I use a warping wheel, wind on in sections, and thread the heddles from back to front.

I'd like to take advantage of a complicated threading by tying on a new warp, but I have not found a good way to do this.  I understand how to tie on from front to back, but I find it awkward to tie on in the other direction.

I'm looking for pointers for tying on new threads that have been wound sectionally. 

Comments

mrdubyah (not verified)

I must be missing something.  I don't understand the question.  Can you elaborate?

debmcclintock

Hopefully you have your cross tied into each sectional. Or you are working at epi that makes it easy to pick a cross to put some lease sticks in. The lease sticks help you pull your new warp to the old warp so you can sit and tie knots comfortably. Take a look at my photos here in my project and that will help you visualize how you need to put things into place to tie on. Trust me, it gets easier as you work it out between your warp, your loom and yourself.

http://www.weavolution.com/project/debmcclintock/tying-warp-pulling-thru

dibgar

Thanks, Deb.

The link to you other thread was helpful.  I do have a cross in each section and always use lease sticks between the sectional back beam and the heddles, so those warp threads are in order.  I guess what I find most awkward is managing the threads from the original warp.

Do you leave the original woven cloth under tension on the front beam while you are doing this?  If so, this will take some forethought.  In my eagerness to see what I have woven, I typically cut off my woven cloth right away and then just have loose threads hanging in front of my reed and heddles.  Is there another way to keep those threads in place in the heddles and reed and under tension while I tie onto them from the back?

 

sequel (not verified)

It's in one of her books, Warping Your Loom & Tying on New Warps, and might be found on her tips page of her webiste.

debmcclintock

Good specific follow up question...now, before I cut off my cloth I treadle and insert lease sticks in between the reed and the heddles. This set of lease sticks sole purpose in life if to provide "weight" to keep the threads in the heddles under "mock" tension. You can set it on the side loom threads or suspend it to keep it from pulling your threads out in the front or the back. Of course I secure the warp in front with loosely tied 1 inch sections just to secure order. They provide the security of defending the reed threading from pulling thru.

Before I realized the usefullness of lease sticks as a extra set of hands I sat there facing those front threads also. My solution was to weight them with swival weights over about two inch sections. It worked but I like the lease sticks better but you have to remember to do that before cutting. You get smarter with each warp you cut.  As you tie on, just release your knots from a section at a time. That way if a wayward impatient tug pulls warp threads out you don't loose a whole section. Ask me how I know. It is all in your set up!

dibgar

Deb,

Thanks for the additional information.  I'd been using a set of lease sticks in the new warp coming from the back beam but I was not using a second set of lease sticks to manage the old threads from the front.

Sequel,

Thank you for reminding me about Peggy Osterkamp's book.  Fortunately, it was on my bookshelf and it is exactly what I need.  I found many helpful tips in her books when I got my first sectional beam years ago, but I'd forgotten that she had an excellent section about tying on new warps.  I've been threading each new warp from scratch which has been OK for straight-forward structures, but dealing with more complex echo threadings has prompted me to reconsider tying on.

 

 

 

 

mrdubyah (not verified)

I usually just tie the warp threads together in bundles Iin front of the reed and then tie on behind the heddles.  After that, I pull the knots through the heddles and reed, tie on to the cloth beam apron rod and I'm good to go!

dibgar

Mrdubyah,

That's what I tried to do a few times, but I had difficulty keeping the old warp threads in the correct order.  I have 40 thin shafts with string heddles that don't slide easily, but bend back and forth as I pull on individual threads.  I had trouble following a straight path to determine which thread/heddle came next.  Hopefully using lease sticks behind the heddles will keep things in more obvious order.  I think the trick will be to resist cutting off the original cloth right away before I tie on or before I put the lease sticks into place behind the heddles.

mrdubyah (not verified)

I finally get it and agree that the lease sticks are the solution. Best of luck and let us know how it works out.

debmcclintock

The lease sticks are a real life saver when you are working 90 EPI, when you are working 12 -24 epi it is a different story.  Tension and lease sticks help maintain your sanity when you are tying on a new warp to pull thru.

Submitted by dibgar on