Acrylic/Chenille Scarf on backstrap loom


(click on picture to view larger image)
My lovely wife Tracy has a stash of yarns. She asks me to use some of this. The chenille yarn is 41% acrylic/59% viscose. The flat ribbon yarn is 94% viscose. I decide to make a scarf.


I do not have a long warping board, so I hung the loom bars on the chairs and I continuous warped 7 foot long, 12 warps. I used pencils and rubber bands to hold the cross. I figured the chenille would weave at about 3 inch wide and my guess was pretty good. I would try to weave 5 foot long with 12 inch fringe.


Here is the weaving in progress. At first I beat the chenille firmly and found the scarf was as stiff as a carpet. So I loosened up the the weave by pulling it back up the warp and putting it back down the warp with a comb. Then I started weaving again from that point and did not beat it so hard. Much better feel. Kind of a balancing act between beating for a firm weave and having a loose weave/drape by placing the weft, not beating.

By the way, that is a wooden footstool under my leg. I am sitting on our couch which sits kind of low. I have a pillow behind to help support my back. The television is to my right. The remote control is on my left.

I have a new rule for myself. If I find myself watching TV and not weaving, I am to go and warp something so I can weave during TV time.


At the end of the weaving, I hem stitch both ends of the weaving with the chenille weft.


I tied the warps close to the weft with overhand knot (groups of 3) and I tied overhand knot each individual warp 1/4 inch from the end for fringe. Finished weaving length is 51 inch chenille woven plus 12 inch fringe on each end. I used one of those big balls of chenille and 91 feet of ribbon yarn. It took about 3 days maybe 6 hours altogether.

Each project teaches me something new.

Have a good day!

 

Comments

bolivian warmi

I got a lot of chuckles out of this story-I love your tv rule. I can't watch tv when I weave because I am usually doing pick up but sometimes I have it on and listen. Now I realize that these days unless you watch an ad you have no idea of what is being advertised-what ever happened to a good jingle?

Anyway................, another great fast and learn-as-you-go project. I bet Tracy is pleased with her scarf. I am so glad you are finding so many uses for your backstrap loom. I see you are using the stabilizing stick for your shed stick. :-)

Caroline (not verified)

That has come up beautifully! I'm using my knitters loom at the moment, weaving a scarf using 4 ply wool warp and the same wool 4 ply and a fancy acrylic yarn as weft. As I have 7.5 dent rigid heddles, the warp is very spaced out, but this is leaving me with a lovely soft textured scarf. I hadn't actually thought to do it on the backstrap,  silly me, but by using the backstrap you can use the thicker fancy yarns for warp as well, something thats not always possible with a 7.5 rigid heddle, and then you can get a far more balanced weave than I am getting at the moment.

How did the chenille perform through the string heddles? That would be my biggest worry. I have a textured warp on another loom and its not the easiest to handle - I was just determined to see if I could do it, and to weave a shawl or whatever with it.

francorios (not verified)

I'm actually using that ruler for shed stick and beater. The pencils hold the cross just fine. And are just loose enough to slide up as I weave.

I'm also getting used to the string heddle instead of using a stick to manage the string heddle. At least it worked well with this widely spaced warp.

The string heddle doesn't really touch the chenille weft. The warp is the flat ribbon yarn and that is no problem with the string heddle. The chenille does bump the warps around as it goes through the shed, but not too bad. I might make a rag shuttle to handle the chenille in the future.

And my lovely wife Tracy is going to sell the scarf at the crafts show next month. If it doesn't sell, then she will wear it. She is in front of the TV knitting a stack of hats on her Knifty Knitter peg loom for the craft show.

Have a good day!

Caroline (not verified)

I've started making for a craft show as well, in December so its really well timed. I'll have my spindles there, some handspun and some batts, as well as a few cell-phone cases and little quick things like that. I finished the scarf last night, and got the fringe done, and am actually quite pleased with it, pleased enough that I might just do another if I have enough yarn left. It only just fitted on the front beam of the Knitters Loom so that quickly found out the looms limitations!

francorios (not verified)

That's looks good. What kind of yarn is that?

Have a good day!

Caroline (not verified)

The warp and first weft were 4 ply patons wool, but the fancy weft is a cheap 2 ply acrylic yarn I found at my local bargain store.  The first ply is a lashes type yarn, the second ply is a multicoloured fake roving thats thick and thin, and has been dyed to give a space dyed effect. Its very effective isn't it? The blue from the wool gives the whole thing a lift otherwise it would have been rather dreary. These fake wool tops/rovings type yarns have been popular sellers this winter, especially when plied with lashes or similar.

The best I have seen however, is a fake sari silk thats twice the price of the genuine article, hehe! But it was very pretty, and I bet it was kinder to the hands.

Submitted by Anonymous (not verified) on