I am starting a project and am trying to determine the sett.   I am using 2/14 alpaca/silk.  I haven't used this before. I want to use a 1/3 twill construction.  Same weight for warp and weft.   I get 40 wpi.  The books I have read say to use a 2/3 ratio for the sett for a 2/2 twill.   I can't find anything on the formula for a 1/3 twill.   Any suggestions?

Comments

laurafry

Hi Tom,

It sort of depends on what the fabric's function will be.  A scarf doesn't have to be as sturdy as jacket fabric.

If you are getting 40 wraps per inch, (tightly wound, very close together) then generally a set for plain weave would be 20, twill would be 24.  If you want a sturdy cloth, I might go to 27 with a 1:3 twill.  If you are planning something like a scarf, 24 for a 1:3 twill might be just fine..........

Cheers,

Laura

Sara von Tresckow

Eexactly 2/3 of 40 cmes to 26.6 epi. Now for various fudge factors to consider. Yes, 1/3 twill can take a slightly closer sett. Alpaca/silk will also do better at a firmer sett than others fibers. I don't know your loom, but there could be influence there that would cause you to go up or down. Personally, I'd go for 30 epi and see how a few rows weave up. You can always resley between 25 and 35 without needing to rebeam your warp.

There re no firm rules with sett - just guidelines and there is nothing like experimenting a bit.  That's how most of us have come to "know" which setts to use with our favorite yarns and fabrics.

tomrsey (not verified)

Thank you Laura and Sara.  The information gives me a starting point.  I am thinking experimentation is the next step.  I am making a scarf. I will try a few things and see what happens.

Thank for taking the time to help me with this.

TinaHilton (not verified)

Please post what you find to be a good sett.  I have a couple of cones of this yarn and would like to hear of your results. 


tomrsey (not verified)

Because this is a scarf, so it can be looser, and because of the reeds I have, I am going to try this one at 25 epi in a 10 dent reed, and use a 2-3 pattern for sleying the reed.  

 

When experimenting with different epi I would think that you have to complete a section and then I would think you would have to release the tension to see the feel and drape of the completed material.   If you want to try a second  epi then you would have to cut off from the breast beam and resley the reed, and re-tie to the breast beam.   

How does loosening affect the tension of the thread already on the back beam?  

Do I have the process right? Or am I missing something?

TinaHilton (not verified)

Unfortunately the only way to know for sure if you've used the right epi and ppi is after wet finishing.  Sometimes it's stiff as a board on the loom, but after wet finishing it's soft and drapy (tencel and rayon chenille).  Wool will full with wet finishing and look different than when it's on the loom.  Alpaca doesn't full as much, but it will still likely change with the wet finishing.  I'm not sure, however, how much a difference wet finishing will make with alpaca/silk so you might know the sett is right while it is still on the loom.

tomrsey (not verified)

Thanks Tina!!!   I think I am ready to get going on it.  I will make this scarf with 25epi and see how it comes out.   If I don't like it, I will do the next one differently.

 

Thanks again for taking the time to comment.

tomrsey (not verified)

I have finished the scarf and am very pleased with the results.  Thank you all for your help and suggestions.  I used a sett of 30 epi, and a light touch on the beater.   The feel and drape of the finished product is just as I hoped it would be.  Pictures are posted in the projects area.

 

Thanks again for your help.

Submitted by Anonymous (not verified) on