I'm about to wind a 10 yard warp with several hundred ends. For once, I have several small cones of yarn, so I'd love to use a warping paddle to speed up the process and hopefully save some abuse on an old shoulder injury.

But I don't know how to use the paddle and It didn't come with instructions. 

It's a Toika paddle, with 2 rows of 12 holes, evenly spaced. It is not the kind of paddle that looks like a section of rigid heddle.

Do I clamp it to something or hand hold it?

How do I make the threading cross? This has me more puzzled than anything.

If anyone can point me to a video clip of the process, it would be great.  I spent much of the day yesterday searching for details on the web, but came up blank. 

Thanks in advance!

Comments

ilaine (not verified)

The short answer is you hold it in your hand. When you get to the end with the thread by thread cross you pick up the cross from the ends in the paddle by doing an over-under-over thing with your fingers from the holes.

The longer answer is get and read Peggy Osterkamp's book on winding a warp and using a paddle. I've saved myself a lot of time and grief by adopting her methods.

Weaver

Thanks, Ilaine,

I have ordered Peggy Osterkamp's book. It should be here any day now. 

Weaver

The Peggy Osterkamp book has arrived, and despite a lengthy chapter devoted to warping paddles I am clear on some things and more confused on others.

I'm going to practice with some heavy thread, each strand in a different color, so that I can see what's happening.

If ever a topic deserves a YouTube video, this is the one, and as soon as I figure out what I'm doing by trial and error, and come up with a simple visual way to explain it, the camera is going to roll.

I have figured out that these are the overall steps to the process when using a warping frame. I'm good on steps 1-3 and working on the rest.

1. Setting up your yarn cones and paddle.

2. Securing the warp to the first peg.

3. Making the threading cross (aka lease cross).

4. Turning around a peg on the right side of the frame.

5. Turning around a peg on the left side of the frame.

6. Making the raddle cross.

7. Turning around a peg at the raddle end, and making the cross going the other way.

8. Turning around a peg at the threading end, and making the cross going the other way.

katec (not verified)

Handwoven magazine had a series of pictures showing how to use a paddle (maybe a year ago, the issue on warping) , but I cannot translate from what she shows on a warping board to warping wheel.  Does the Osterkamp book cover this and does anyone know how to do this without twisting the threads?
Thanks,

tien (not verified)

Katec, are you using a warping REEL or a warping WHEEL?  The warping wheel that looks like a spoked wheel and is sold by AVL has a crossmaker add-on that you can use.  I generally create a 2x2 or 4x4 cross because I'm lazy, but you can also mount a paddle on somewhere near the wheel and get a 1x1 cross from that.  The paddle does NOT need to be held in your hand! it just needs to be mounted somewhere near the cross-pegs so you can pick the cross from it.  I used to clamp it to a shelf right next to my warping board, until I switched to the AVL warping wheel.

berylmoody

There was a comment earlier  about how a U Tube Video would really help understand the process.  I agree 100% with that statement and have recently found two  that illustrate the process.  One is the new warping video by Interweave Press with Madelyn van der Hoogt.  The last 1/2 of the video shows Madelyn holding a small piece of rigid heddle in her hand and winding a warp with four threads.  In my quest to find more videos, I found this link http://www.youtube.com/watch?v=3hj6ssj0uiU.  This is not quite as detailed as Madelyn's video, but also instructive. 

Alice Schlein had a blog post about mounting the rigid heddle paddle under the warping wheel.  I used this technique once and was successful, although it is somewhat fiddly - but then, I guess some experience is needed to get good at winding warps this way.

I realize this is quite an old post - but certainly this subject deserves more commentary and links to places where weavers can see the process.  I've seen Peggy Osterkamp use the paddle and when she picked off the cross, I was baffled.  Maybe afer many years of weaving and warping, I would "get it" now and finally be able to use that wooden paddle in my weaving equipment box.  But, for now, I'll keep on practicing with the rigid heddle piece.

Joanne Hall

It is important to plan ahead.  A rigid heddle gives you a 1/1 lease.  If you want to beam a fine warp through the lease sticks, it is best to have a 2/2 or 3/3 lease cross, not a 1/1 lease cross.  And, if you are winding with four or fewer threads, it is easier to separate the threads with your hand.  With so few, it is not necessary to make a finer lease cross.

Joanne

Submitted by Weaver on