I am new to weaving and am actively looking for a handloom. i saw an ad on Craigslist for an 8-harness Kyra loom.  I am having a hard time finding out anything on the internet other than they were built in upstate New York  Can anyone give me any information on this loom.  Thank you.

Comments

lkautio (not verified)

A friend had a beautiful cherry one that she used for some of her master weaver ratings for Hill Institute.  It was  very well built and worked very well.

Laurie Autio

apw1970 (not verified)

Hi.  I own an 8/10 Kyra that I bought secondhand from my local guild.  I have been very happy with it.  They are very very sturdy, and are furniture-quality.    It is very solid.   I am trying to think of bad things about it.   The heddle frames are bendy-steel metal and they can be hard to put in the hooks.  I have a conglomeration of heddles on the loom, and they don't slide all that smoothly, which can be frustrating.  I am not sure that the heddle bar issue is endemic to all Kyra looms, or just mine.  When I bought the loom, one of the guild ladies said, "you will either love it or hate it" and "this loom really needs to belong with one weaver and not in a guild studio."   Overall I have been happy.  The storage tray on top of the castle is nice.  The tie-up is pretty easy, but you need to make sure that all the treadles are even when you tie them up, or you may encounter problems.  I wish the shuttle race was a little wider, but that isn't a really big issue.    This loom does take a fair bit of space as well.  Kyra looms were made in Springville, NY (south of Buffalo) by a gentleman, not a company.  The looms are no longer made, but any good loom tech should be able to help you out.

Buy the thing; use it for a few months, then sell it.  You should have no problems selling it.  I sold my old Norwood 4/6 in 2 days for $650 and bought this one for $600. 

 

Hope this  helps.

Allen

costlycolours (not verified)

 I also own an 8/10 Kyra which I bought from the second owner in the spring of 2007. I had just started weaving that winter. The first owner gave it up because she was no longer weaving, and had apparently done a lot of rug weaving with it.  The second owner bought it but did not use it.  The Kyra is my first loom, and I LOVE it.  I have primarily woven blankets, scarves, and dishtowels, but look forward to trying other things.  I love the sturdiness of the loom, and really have no complaints or concerns.  I remember my weaving teacher talking about tie-up as being problematic, but with the Kyra it is so easy. Depending on the patterning, the shed can be very easy to pass any shuttle through.  I paid more for the Kyra than Allen, but considering what I would have wanted to buy new if I could have afforded it, I have felt like I got a great deal and with all the features.  

Good Luck.   Susan

Oh and thanks Allen for the additional information about the loom maker.  I had figured out the upstate NY part, but no further. 

 

gmitchell

I am considering a used 8 harness CHERRY KYRA loom with new heddles. I am a beginner weaver, still using the studio loom during my lessons and am hoping to have my own before Christmas. Any more feedback out there on this loom?

lil-warped-lady

Hello, was wondering if anyone knew about the Kyra loom enough to help me....

On the storage tray on top of the castle, there is a tool? that fills the tray. It has two dowels on either end...almost looks like some kind of warping helper. It does come out of the tray soi that you could use it....if you knew what it was for. :)

thanks for any help.

 

klk1220

I bought a 36 in. 4/6 Kyra loom used last summer and moved shortly afterward so didn't try it out for some time. The problem I had was in keeping tight tension. The friction brake on the back warp beam would not hold tight against the barrel. I think I finally have that right now by removing a link on the chain that attaches to the brake release. The other unresolved problem is the fabric beam won't rotate. It is so tight that it won't release to remove the fabric even with the ratchet and pawl disengaged. This was a problem even before the tension problem. I was wondering if squirting a little WD 40 around the ends where it's bolted into the frame would be a good idea, or is there another solution. 

Thanks for any suggestions.

sandra.eberhar…

Whatever you do, don't put WD40 on it . WD stands for water displacement, and it's intended to displace water from cracks.  It has oils that dry to a hard sticky residue.  When I have a beam that won't move freely, the first thing I do is check for sqare and level.  An out of square frame will bind.  Then I would look at the brake and release very carefully to see if it is locked.

Did you disassemble it to move?  I'm not familiar with Kyra, but with some looms it is possible to switch the warp an cloth beams.

Submitted by Anonymous (not verified) on