So I picked up some Paton's 100% wool and am respinning it to tighten it up.  Can anyone tell me what I do once it's on the bobbin?  Do I skein it and dunk it in water or just use it straight off the bobbin?  Thanks!

Comments

bolivian warmi

All I can tell you is what my weaving teachers do here in South America and what I do as a result of having worked with them. Of course they respin on a drop spindle and so do I. It comes straight off the spindle and into a ball and from there on to the warping stakes.

Just be prepared when you slide the warp off the stakes......it will spring into action!!! It will totally curl up on itself.

No harm done if your cross has been securely tied off and you have security ties through the end loops. Maybe get someone to help you hold it taut while you slip it off the stakes........just in case.........

Are you going to weave up a narrow sample first to check if you have respun it enough? There is no science to it. My teachers just ''know'' how much to do it and I have gained a feel for it too. Best way is just to make samples and try.

So what was the name of the yarn that was behaving horribly? We should take note of it.

 

 

 

Virag (not verified)

It's sold at Ac Moore but similar yarns are sold at Walmart.  Apparently its better for knit dishtowels.  I think it was Peaches N Cream or Sugar and Spice, something like that.

 

Yep, working on some sampling right now:>:>:>

Caroline (not verified)

Some spinners advise dunking and drying to set the new twist. The argument is that once you full the item when you have finished weaving it, the overspun yarn will promptly go back to its old ways. I'm not sure this actually makes any sense to me<grin> because we would then have nearly everything we wear going back to what it originally was, lol! I have also heard that if you let the yarn sit in a ball for a while, that sets it too.

But since the yarn is held firmly in place in a warp-faced weaving, I would have thought  re-setting re-spun yarn isn't terribly important, because the yarn should be too tightly held in place to have a chance to move.

I'm sooooooo glad I did not waste any money on buying that yarn......................... (apologies to Franco)!

francorios (not verified)

No need to apologize. I buy the cotton yarn because I like cotton and I can usually find it on close out reduced prices.

I also have Paton 100% wool I found at a thrift store. I haven't played with it yet, I was thinking of using it for a rigid heddle project.

Have a good day!

Franco Rios

Caroline (not verified)

Actually I'm a bit envious you can find cheap cotton yarn! I did find Peaches n Cream here in Oz, and it might as well have been pure gold at the price they wanted for it!  Cottons are actually more expensive than  silk yarn! The disadvantage of using thrift store finds is that the yarn is not labeled and the soft knitting yarn is not strong enough for band weaving. The yarns the stores are starting to get in for the summer are all very low twist and mostly not mercerized. I'm not sure how the recycled yarns would handle a washing machine.

I'm wondering if its worth trying to respin some of the softer cotton yarns I have, then sizing  the warp before I weave with it? I used hair conditioner on a wool warp I was weaving with and that made an incredible difference and held the softer warps quite firmly in place. I was able to do that on the loom and it dried quite quickly so didn't hold the weaving up.

Has anyone any experience with this?

 

francorios (not verified)

When I buy yarn, I only buy the stuff with the labels still on.

The Peaches & Creme white 14 oz cone goes for US $6.50 + tax at Walmart. 3 oz balls of color cotton yarn are $1.79, sometimes I can buy variegated colored cones at Walmart for $6.50 but not much selection.

Best selection would be to order from the mill, but then pay shipping costs.

I haven't played enough with wool in weaving, so I'm just building stash right now. I try not to pay more than $1 per skein.

Have a good day!

Franco Rios

Caroline (not verified)

Your 14 oz cone is what it costs for a couple of ounceshere and Aussie brands are more expensive, see why I'm not enamoured? I tried to get Perle yesterday but at $6.00 per 20 grams, its not on. I can buy 1Kg of 70% silk/30% cotton for $100.00 and dye my own, and probably will do from now on.

Caroline (not verified)

Just a thought Franco, why not spin your own wool yarn? You have a perfectly good charkha , and thats the ideal wheel to spin a high twist yarn on. You also have access to some good weaving fleece with some of the traditional breeds, and I've seen what available on Ebay, its like a candy store! and judging from the complaints on the spinning groups, there are a few breeders around with fleece that are too strong for knitting. I've been chasing a strong mohair fleece for months, and breeders here get insulted when I ask them if they have any, lol! No one will admit to it when they are trying to sell fine fleece. But I want to spin warp thread!!

Virag (not verified)

Wool can be a lot of fun.  I think one of the issues with the Peaches and Creme is that it's meant for soft wearing dishtowels and the technique of the backstrap loom with the doubleweave tends towards being something that is more aggressively packed down then the dishtowels.  You might really find you enjoy the wool for some projects when you get to it.  I find it highly addictive:>:>:>

francorios (not verified)

I would enjoy some spinning but right now I've got weaving to do. :)

I have a bunch of ACRYLIC yarn that I bought and need to make into something. I wonder if it can be re-spun for backstrap weaving? I bought it because it was on sale and the colors were pleasant. I made one scarf on a frame loom.

Acrylic used as warp can be very "sticky" when I change sheds.

Have a good day!

francorios (not verified)

Ouch! That's expensive!

Have a good day!

bolivian warmi

Franco,

People will be horrified to know just how much acrylic is used by the indigenous weavers here in South America. They love it for the bright and vibrant colors. So, yes you an easily respin it and weave with it. Wool fibers mesh and make opening the sheds difficult but acrylic is a lot smoother.

I made an Ecuadorian design purse for a friend-it's on the project page-from acrylic. She wrote and remarked on its beautiful sheen wondering if it was made of pearle cotton!  It had been a test piece that had come out really well and I hadn't wanted to risk the expensive pearle cotton on it until I had the technique down.

All the bright and garishly colored things I have posted to the projects page were made from acrylic when I was learning with my Bolivian teachers.

francorios (not verified)

The P&C will pack down nicely if you beat the weft.

The last BS cotton towel I made was done as plain weave. I placed each weft near the other without any beating, just enough to make it straight with the shed stick.

My first cotton towel was done rigid heddle and I beat it firmly. It made a very dense towel that was almost thick enough to be a potholder or saddle blanket!

Have a good day!

Virag (not verified)

I vote for a saddle blanket but then I'm partial to horses!

Virag (not verified)

Here's something from respun Patons 100% wool:>.  It's packing down wonderfully with some, but not too much, fuzzing.  It kinks up on itself if I release pressure.  I'm very happy with it:>

Caroline (not verified)

That is wonderful! I love the colours. What size yarn are you using?

Virag (not verified)

Its Patons Classic Wool which says it's a medium/4 made for use with a 5mm crochet hook or 4.5mm kniitting needles.  I respun it on a Lendrum double treadle wheel and let the twist run up the yarn for 4 sec with my feet treadling right/left, right left each second.  Does that make any sense?  I am lucky to have a Yurt band from Central Asia for my yurt so I had something to use as a rough guide.  My dh came home, touched the piece, and declared it to feel just like the ones from C.A. that we looked at last month:>:>:>

Caroline (not verified)

I think its about what we call 8 ply over here. This is about twice the thickness of the cotton yarn I used for my sample - I'm about to go thinner with the cottons and see what happens, though I shall size the warps before I weave.

Its great when you have something you can use as a guide otherwise its all guesswork. and its even better when your work comes up similar to the item you are using as a guide!

I know the pattern you are using, its in my Cahlander book ( the Bolivian Highland Weaving one) and I was struggling with the way she presented it. Now that Laverne has explained it I can see whats going on and will try a few of the other techniques she explains.

bolivian warmi

Hooray! We are all becoming Cahlander fans-an acquired taste you might say.....

Virag (not verified)

Oh, I forgot to add that when you respin it it changes the size.  I can't today as I'm heading out to do a fiber display but I'll try to come back and figure the beginning and end epi.  I know that the pieces I used as my guide have about a 20 epi and are hard, handspun.

Caroline (not verified)

And Atwater! Its one of the pieces she analysed that I want to use for the motifs of my next project. The motifs are very charming, almost playful, and I want to do them justice - not just repeat them in black and white.

francorios (not verified)

Well, I do like the ACRYLIC because you can wash the finished piece and it doesn't shrink. Especially good feature when I make scarves for my nieces. Washable is good.

I think will let my ACRYLIC yarns out of the closet and put them to work.

Thanks for that info.

You are right about the colors. The brightest colors always seem to come in ACRYLIC.

I think I'll start a thread on ACRYLIC yarn weaving on the main forum.

Have a good day!

Franco Rios

bolivian warmi

My teachers love the bright colors-i think because the Bolivian high plains are so bleak and colorless and the llamas and alpacas just give them black, white, fawn, gray and brown-they have had enough of those colors.

The Ecuador style bag that I mentioned above was made with blue to imitate the indigo that my teachers used in Ecuador  and a nice raw white color as they use their own natural white handspun cotton so the colors don't have to be ''wild''!

     

The Ecuador bag.                                                      The Bolivian bag using my teacher's respun yarn

 

esmecat (not verified)

hhmmm, just coming to this thread, so excuse me if this has already been addressed...

as far as yarn "going back to it's old ways" after the first wash... that sounds more like the advice given not to block yarn AKA weight it so it hangs straight in the skein (not twisting) while drying after washing the newly spun yarn to set the twist.  if you block the yarn, then you are making it stay at a twist level that doesn't match the stored energy in the skein and it will want to return to just the twist in the yarn when you wash it next.

when you wash and dry a yarn, you allow the fiber to expand (with absorbtion of water) and then contract back into shape. if you let them do it without weighting, this lets them settle into where they naturally want to be after the twist of spinning was applied. if it is the first wash after spinning, this evens the energy out a bit and makes it more stable... whacking the skein (grabbing one end and smacking it onto a hard surface like the side of your tub... then repeating with the other end) helps to force the energy to even out over the yarn even more. it really helps make overspun yarns friendlier to work with.

esmecat (not verified)

spinner use a WPI (wraps per inch) measurement to describe their yarn size. if you take a ruler (or other graduated tool) and wrap the yarn around it laying the wraps right next to each other without crowding them, then the WPI is how many wraps in 1 inch. this give you a pretty good idea of the yarn's diameter...

Caroline (not verified)

"as far as yarn "going back to it's old ways" after the first wash".

We tend not to block our yarn here in Australia. I used to, but with the trend towards low twist knitting yarns, energised yarns are not such a problem.  I often leave my yarns single ply, as I'm not sure what I will do with them, or how I will dye them, or indeed if I might want to re-spin them tighter. Yes, I whack them to even out the twist, and it helps the yarn bloom and separates it out if I have been a bit enthusiastic with the hot water.

From what I have been reading about native spun weaving yarns, they don't bother with blocking as the weaving is so tight then energised singles don't get a chance to move.

One thing I MUST pass on! From a new book on Asian textiles: in some parts of Malaysia they use a hollowed out bamboo stick for a shed stick, then shoot the shuttle, which is a straight piece of wood, through the bamboo. It explains why the weavers leave the shuttle to shoot out the sides in some of the Indonesian and Malaysian weaving videos on Youtube. It also stops the weft catching on the warp sheds. Pretty nifty!

Virag (not verified)

That sounds really awesome.     What book did you find? 

Virag (not verified)

My understanding is that wpi and epi are the same thing in a warp faced piece.  At any rate its a 10 ply weight yarn.

Caroline (not verified)

Its called Handwoven Textiles of South East Asia, by Sylvia Fraser-Lu. 

It covers from Burma down to Irian Jaya, and is not so much a how-to book as a discussion on the textiles, the different techniques used to embellish them, the motifs used and their cultural significance. Loads of illustrations, and some of them you would swear could be South American except they use batik and ikat instead of warp faced weaves.

This should be fascinating reading, and a book to keep going back to, particularly as there are so many weaving videos now on Youtube.

I just thought the idea with the bamboo was such a simple solution to the problem of wefts catching on fine warp threads!

 

Aunt Janet (not verified)

As a spinning enthusiast, I must spin my own yarn for at least one of my back-strap projects.  I'm presently working on a yarn spun from my friend Ace's Romney wool that I processed in my cottage industry carder.  I don't have a pin drafter, but i decided that I don't like the way the roving spins for this project.  I'm now re-combing by hand for a smoother preparation.  If you haven't combed roving, you might be surprised at how easy it is.  One pass on the combs makes perfect top.

I'm spinning a very tight singles and then plying a three ply.  I'm still wondering if I would be better off spinning a heavier single to start with and just working with the energized single.  Well, anyway, I'm starting with the three ply.  It has a good hard twist, especially the singles.  So far I have a nice near black, and a white yarn ready to warp.  It will be second in line to the thick cotton warp I'm trying out.

Another experiment will be weaving with handspun cotton.  I have woven handspun cotton singles on my inkle loom.  It was a narrow piece with pretty fine yarn.  I had a few warp breaks, but managed to repair and finish the piece.  I used it as seam binding on a tiny blouse I made for my granddaughter.  The fabric was handwoven samples from a weaving workshop, warp commercial unmercerized cotton, weft all handspun.

So, I'd like to spin up some cotton that is more appropriate to back strap band weaving.  I guess that would be a little thicker (for my experience level), and maybe a little higher twist.  I'm not fond of plying cotton, so I'd like to try singles again.

Is anybody else weaving with their handspun yarns?  Anybody want to join me in this experiment? 

Aunt Janet, long winded this morning.

Caroline (not verified)

I haven't used my yarn as warp. At the moment I am spinning for knitting, but I fully intend to experiment with wool and alpaca on both a spindle and a wheel.

I could try playing with some of my early overspun yarns, some of them are still pretty energised, lol!

bolivian warmi

Hi Aunt Janet,

I am no spinning expert! I learned to spin in Peru with a drop spindle and bought some alpaca and a lot of llama and just go spinning that and plying for my weaving. My spinning is fairly fine but not even and I am amazed at how forgiving the warp faced weave is for handspun-I look at my finished piece and think ''I can't believe that is MY spinning!!'' Yes I have a couple of warp breaks but nothing major. I alwyas ply as that is what the indigenous weavers do here-I have never really considered alternatives.

Caroline is the spinner and will probably have some tips for you.

It is one of my plans to reproduce the designs on some pre columbian textile fragments using my handspun cotton. I learned to spin cotton in Ecuador and I am not good at it at all and need to practice much more. The family I studied with there spun and wove with thier own cotton. They made quite fine singles abut always wove with doubled threads-not plied-just two threads wound as one. I would imagine the thread that you used on your inkle loom for warp faced bands would be fine for backstrap. You must be doing well with using your heddles now and I don't think the yarn will get too much abuse from that. ''Never ever'' backstrappers tend to really yank the heddles about and abrade the yarn a lot.

You are very adventurous and I think we are all going to learn a lot from your experience with this. I do hope that someone else will join you on this project. Please keep us posted on your progress.

Laverne

Aunt Janet (not verified)

Well, great, I won't be nervous about using the handspun then.  Yes, I was pretty rough on the heddles the first couple of bands, and have relaxed some now.  I still find myself using too much pressure now and then. 

My cotton yarns in my handspun stash are pretty lightly spun.  I think i'll have to get a little more aggressive with my spinning to make cotton yarn that will be appropriate.  The wool will be nice, though.  I now have white, black and four shades of grey.  I've spun all of the white, black and one of the greys.  I started with one grey, and blended two shaded with the black, and one with the white. 

 Laverne said: "The family I studied with there spun and wove with thier own cotton. They made quite fine singles abut always wove with doubled threads-not plied-just two threads wound as one."  See, I'm not the only one who isn't fond of plying cotton.  I'll have to try this method. 

Oh, yes, Caroline!  Spin that alpaca.  I have three shades of alpaca top that I won in a speed spinning competition this summer,  guess what I am thinking!

Aunt Janet

Kristina (not verified)

 Hi Aunt Janet,

This is a great idea! I had also thought about spinning for a Backstrap project and would like to join this project. I already have some experience with spinning on dropspindle, wheel and Charkha  and did some weavings with selfspun yarn in the past. I had Laverne  already asked for the matching wool. First  I thought of using a rather rough wool , because the warp should be so heavily rotated in order to be stable enough. On pictures in the book by Calhander you can see how much obertwist is still on the warp threads, because they are singles. For weaving on floorloom with a selfspun singlewarp you need often something to stabilize the shreads . In German it`s called " Schlichte" It`s a paste of bone glue ( ugly :O) and water, which is subsequently washed out of the tapestry after finish. Instead of this you can use ironing starch.

 After spinning with wool I would wind a skein, wash and hung to dry. Cotton I think can be woven directly, or what would you do??

 I have some cotton here in white natural green and natural brown and now think, after I read your messages, that I could use it too.  

But with all project s- I´m a slow worker , because I do not regular have time for weaving or spinning , and there a mostly  some parallel projects waiting :O)

 Kristina

Aunt Janet (not verified)

Hi Kristina,

   I have put some parallel projects on hold for the moment while I'm playing with the backstrap.  There is a 30" warp hanging on my counterbalance loom, actually half dressed.  I have mountains of handspun waiting for my next weaving project.  I have a new-to-me Nilus Leclerc counterbalance loom to assemble and warp.  My roving stash is outrageous!  I have forgotten most of my knitting projects.  DH has put in his request for a new hat.  Merino, please.

   The wool I'm using is so clean, that it looks great coming off the wheel.  I can warp right up.  There shouldn't be any shrinkage problem, even if we were to wash the bands, since the weave is so tight.

I've only once used a dressing a warp.  That was linen, where I used the liquid from boiled flax seeds.  Worked great.

I wouldn't want to discourage you about spinning cotton, but, in my experience the natural colored cottons are pretty short staple.  That doesn't mean that you won't be able to spin an appropriate yarn.  You will just have to spin it fine and put in plenty of twist.  I like the idea of using two singles side by side as one warp thread.  That way your cotton holds the twist that is keeping it from falling apart, and you will get the size you need without having to spin a fat cotton thread which would be less stable.

   I think Sea Island cotton is the one that has super long staple length.  The long staple cotton can be difficult to spin just because it is long.  It takes some getting used to.  I think most of the cotton in the world will work as long as you get plenty of twist.

Happy spinning,

Aunt Janet

Kristina (not verified)

Hello Aunt Janet,

I've also done some different experiences with cotton. The best way to handle the cotton with short staple is spinning  with the Charkha. I also have a Akha spindle, but I do  rather like more to spin with the wheel. The Joy of Ashford is also good if you take the smallest translation. If you like to weave with cotton singles. Do you use them directly from the bobbin? I´m no friend of plying cotton too- except fot knitting. Last I did a little experimente with coloured cotton from cotton clouds. I knitted directly from the bobbin. But I used two different wheels to spin. On Charkha I´m spinning a single in the opposite direction as on my Joy. This was very interesting, because  while knitting  you could see the stiches going like zickzack, depending wich cotton I used.

 Greets !

Kristina

Caroline (not verified)

Kristina, that wouldn't be a Babe Liten Spindel in the photo would it?

 

Kristina (not verified)

  Yes, it is  the Babe Liten Spindle  Charkha Wheel - and love it. Found it years ago on ebay germany - what luck!!  I like it more than using a book Charkha or  Akha spindle.

Kristina

Aunt Janet (not verified)

Wow! Kristina, that is beautiful.  I love the experiment of knitting with one Stwist, and one Z twist yarn held together. That solves the slant problem, but brings up the zig zag.  Very interesting. 

I have a Bull Pup Charkha built by Alden Amos.  It spins great, but the spindle isn't removable.  That is my only complaint about it.  I can't, therefore, take the spindle out and spin directly from it.  I always have to move the yarn.  I sometimes use a paper quill to transfer the yarn.  One of my friends has borrowed the Pup for SOAR, where she is takeing a three day cotton spinning workshop from Stephanie Gaustad.  I will be picking her brain when she gets home, for more cotton spinning tips.

I like using spindles, akha style, too. I don't like to use a hook, though. I make bead, or toy wheel spindles, with a skinny dowel, or knitting needle.  These are speedy little spindles, and I can spin very fine on them.  I use one of these little toy wheel spindles to compete in fine thread competition.  Except when using my trusty Louet S75, I enjoy spinning off the point.  Besides the Pup, I have a great wheel (in need of TLC), a Pinguin-like home-made wheel, and a wide array of off-the-point type spindles, from the tiny bead spindles to the big ole Navaho types.

It's fun to make spindles out of unconventional things, too.  I have several spindles made with outdoor faucet handles for whorls which spin very well.  I've made various types of spindles from sticks and rubber bands, including turkish style.  Linda Lingon (founder of Spin-Off magazine has a you-tube video of herself making a zuccchini spindle.  It's a hoot!

Last night I put another warp on the sticks, and wove about 18" of heavy yarns in black and red.  This yarn is very easy weaving after the last stuff I've been using.  I like the drama of the black and red.  I'm putting in some weft floats in diamond patterning.

Aunt Janet weaving on

Caroline (not verified)

I have one too! Its brilliant, I love it! Its the spindle I will need to use for spinning strong yarn for weaving. I had a couple of extra spindles made to hold more yarn, and use it when i make fancy yarns with beads etc.

bolivian warmi

When I go travelling here I like to wander about in the countryside and chat with people while at the same time looking out for spindles to add to my collection. Quite often when I ask a lady if I can see her spindle she will show me a stick with half a potato on the end!

I thought that you might like to see a pcture of the family in Ecuador with whom I stayed and learned to spin and weave cotton saddle bags.

You can see that they drape the cotton on a little stand made from forked branches. There I am having a go. The whorl on my spindle is the wheel from the leg of their sewing machine table!

                               

                                                                                                  They weave a little ''basket'' from plantain fiber under the stand on

                                                                                                  which to place the spindle when not in use.                                                                                                   

Taking the thread off two spindles to make doubled thread ready for warping. I love the way she does this with the spindles in her toes!

Typical after dinner activity for all the family-taking the seeds out of the cotton and forming sheets. Then it was off to bed at 8.30!

 

 

Loominaria (not verified)

Patons Classic Wool is (was?) usually more like 10 ply, though it's been years since I added some to my collection. As you probably have noticed, there is a wide variation in what US yarn makers called 'worsted' weight (and sport, fingering, and lace weights). I wish everyone would follow the AU ply system. When I order 8 ply from AU or NZ, I know exactly what I'm getting before it arrives, and I've never been surprised. But again, it's been years since I've ordered yarn from your hemisphere. Things may have changed?

Has anyone used sock yarn for warp-faced backstrap? Some of my sock yarns seem very smooth, firm, and not stretchy.

Kurt

Aunt Janet (not verified)

Great photos, Laverne.  I'm not sure which I like the best.  The one with the spindles between toes, or the ladies picking cotton.  I'm going to have to go out and look for a three legged branch to make a cotton spinning stand.  We had a big oak tree in our front yard fall this summer.  There just could be the perfect branch set out there.  I love the potato spindle story, too. 

   I began weaving with my handspun last evening, double weave!  I need to go back to the directions again.  The handspun is working just fine.

bolivian warmi

Hi Janet,

Did you decide to use handspun wool or cotton?

As for the stands for the cotton, you will see in the first picture the size that they shoud be. The stand on its own in the other picture is a miniature that I made while I was there so that I could have something to take home with me. The top of the stand where the cotton drapes has a v-shaped notch cut into it. I use the miniature stand here but I have to place a chunk of granite in the little basket underneath to weigh it down-that works.

Aunt Janet (not verified)

I'm using three natural shades of Romney wool.   It is spun tightly, and there is no chance of any broken warp.  It is also chunky, like the heavier cotton we have been working with.  With the computer right next to me, I plowed through the directions on double weave.  It took me a few inches to catch on.  I managed to make my pattern area half width, so I'm only making one scroll pattern.  Following the graph is not too difficult, though I don't have a perfect scroll yet.  I'll make a few more till I get it right.  I'm sure speed will pick up when I get the feel of it, but it sure is slow starting out.

bolivian warmi

Slow starting out-perfectly normal-so many things going on at once.

I am working on an 8 1/2'' wide double weave piece right now with pick up all the way across and if I get even slightly distracted I do something ridiculous like pick up all the warps, put the stick in, create the new shed underneath and then realise that I forgot to pass the weft! So annoying!!

Eventually you won't have to count the squares on the chart, which is kind of slow and tedious and you will be able to read the pattern off your previously woven scrolls. You will see for example that you need to pick the white immediately to the right of the white you picked in the last row and won't need to go counting each and every warp.

So basically, hang in there-it will get faster and more efficient.

Did you see the videos on my Flikr page? They show  a slightly more efficient way of opening the shed below using your fingers rather than having the two sticks in there at once.

Later you can make a band just using one weft. I will put up the instructions. This is a suitable technique for narrow bands.

The two- weft method you are doing now with plain woven edges is more versatile I feel as you can weave wide pieces of plain weave with one or two strips of double weave on them.

Your band must be looking lovely in your handspun!

Laverne

Loominaria (not verified)

What is the purpose of respinning commercial wool?

Seems like I read about this somewhere before. Could this be covered in Rachel Brown's book?

I don't know how to spin.  Spinning tends to make yarn, and I already have too much yarn.  But I could justify REspinning to myself, since it doesn't make new yarn. It apparently improves yarn somehow, or at least it changes it from one suitability to another?

Kurt

bolivian warmi

You need to respin commercial wool to make it suitabe for warp faced weaves on the backstrap loom. The weavers here who weave warp faced on any of the traditional looms-backstrap, staked-out ground looms and oblique-respin yarn that they have bought whether it be wool or acrylic. Their handspun is highly twisted.

This is to make it smoother and firmer and, therefore, more resistant to abrasion. In warp faced weaves the warps are constantly rubbing up against each other and get abraded to a certain extent by the string heddles too. The weavers here are quite heavy handed with their warps. They often drag a pointed stick or bone tool roughly across the warps strumming them as an aid to opening the sheds so the yarns need to be able to stand up to this abuse. I don't do this strumming-I find it too rough! I prefer to just push down the warps with my thumb or fist.

Respinning smooths out a bit of the hairiness-something which can make clearing the sheds difficult as the fibers in ''hairy'' yarns mesh as the warps rub side by side and you will find that when you open the sheds there will be a weird tearing sound as you tear apart the fibers that have meshed together. The warps are generally under quite a lot of tension too and respinning helps them to stand up to this better.

i'll check my Rachel Brown to see if it is mentioned there.

Laverne 

Kristina (not verified)

  Hi, I have not forgotten that I wanted to join. Today I finally found on ebay the Lamawool ( 300gr) I wanted. For me it is fun to use authentic materials as possible.

The wool is from a German Lama. It's all funny, but in Germany, in Switzerland and Austria, there are some llama breeders. The llamas will be happy to use as companion animals for trekking with children.I'm really excited. Since I have only one color now, I'm thinking about dyeing with madder a half, maybe even with gall. Then I will have beige, red and black. Let's see.

 Hope to start spinning next week!

Kristina

bolivian warmi

Hi Kristina,

what is that you are using to dye black?-''gall''-I don't know what that is.

Thanks for putting this here and keep us posted on this project. This is great!

Laverne

 

Submitted by Anonymous (not verified) on