Hi,

I'm a beginner weaver and have only done a few warps, with no problems, but the last one became a twisted mess!  Each thread twisted onto itself and to other threads as soon as I took it off the warping board.  Has anyone experienced this?  I'm wondering what I did wrong, and how to prevent it in the future.

Comments

laurafry

Looks like there is active twist left in the yarn.  It will take some care but can be used if the thread is kept under tension during beaming. 

Cheers

laura

Emiko N

Thank you Laura.  So does that mean there is a problem with the product?  Should I let the supplier know?

Emiko

laurafry

No, there's no 'problem' with the yarn.  It just has a little residual twist in it.  It's not unheard of and in fact that little bit of 'extra' twist actually adds strength to the yarn.  It just needs to be handled a little more carefully because of it.

I don't know how you are intending to beam the warp - I prefer back to front.  I quite often work with yarn with a bit of twist in it and it takes a little bit of time to get the 'pig tails' out of the yarn once the loops are on the apron rod at the back of the loom, but once the weight (tension) goes on, everything straightens up nicely.  I attach jugs of water to weight the warp chain, but what is used doesn't matter - just that a thread under tension is a thread under control.  :)  This type of yarn is a good example of something that will behave 'better' being beamed back to front instead of front to back (in my experience).

When weaving plain weave, if the density is on the looser side the cloth will 'track' during wet finishing, which can add interesting texture to the cloth.

cheers,

Laura

Submitted by Emiko N on