Hi, I thought i'd like to try rug weaving a bought a vertical rug loom. My experience has been using a Ridgid Heddle loom, but this vertical loom didn't look too difficult, so I thought. Wrong! It has a string heddle which I see makes one shed, but what do I need to do to pull the second set of warps to create the second shed?? Any ideas would be appreciated.

Thanks

 

Comments

sandra.eberhar…

Traditionally, a batten is inserted at the top of the loom to form the secnd shed when it's pulled up.  You could use a dowel to make a second string shed.

Evie Hoo

Thanks, I'll have a play with the batten and see if I can get that second shed. Thanks again

 

tommye scanlin

If there are string heddles for one shed (holding every-other warp thread), then, as BWSD mentioned, there should be a second shed held always open by a dowel or batten that has the other warp thread on it.  It's a process of using the string heddles (called leashes) for one shed and then the other shed is always open (the one held by the dowel or batten).

Tommye

P.S.  I just noticed my avatar is a photo of me sitting at one of my tapestry looms that has string heddles and also a dowel for the open shed.  Click on it to see the larger photo to see where the dowel is in place near the to of the warp.

Evie Hoo

Your photo was very helpful.Thanks again

 

Nakia

Hi Evie, I would also suggest you purchase a book or two on rug weaving. Not sure which style of weaving you are working in, but my personal favorite is "Navajo Weaving Way" by Noel Bennett. Even if that style of rug weaving is not what you are using, this book has excellent diagrams, photos and teachings on how to tie heddles on looms that don't have shedding devices.

Good luck with your new loom. Look forward to seeing photos of your progress. 

 

 

Submitted by Evie Hoo on