isn't it? Bhutan and Nepal use the backstrap loom, so does Ladahk, and China of course still does. India seems to have all but given up on using it; they haven't realised that traditional weaving can be a better source of income than trying to compete with the big weaving mills. Its a hot political issue over there. What amazes me is that when you look at the motifs and techniques used, there is not so much of a difference as you would think between countries as far apart as Peru and India.

bolivian warmi

For Franco who was asking about circular warps this photo of the Sikkim weaver is excellent and clearly shows the rod around which the end loops dovetail.

Thanks for posting these Aquinnah.

francorios (not verified)

Thank you Aquinnah for uploading that photo of the Sikkim weaver. The detail is wonderful and I can see the extra string heddles for the warp patterns.   Thank you Laverne for pointing out the rod where the end loops dovetail. It's amazing to me how the poncho weaver in South America uses the same trick that the weaver in Asia uses.   Other question, above the two shed rods on the Sikkim weavers loom, I can see a stick that looks like it has the warps wrapped around it? What is that for and how does it work?   Have a good day!

bolivian warmi

The only time I saw that kind of rod in use was in Ecuador for ikat weaving. I was told that it was used to stop the warps from slipping and moving out of place and thus ruining the ikat design. I used one myself when I was playing aound with ikat.

On diagrams in books that I have, it is labelled either ''warp spacer'' or ''coil rod'' without going into the specific purpose of the rod. It certainly has its use for ikat but I can't say what use it has for the Sikkim weaver.

You may be able to make out the rod at the top of this ikat weaver's loom in Ecuador.

EDIT....I just found a reference in a book saying that it is often used in place of a tenter stick to help maintain the width of the weaving.

Laverne

francorios (not verified)

Thanks Laverne,

I can learn something new everyday if I just pay attention.

Have a good day!

bolivian warmi

AND I learned something new from this too!!

francorios (not verified)

Another question. How does someone move it up the warp?

Would a person move this warp spacer/tenter/coil rod? Would you roll it?

Have a good day!

bolivian warmi

Mine was on a straight warp so it sat the whole time up the end at the far loom bar so I never had any need to move it. It worked well as far as stopping the ikat warps from moving out of place and blurring the design but I had other issues as I was using my handspun llama and some threads stretched under tension more than others due to uneven spinning. This normally wouldn't matter that much but with ikat it does.

They would have to move it from time to time on the circular warp. I have not seen it done but would imagine that by taking some of the tension off they could slide it and slowly inch it up the warp.

 

Caroline (not verified)

I've shifted a circular warp on an inkle loom, and for that you just loosen the tension enough to slide it around, but with everything attached like on a backstrap, its easier said than done as it has to be undone from whatever method you have used to stop it  sliding in the first place. 

I had anchored mine top and bottom, which is over-kill and requires a certain amount of physical contortion to stop everything dropping out when you tackle the far end.  It just needs to be anchored at the backstrap end then when you undo the ties, it literally slides around and you can re-tie it once its gone far enough.

Aquinnah (not verified)

 Sikkim, an independent kingdom until sometimes in the sixties, I think (when India 'took it over', due as far as I understand to gain easy access to the border with China), is a tiny bump on a map of India just north of Darjeeling, sandwiched between Tibet (west), China (north) and Bhutan (east). We would have loved to go to Bhutan, but Sikkim is a far cheaper option! And I think with a lot of similarities. 

Aquinnah (not verified)

 Clpse up of sikkimese band

Now I shall try to add on a close-up of my sikkimese band........Oooops, it worked!

bolivian warmi

You have got the photo uploading down! I am trying to identify the weave structure. Could we see what the other side of the band looks like, please? Is this part of their typical costume or some kind of ceremonial wear?

Laverne

Aquinnah (not verified)

 The photo shows both sides - if you look closely you can see that the patterns are the reverse of each other. I do have more close-up photos - and the band - so I can take more photos!

I never saw anyone dressed in anything like this, everone wore either 'western' gear or the tibetan style chubas. Can't say if it is ceremonial, but my bet is rather that it was once normal-ish wear, to be used as a belt. In fact I think someone said it was a belt.  I am just rushing off out, but if you want the other side as big, too, I can probably take a photo of that tomorrow. 

bolivian warmi

Oh yes. Both sides-now I get it and this last photo is a lovely close up. Thank you.

Anymore thoughts on your own backstrap adventures?

Caroline (not verified)

That is beautiful weaving, so is it done with a supplementary warp?

Aquinnah (not verified)

 Bolivian Warmi: yes, I have been cudgelling my brain as to where I could attach a weave! And I may have a solution. But as I am doing the cudgeling and thinking, it has also struck me that it is so much about the patterns that go with back strap weaving that I really like. I think I am a 'folk lorish' type of person! And confession time: for a year I have been planning a rather large project on my small rigid heddle, but unhappy with the basic limitations. Between this , the bit on Weavezine and seeing african back strap my thoughts have really moved forward. I plan to continue with my original plans re this project (a blanket from strips) but how I can introduce interesting patterns and effects have really been influenced in just the last week or two by all this. I have already attached heddles to all my warp in my trial strip to enlarge what I can do with it. But it is still not back strap. I will get there! I want to try my aunt's band weaving looms, known as 'band gates' in swedish (small rigid heddles used the back strap way), and then there's the peruvian stuff.......so many ideas!!!!But not necessarily matched by skills.....

 

Caroline, I have no idea about supplementary warp. I don't even know what that is! So I can't say.  

Caroline (not verified)

I have a little Swedish band loom, but not had a chance to try it out yet. Mine has 2 rows of holes so I can do pick-up.

Many of the patterns have very similar techniques and its possible to adapt the techniques to different types of looms as well, so there is plenty to explore.

I have a cardweaving project on one backstrap I must finish, and that is hooked up to a large hook in the window frame so the project just sits there behind the curtains out of the way, and I also have a little bag I have started using double weave pick-up, that we learned in the WAL with Laverne, and that rolls up and sits in a pretty Indian bag I have.

Once you find your hook-up point, there will be no holding you back, as it becomes much much easier to use the backstrap than even a rigid heddle! And there is also not much limit on what you can weave on the backstrap, as you can do 4 shaft weaves. Its a lot slower, but there are ingenious ways around the lack of shafts, and for somethings like the double weave pick-up, I suspect its quicker and easier on the backstrap loom. I have experimented with a basic 4 shaft twill. This is where reading the books on multi-shaft weaving thats adapted for the Rigid Heddle loom  has some pointers for how to extend techniques.

bolivian warmi

Aquinnah,

I have just dragged my yet unused rigid heddle loom out from under the bed-it's a monster!-the 80cm Ashford one and I am planning to warp it without the rigid heddle. I think I am going to put my warp ends on piano wire and lash those to the warp sticks on the loom. I will use continuous string heddles and a shed stick and then the challenge will be to see if I can set it up somehow so that I can sit down and weave comfortably with it. I may have to kick the poor boyfriend off the computer table.

That way people who would like to learn the patterning techniques but are not yet ready for the backstrap can do so. Once they are weaving the patterns and feeling comfortable with that on their rigid heddle looms, they can move their skills on to the backstrap. Sometimes learning to manage the backstrap loom AND weave the pick up techniques all at once is just too much.

Of course people can choose to just get used to the backstrap by weaving plain weave as I show in the WeaveZine article. That way they can just concentrate on the ins and outs of the loom without worrying about pick up and other complications.

Well, I'll let you know how I go with this rigid heddle loom.

Laverne

 

 

 

 

 

 

 

 

Aquinnah (not verified)

 I ahve added 4 'shafts' to my rigid heddle by doing the continous heddles (have I got that right?) using 4 chopsticks and some useful warp, or maybe heddle yarn - bought in a second hand shop in Sweden at any rate, but I have also kept the rigid heddle, which anyway at present is used for my trial sample. With that I can go 'faster' (a very relative word in this context) when I am doing my version of what I think is called krokbragda(?), a norvegian/scandinavian type of pattern that I fancied trying. it's working! I have, as I think I said, spent months thinking how I could rig up something to hang my heddles from. Now they are just resting on the weave when I don't use them! But one thing more I need is a weave sword (?) one of those sticks with a flattened edge. At present I am using the sticks (sorry I really don't have the vocab for this stuff!) that you are meant to wind your yarn on for weaving. I don't use them for that as I have discovered only in the last few days, again, how much more I like just using my hands! My rigid heddle is also an Ashford, I think 60 or 70 cm. I also invested in a stand for it - what an improvement! We never seem to have any useful table to spare anywhere!

 

As for where to hang a back strap - it is now heading for our guest room: Add two coat hooks on the back of the door to the one already there. More space for clothes for guests and a nice room for me to work in! All I then also need is a radio! so I think I have solved it!

Caroline (not verified)

krokbragda (?) means the same thing here, even if we can't spell it. There are all sorts of weaves we can do on the RH loom if we remove the rigid heddle, its very versatile. I will have to try that on my little knitters loom.

You sound as if you have found a nice place to weave. I have found its easier for me to work if the warps go up, as I can have difficulties bending over my work. Particularly with cards where you sometimes have to get a bit physical. But as long as we are comfortable, thats the main thing, and we are not hurting our backs.

bolivian warmi

I am kicking myself for not buying the stand for my Ashford rigid heddle loom although there is an Ashford rep in Chile.........

Maybe you could adapt a wooden ruler for your sword. Find one that doesn't have a metal edge-they usually slope to a kind of bevelled edge along one side which you could improve with sand paper.

Make sure you hang a ''do not enter'' sign on that door. I can imagine you set up in your backstrap loom attached to the hooks on the back of the door and then someone deciding to walk in!!

Aquinnah (not verified)

 Good points both of them (ruler and sign)!

francorios (not verified)

The metal edges on wooden rulers can be carefully pulled out with pliers.

Have a good day!

Submitted by Anonymous (not verified) on