Hi Again Weaving Friends, 

Such basic things, but I'm still puzzled by warp chains. I thought that I understood how multiple colors of warp are connected but somehow I've made an error that I don't know how to fix. I'm making a rag rug and The pattern has three colors of warp from right to left :     [ (DDD EEE) x 6 ...then DDD x 1...BBBB x 3 ...EEEE x 3 ...EEEE x 3 ....BBBB x 3 ]  all of that three times then ... DDD EEE x 6 ... then DDD x 1

I am warping the loom back to front and using a raddle to divide the warp threads. I made 3 warp chains (2 of the long sequence and the 3rd with the last additions) The threads are out of sequence at the cross where the separate chains meet (B over B under B over B under... then new chain D under) Can this be fixed? The instructions call this aHollyood Pattern and is a combo of Double Seed Stitch (?) and Point Twill. It says that the "double ends at the points are not a mistake but intentional" but I'm not sure what that means. If anyone can figure out my mess, please help! Thanks!

 

Comments

kerstinfroberg

If I understand your problem, it is "just" that you have two ends (of different colour) on the same side of the lease sticks? If so, there is no need to fix it, unless the colours are near-but-not-quite identical.

The "double ends at the points are not a mistake but intentional" - are there two ends on the same shaft at the points? That will make the point(s) more visible in the woven cloth. (I have never heard of "Double Seed Stitch", but there are so many weaving words in English that I don't know...)

Sara von Tresckow

You are warping back to front, and hopefully with lease sticks in the cross. It is easy to change the arrangement of the colors when threading the heddles. You can pull a thread out of the cross and insert it in the lease sticks a few threads over without any ill effects as long as you leave the lease sticks inserted for the duration of the project. Once you have the warp wound evenly, it won't hurt if you have 3 threads in one of the cross variants and only 1 in the next one. They are all now safely on your loom. I currently have a 20" warp on a loom where one edge thread crosses all the way over to the other edge, and until the tieon stick emerges will not cause difficulty. Whan the tieon stick shows, you can break and tie any threads that are too tight to even out the tension, knowint the knots are on loom waste.

smfennew

I'm new to weaving but I thought I understood the problem - and now I'm not sure I understand the answers.

I thought the answer should be: it doesn't matter. The lease sticks are there to maintain the order of the threads before you insert them into the heddles.  It doesn't matter if the new chain is over then under, or under than over - it will still keep the threads in order.

MJWallace

Just as Kristen says don't worry about having two threads on the same side of the cross at the joins.  It is happening because there is an uneven number of threads in each warp chain.  It will not make a difference in the winding of the warp on the back beam.

Just respect the colour order as you are threading.

What the "double ends at the points are not a mistake but intentional" means is when threading the twill sections, the pattern has two threads on the same shaft side by side at the point of the reversing twill.

Submitted by Lenore on